- 04 Jan, 2020 5 commits
-
-
Michal Swiatkowski authored
When the user sets itr_setting to zero from ethtool -C, the driver changes this value to default in ice_cfg_itr (for example after changing ring param). Remove code that sets default value in ice_cfg_itr and move it to place where the driver allocates q_vectors. Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
Currently we do "for (i = 0; i < pf->num_alloc_vfs; i++)" all over the place. Many other places use macros to contain this repeated for loop, So create the macro ice_for_each_vf(pf, i) that does the same thing. There were a couple places we were using one loop variable and a VF iterator, which were changed to using a local variable within the ice_for_each_vf() macro. Also in ice_alloc_vfs() we were setting pf->num_alloc_vfs after doing "for (i = 0; i < num_alloc_vfs; i++)". Instead assign pf->num_alloc_vfs right after allocating memory for the pf->vf array. Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
Brett Creeley authored
We can't have more than one default VSI so prevent another VSI from overwriting the current dflt_vsi. This was achieved by adding the following functions: ice_is_dflt_vsi_in_use() - Used to check if the default VSI is already being used. ice_is_vsi_dflt_vsi() - Used to check if VSI passed in is in fact the default VSI. ice_set_dflt_vsi() - Used to set the default VSI via a switch rule ice_clear_dflt_vsi() - Used to clear the default VSI via a switch rule. Also, there was no need to introduce any locking because all mailbox events and synchronization of switch filters for the PF happen in the service task. Signed-off-by:
-
Brett Creeley authored
There are many things wrong with the function ice_set_vf_spoofchk(). 1. The VSI being modified is the PF VSI, not the VF VSI. 2. We are enabling Rx VLAN pruning instead of Tx VLAN anti-spoof. 3. The spoofchk setting for each VF is not initialized correctly or re-initialized correctly on reset. To fix [1] we need to make sure we are modifying the VF VSI. This is done by using the vf->lan_vsi_idx to index into the PF's VSI array. To fix [2] replace setting Rx VLAN pruning in ice_set_vf_spoofchk() with setting Tx VLAN anti-spoof. To Fix [3] we need to make sure the initial VSI settings match what is done in ice_set_vf_spoofchk() for spoofchk=on. Also make sure this also works for VF reset. This was done by modifying ice_vsi_init() to account for the current spoofchk state of the VF VSI. Because of these changes, Tx VLAN anti-spoof needs to be removed from ice_cfg_vlan_pruning(). This is okay for the VF because this is now controlled from the admin enabling/disabling spoofchk. For the PF, Tx VLAN anti-spoof should not be set. This change requires us to call ice_set_vf_spoofchk() when configuring promiscuous mode for the VF which requires ice_set_vf_spoofchk() to move in order to prevent a forward declaration prototype. Also, add VLAN 0 by default when allocating a VF since the PF is unaware if the guest OS is running the 8021q module. Without this, MDD events will trigger on untagged traffic because spoofcheck is enabled by default. Due to this change, ignore add/delete messages for VLAN 0 from VIRTCHNL since this is added/deleted during VF initialization/teardown respectively and should not be modified. Signed-off-by:
-
Brett Creeley authored
Based on the work done by Alex Duyck on other Intel drivers, add code to support UDP segmentation offload (USO) for the ice driver. Signed-off-by:
-
- 03 Jan, 2020 11 commits
-
-
yu kuai authored
drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function ‘bfa_ioc_fwver_clear’: drivers/net/ethernet/brocade/bna/bfa_ioc.c:1127:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ilias Apalodimas authored
The current driver only exists on a non NUMA aware machine. With 44768dec ("page_pool: handle page recycle for NUMA_NO_NODE condition") applied we can safely change that to NUMA_NO_NODE and accommodate future NUMA aware hardware using netsec network interface Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Xu Wang authored
Passing NULL to l2tp_pernet causes a crash via BUG_ON. Dereferencing net in net_generic() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Xu Wang authored
Passing NULL to phonet_pernet causes a crash via BUG_ON. Dereferencing net in net_generic() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by:
-
Li RongQing authored
The argument is always ignored, so remove it. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: net/ethtool/linkmodes.c: In function 'ethnl_set_linkmodes': net/ethtool/linkmodes.c:326:32: warning: variable 'lsettings' set but not used [-Wunused-but-set-variable] struct ethtool_link_settings *lsettings; ^ It is never used, so remove it. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
-
Mao Wenan authored
REXMIT_NEW is a macro for "FRTO-style transmit of unsent/new packets", this patch makes it more readable. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Po Liu authored
ENETC implement time specific departure capability, which enables the user to specify when a frame can be transmitted. When this capability is enabled, the device will delay the transmission of the frame so that it can be transmitted at the precisely specified time. The delay departure time up to 0.5 seconds in the future. If the departure time in the transmit BD has not yet been reached, based on the current time, the packet will not be transmitted. This driver was loaded by Qos driver ETF. User could load it by tc commands. Here are the example commands: tc qdisc add dev eth0 root handle 1: mqprio \ num_tc 8 map 0 1 2 3 4 5 6 7 hw 1 tc qdisc replace dev eth0 parent 1:8 etf \ clockid CLOCK_TAI delta 30000 offload These example try to set queue mapping first and then set queue 7 with 30us ahead dequeue time. Then user send test frame should set SO_TXTIME feature for socket. There are also some limitations for this feature in hardware: - Transmit checksum offloads and time specific departure operation are mutually exclusive. - Time Aware Shaper feature (Qbv) offload and time specific departure operation are mutually exclusive. Signed-off-by:
