1. 30 Nov, 2018 12 commits
  2. 29 Nov, 2018 8 commits
    • Lyude Paul's avatar
      brcmfmac: Fix out of bounds memory access during fw load · b72c51a5
      Lyude Paul authored
      I ended up tracking down some rather nasty issues with f2fs (and other
      filesystem modules) constantly crashing on my kernel down to a
      combination of out of bounds memory accesses, one of which was coming
      from brcmfmac during module load:
      
      [   30.891382] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
      [   30.894437] ==================================================================
      [   30.901581] BUG: KASAN: global-out-of-bounds in brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
      [   30.909935] Read of size 1 at addr ffff2000024865df by task kworker/6:2/387
      [   30.916805]
      [   30.918261] CPU: 6 PID: 387 Comm: kworker/6:2 Tainted: G           O      4.20.0-rc3Lyude-Test+ #19
      [   30.927251] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
      [   30.935964] Workqueue: events brcmf_driver_register [brcmfmac]
      [   30.941641] Call trace:
      [   30.944058]  dump_backtrace+0x0/0x3e8
      [   30.947676]  show_stack+0x14/0x20
      [   30.950968]  dump_stack+0x130/0x1c4
      [   30.954406]  print_address_description+0x60/0x25c
      [   30.959066]  kasan_report+0x1b4/0x368
      [   30.962683]  __asan_report_load1_noabort+0x18/0x20
      [   30.967547]  brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
      [   30.967639]  brcmf_sdio_probe+0x163c/0x2050 [brcmfmac]
      [   30.978035]  brcmf_ops_sdio_probe+0x598/0xa08 [brcmfmac]
      [   30.983254]  sdio_bus_probe+0x190/0x398
      [   30.983270]  really_probe+0x2a0/0xa70
      [   30.983296]  driver_probe_device+0x1b4/0x2d8
      [   30.994901]  __driver_attach+0x200/0x280
      [   30.994914]  bus_for_each_dev+0x10c/0x1a8
      [   30.994925]  driver_attach+0x38/0x50
      [   30.994935]  bus_add_driver+0x330/0x608
      [   30.994953]  driver_register+0x140/0x388
      [   31.013965]  sdio_register_driver+0x74/0xa0
      [   31.014076]  brcmf_sdio_register+0x14/0x60 [brcmfmac]
      [   31.023177]  brcmf_driver_register+0xc/0x18 [brcmfmac]
      [   31.023209]  process_one_work+0x654/0x1080
      [   31.032266]  worker_thread+0x4f0/0x1308
      [   31.032286]  kthread+0x2a8/0x320
      [   31.039254]  ret_from_fork+0x10/0x1c
      [   31.039269]
      [   31.044226] The buggy address belongs to the variable:
      [   31.044351]  brcmf_firmware_path+0x11f/0xfffffffffffd3b40 [brcmfmac]
      [   31.055601]
      [   31.057031] Memory state around the buggy address:
      [   31.061800]  ffff200002486480: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
      [   31.068983]  ffff200002486500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [   31.068993] >ffff200002486580: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00
      [   31.068999]                                                     ^
      [   31.069017]  ffff200002486600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [   31.096521]  ffff200002486680: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
      [   31.096528] ==================================================================
      [   31.096533] Disabling lock debugging due to kernel taint
      
      It appears that when trying to determine the length of the string in the
      alternate firmware path, we make the mistake of not handling the case
      where the firmware path is empty correctly. Since strlen(mp_path) can
      return 0, we'll end up accessing mp_path[-1] when the firmware_path
      isn't provided through the module arguments.
      
      So, fix this by just setting the end char to '\0' by default, and only
      changing it if we have a non-zero length. Additionally, use strnlen()
      with BRCMF_FW_ALTPATH_LEN instead of strlen() just to be extra safe.
      