Po Liu <Po.Liu@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Julia Lawall authored
Use resource_size rather than a verbose computation on the end and start fields. The semantic patch that makes these changes is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ struct resource ptr; @@ - (ptr.end + 1 - ptr.start) + resource_size(&ptr) @@ struct resource *ptr; @@ - (ptr->end + 1 - ptr->start) + resource_size(ptr) </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
The idtcm_caps structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Ben Hutchings authored
Only the SFC4000 code, now moved to sfc-falcon, needed I2C. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
- 02 Jan, 2020 18 commits
-
-
David S. Miller authored
David Ahern says: ==================== tcp: Add support for L3 domains to MD5 auth With VRF, the scope of network addresses is limited to the L3 domain the device is associated. MD5 keys are based on addresses, so proper VRF support requires an L3 domain to be considered for the lookups. Leverage the new TCP_MD5SIG_EXT option to add support for a device index to MD5 keys. The __tcpm_pad entry in tcp_md5sig is renamed to tcpm_ifindex and a new flag, TCP_MD5SIG_FLAG_IFINDEX, in tcpm_flags determines if the entry is examined. This follows what was done for MD5 and prefixes with commits 8917a777 ("tcp: md5: add TCP_MD5SIG_EXT socket option to set a key address prefix") 6797318e ("tcp: md5: add an address prefix for key lookup") Handling both a device AND L3 domain is much more complicated for the response paths. This set focuses only on L3 support - requiring the device index to be an l3mdev (ie, VRF). Support for slave devices can be added later if desired, much like the progression of support for sockets bound to a VRF and then bound to a device in a VRF. Kernel code is setup to explicitly call out that current lookup is for an L3 index, while the uapi just references a device index allowing its meaning to include other devices in the future. ==================== Signed-off-by:
-
David Ahern authored
Add tests for new TCP MD5 API for L3 domains (VRF). A new namespace is added to create a duplicate configuration between the VRF and default VRF to verify overlapping config is handled properly. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Add tests for existing TCP MD5 APIs - both single address config and the new extended API for prefixes. Signed-off-by:
-
David Ahern authored
Update nettest to implement TCP_MD5SIG_EXT for a prefix and a device. Add a new option, -m, to specify a prefix and length to use with MD5 auth. The device option comes from the existing -d option. If either are set and MD5 auth is requested, TCP_MD5SIG_EXT is used instead of TCP_MD5SIG. Signed-off-by:
-
David Ahern authored
On failure to set MD5 password, do_server should return 1 so that the program exits with 1 rather than 255. This used for negative testing when adding MD5 with device option. Signed-off-by:
-
David Ahern authored
Add support for userspace to specify a device index to limit the scope of an entry via the TCP_MD5SIG_EXT setsockopt. The existing __tcpm_pad is renamed to tcpm_ifindex and the new field is only checked if the new TCP_MD5SIG_FLAG_IFINDEX is set in tcpm_flags. For now, the device index must point to an L3 master device (e.g., VRF). The API and error handling are setup to allow the constraint to be relaxed in the future to any device index. Signed-off-by:
-
David Ahern authored
Add l3index to tcp_md5sig_key to represent the L3 domain of a key, and add l3index to tcp_md5_do_add and tcp_md5_do_del to fill in the key. With the key now based on an l3index, add the new parameter to the lookup functions and consider the l3index when looking for a match. The l3index comes from the skb when processing ingress packets leveraging the helpers created for socket lookups, tcp_v4_sdif and inet_iif (and the v6 variants). When the sdif index is set it means the packet ingressed a device that is part of an L3 domain and inet_iif points to the VRF device. For egress, the L3 domain is determined from the socket binding and sk_bound_dev_if. Signed-off-by:
-
David Ahern authored
The original ingress device index is saved to the cb space of the skb and the cb is moved during tcp processing. Since tcp_v4_inbound_md5_hash can be called before and after the cb move, pass dif and sdif to it so the caller can save both prior to the cb move. Both are used by a later patch. Signed-off-by:
-
David Ahern authored
The original ingress device index is saved to the cb space of the skb and the cb is moved during tcp processing. Since tcp_v6_inbound_md5_hash can be called before and after the cb move, pass dif and sdif to it so the caller can save both prior to the cb move. Both are used by a later patch. Signed-off-by:
-
David Ahern authored
Extract the typecast to (union tcp_md5_addr *) to a local variable rather than the current long, inline declaration with function calls. No functional change intended. Signed-off-by:
-
Niu Xilei authored
Fixed Coding function and style issues Signed-off-by:
Niu Xilei <niu_xilei@163.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Allow setting default port priority Petr says: When LLDP APP TLV selector 1 (EtherType) is used with PID of 0, the corresponding entry specifies "default application priority [...] when application priority is not otherwise specified." mlxsw currently supports this type of APP entry, but uses it only as a fallback for unspecified DSCP rules. However non-IP traffic is prioritized according to port-default priority, not according to the DSCP-to-prio tables, and thus it's currently not possible to prioritize such traffic correctly. This patchset extends the use of the abovementioned APP entry to also set default port priority (in patches #1 and #2) and then (in patch #3) adds a selftest. ==================== Signed-off-by: -
Petr Machata authored
Send non-IP traffic to a port and observe that it gets prioritized according to the lldptool app=$prio,1,0 rules. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
When APP TLV selector 1 (EtherType) is used with PID of 0, the corresponding entry specifies "default application priority [...] when application priority is not otherwise specified." mlxsw currently supports this type of APP entry, but uses it only as a fallback for unspecified DSCP rules. However non-IP traffic is prioritized according to port-default priority, not according to the DSCP-to-prio tables, and thus it's currently not possible to prioritize such traffic correctly. Extend the use of the abovementioned APP entry to also set default port priority. Signed-off-by:
-
Petr Machata authored
Add QPDP. This register controls the port default Switch Priority and Color. The default Switch Priority and Color are used for frames where the trust state uses default values. Currently there are two cases where this applies: a port is in trust-PCP state, but a packet arrives untagged; and a port is in trust-DSCP state, but a non-IP packet arrives. Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== page_pool: NUMA node handling fixes The recently added NUMA changes (merged for v5.5) to page_pool, it both contains a bug in handling NUMA_NO_NODE condition, and added code to the fast-path. This patchset fixes the bug and moves code out of fast-path. The first patch contains a fix that should be considered for 5.5. The second patch reduce code size and overhead in case CONFIG_NUMA is disabled. Currently the NUMA_NO_NODE setting bug only affects driver 'ti_cpsw' (drivers/net/ethernet/ti/), but after this patchset, we plan to move other drivers (netsec and mvneta) to use NUMA_NO_NODE setting. ==================== Signed-off-by: -
Jesper Dangaard Brouer authored
When kernel is compiled without NUMA support, then page_pool NUMA config setting (pool->p.nid) doesn't make any practical sense. The compiler cannot see that it can remove the code paths. This patch avoids reading pool->p.nid setting in case of !CONFIG_NUMA, in allocation and numa check code, which helps compiler to see the optimisation potential. It leaves update code intact to keep API the same. $ ./scripts/bloat-o-meter net/core/page_pool.o-numa-enabled \ net/core/page_pool.o-numa-disabled add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-113 (-113) Function old new delta page_pool_create 401 398 -3 __page_pool_alloc_pages_slow 439 426 -13 page_pool_refill_alloc_cache 425 328 -97 Total: Before=3611, After=3498, chg -3.13% Signed-off-by: -
Jesper Dangaard Brouer authored
The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610 ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610 ("page_pool: Don't recycle non-reusable pages") Reported-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
- 01 Jan, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-12-31 This series contains updates to e1000e, igb and igc only. Robert Beckett provide an igb change to assist in keeping packets from being dropped due to receive descriptor ring being full when receive flow control is enabled. Create a separate function to setup SRRCTL to ease in reuse and ensure that setting of the drop enable bit only if receive flow control is not enabled. Sasha adds support for scatter gather support in igc. Improve the direct memory address mapping flow by optimizing/simplifying and more clear. Update igc to use pci_release_mem_regions() instead of pci_release_selected_regions(). Clean up function header comments to align with the actual code. Adds support for 64 bit DMA access, to help handle socket buffer fragments in high memory. Adds legacy power management support in igc by implementing suspend, resume, runtime_suspend/resume, and runtime_idle callbacks. Clean up references to Serdes interface in igc since that interface is not supported for i225 devices. Alex replaces the pr_info calls with netdev_info in all cases related to netdev link state, as suggested by Joe Perches. ==================== Signed-off-by:
-
- 31 Dec, 2019 5 commits
-
-
Sasha Neftin authored
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Alexander Duyck authored
Replace the pr_info calls with netdev_info in all cases related to the netdevice link state. As a result of this patch the link messages will change as shown below. Before: e1000e: ens3 NIC Link is Down e1000e: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx After: e1000e 0000:00:03.0 ens3: NIC Link is Down e1000e 0000:00:03.0 ens3: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Tested-by:
-
Sasha Neftin authored
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by:
kbuild test robot <lpk@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: -
Sasha Neftin authored
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by:
-