      Fixes: 2baa3aae ("brcmfmac: introduce brcmf_fw_alloc_request() function")
      Cc: Hante Meuleman <hante.meuleman@broadcom.com>
      Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
      Cc: Franky Lin <franky.lin@broadcom.com>
      Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
      Cc: Kalle Valo <kvalo@codeaurora.org>
      Cc: Arend Van Spriel <arend.vanspriel@broadcom.com>
      Cc: Himanshu Jha <himanshujha199640@gmail.com>
      Cc: Dan Haab <dhaab@luxul.com>
      Cc: Jia-Shyr Chuang <saint.chuang@cypress.com>
      Cc: Ian Molton <ian@mnementh.co.uk>
      Cc: <stable@vger.kernel.org> # v4.17+
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      b72c51a5
    • Hans de Goede's avatar
      brcmfmac: Call brcmf_dmi_probe before brcmf_of_probe · 554da386
      Hans de Goede authored
      ARM systems with UEFI may have both devicetree (of) and DMI data in this
      case we end up setting brcmf_mp_device.board_type twice.
      
      In this case we should prefer the devicetree data, because:
      1) The devicerree data is more reliable
      2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and
         classic uboot booting, the devicetree data is always there, so using it
         makes sure we ask for the same nvram file independent of how we booted.
      
      This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe
      call, so that the latter can override the value of the first if both are
      set.
      
      Fixes: bd1e82bb ("brcmfmac: Set board_type from DMI on x86 based ...")
      Cc: Peter Robinson <pbrobinson@gmail.com>
      Tested-and-reported-by: default avatarPeter Robinson <pbrobinson@gmail.com>
      Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      554da386
    • Dan Haab's avatar
      brcmfmac: support STA info struct v7 · 4282ff17
      Dan Haab authored
      The newest firmwares provide STA info using v7 of the struct. As v7
      isn't backward compatible, a union is needed.
      
      Even though brcmfmac does not use any of the new info it's important to
      provide the proper struct buffer. Without this change new firmwares will
      fallback to the very limited v3 instead of something in between such as
      v4.
      Signed-off-by: default avatarDan Haab <dan.haab@luxul.com>
      Reviewed-by: default avatarRafał Miłecki <rafal@milecki.pl>
      Reviewed-by: default avatarArend van Spriel <arend.vanspriel@broadcom.com>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      4282ff17
    • Priit Laes's avatar
      b43: Use cordic algorithm from kernel library · d5a43355
      Priit Laes authored
      Kernel library has a common cordic algorithm which is identical
      to internally implemented one, so use it and drop the duplicate
      implementation.
      Acked-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      d5a43355
    • Larry Finger's avatar
      b43: Fix error in cordic routine · 8ea3819c
      Larry Finger authored
      The cordic routine for calculating sines and cosines that was added in
      commit 6f98e62a ("b43: update cordic code to match current specs")
      contains an error whereby a quantity declared u32 can in fact go negative.
      
      This problem was detected by Priit Laes who is switching b43 to use the
      routine in the library functions of the kernel.
      
      Fixes: 98650454 ("b43: make cordic common (LP-PHY and N-PHY need it)")
      Reported-by: default avatarPriit Laes <plaes@plaes.org>
      Cc: Rafał Miłecki <zajec5@gmail.com>
      Cc: Stable <stable@vger.kernel.org> # 2.6.34
      Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      8ea3819c
    • Priit Laes's avatar
      brcmsmac: Use cordic-related macros from common cordic library · ea3edda9
      Priit Laes authored
      Current driver includes macro that is available from general cordic
      library. Use that and drop unused duplicate and unneeded internal
      definitions.
      Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      ea3edda9
    • Priit Laes's avatar
      lib: cordic: Move cordic macros and defines to header file · 58d81d64
      Priit Laes authored
      Now that these macros are in header file, we can eventually
      clean up the duplicate macros present in the drivers that
      utilize the same cordic algorithm implementation.
      
      Also add CORDIC_ prefix to nonprefixed macros.
      Reviewed-by: default avatarArend van Spriel <arend.vanspriel@broadcom.com>
      Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
      Acked-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      58d81d64
    • Kalle Valo's avatar
      Merge tag 'iwlwifi-next-for-kalle-2018-11-23' of... · 559afaa2
      Kalle Valo authored
      Merge tag 'iwlwifi-next-for-kalle-2018-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
      
      second batch of iwlwifi patches intended for v4.21
      
      * New FW debugging infrastructure;
      * Some more work on 802.11ax;
      * Improve support for multiple RF modules with 22000 devices;
      * Remove an unused FW parameter;
      * Other debugging improvements;
      559afaa2
  3. 23 Nov, 2018 16 commits
  4. 15 Nov, 2018 1 commit
  5. 11 Nov, 2018 3 commits