Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with
following components:

USB bridge: Empia EM28274 (chip id is the same as EM28174)
Demodulator: 2x Silicon Labs Si2168-B40
Tuner: 2x Silicon Labs Si2157-A30

This patch adds support only for the first tuner.

The demodulator needs firmware, available for example here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/

The demodulators sit on the same I2C bus and their addresses
are 0x64 and 0x67. The tuners are behind the demodulators and
their addresses are 0x60 and 0x63.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add missing USB id's for em281xx devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Some new boards were added without updating those lists.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

au0828_v4l2_device_register() unlocks au0828_dev->lock and frees au0828
dev in error legs before return. au0828_usb_probe() does the same when
au0828_v4l2_device_register() returns error.

Fix au0828_v4l2_device_register() to not to unlock and free in its error
legs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

c8sectpfe driver relied on CONFIG_FW_LOADER_USER_HELPER_FALLBACK option
for loading its xp70 firmware. A previous commit removed this Kconfig
option, as it is apparently harmful, but did not update the driver
code which relied on it.

This patch reworks the firmware loading into the start_feed callback.
At this point we can be sure the rootfs is present, thereby removing
the depedency on CONFIG_FW_LOADER_USER_HELPER_FALLBACK.

Fixes: 79f5b6ae ('[media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK')
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

During the review process, a regression was intoduced in the
circular buffer write pointer management. This means that wp
doesn't get managed properly once the buffer becomes full.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Linux 4.6-rc7

* tag 'v4.6-rc7': (185 commits)
  Linux 4.6-rc7
  parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  mailmap: add John Paul Adrian Glaubitz
  byteswap: try to avoid __builtin_constant_p gcc bug
  lib/stackdepot: avoid to return 0 handle
  mm: fix kcompactd hang during memory offlining
  modpost: fix module autoloading for OF devices with generic compatible property
  proc: prevent accessing /proc/<PID>/environ until it's ready
  mm/zswap: provide unique zpool name
  mm: thp: kvm: fix memory corruption in KVM with THP enabled
  MAINTAINERS: fix Rajendra Nayak's address
  mm, cma: prevent nr_isolated_* counters from going negative
  mm: update min_free_kbytes from khugepaged after core initialization
  huge pagecache: mmap_sem is unlocked when truncation splits pmd
  rapidio/mport_cdev: fix uapi type definitions
  mm: memcontrol: let v2 cgroups follow changes in system swappiness
  mm: thp: correct split_huge_pages file permission
  maintainers: update rmk's email address(es)
  writeback: Fix performance regression in wb_over_bg_thresh()
  ...

Pull misc driver fixes from Gfreg KH:
 "Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Pull IIO driver fixes from Grek KH:
 "It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Pull USB fixes from Greg KH:
 "Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Pull rdma fix from Doug Ledford:
 "Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/iser: Fix max_sectors calculation

Only MEDIA_IOC_ENUM_LINKS32 require an special logic when
userspace is 32 bits and Kernel is 64 bits.

For the rest, media_device_ioctl() will do the right thing,
and will return -ENOIOCTLCMD if the ioctl is unknown.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The extraneous assignment on bt is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

A couple of data structures in the dibusb-common file are only
accessed when CONFIG_DVB_DIB3000MC is enabled, otherwise we
get a harmless gcc warning:

usb/dvb-usb/dibusb-common.c:223:34: error: 'dib3000p_panasonic_agc_config' defined but not used
usb/dvb-usb/dibusb-common.c:211:32: error: 'stk3000p_dib3000p_config' defined but not used

This moves the existing #ifdef a few lines up to correctly cover
all the conditional data structures, which gets rid of the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

of_graph_get_next_endpoint(node, ep) decrements refcount on
ep. When next==NULL we break and refcount on ep is decremented
again.
Signed-off-by: Franck Jullien <franck.jullien@odyssee-systemes.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Callbacks invoked from put_device() may free the struct media_devnode
pointer, so any cleanup needs to be done before put_device().
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

After media_devnode_unregister(), the struct media_device may be freed
already, and dereferencing it may crash.
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

CONFIG_DEBUG_KOBJECT_RELEASE found this bug.
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of always return -ENOMEM, return the real error that should
come from media_create_pad_link().
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

struct ir_raw_event currently has a size of 12 bytes on most (all?)
architectures. This can be reduced to 8 bytes whilst maintaining
full backwards compatibility.
This saves 2KB in size of struct ir_raw_event_ctrl (as element
kfifo is reduced by 512 * 4 bytes) and it allows to copy the
full struct ir_raw_event with a single 64 bit operation.

Successfully tested with the Nuvoton driver and successfully
compile-tested with the ene_ir driver (as it uses the carrier /
duty_cycle elements).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add USB ID of SMK RXX6000 series IR receiver. Often branded as
Lenovo receiver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

New USB ID for Adaptec eHome receiver in some HP laptops.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Access to dev->initialized is atomic and dev->initialized isn't
accessed in any other code protected by this mutex.
Therefore we don't need to get the mutex here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

2008-02-25 Andre Weidemann added support for TT S2-3600 and noted
that he still gets image distortions every now and then.

It seems to be common knowledge in many projects that changing
the USB parameters seems to help. OpenELEC has included this patch
for a few years, for example. Nobody bothered to report the issue
upstream though, it seems.

https://github.com/OpenELEC/OpenELEC.tv/issues/1957
http://www.vdr-portal.de/board60-linux/board14-betriebssystem/board96-yavdr/p1033458-darstellungsproblem-bei-2-tt-3600-usb/#post1033458 (in German)
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The ds3000 driver returned 1 as an error code in many places.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove the if..else statement from smipcie-ir.c and add the remote
controller map as a configuration parameter for the card.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Modify the printout for MAC address to be more vendor agnostic.
Print also the port number.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for TechnoTrend TT-budget S2-4200 Twin DVB-S2 tuner. The
device seems to be rather similar to DVBSky S952 V3. This is a PCIe
card with 2 tuners. SMI PCIe bridge is used and the card has two
Montage M88RS6000 demod/tuners.

The M88RS6000 demod/tuner package needs firmware. You can download
one here:
http://palosaari.fi/linux/v4l-dvb/firmware/M88RS6000/Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Max Nibble <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Passing overlapping source and destination to snprintf is
fragile. Replace with a single (mostly) equivalent call. If one wants
to preserve the space preceding udev->product whether or not there was
a manufacturer, just remove udev->manufacturer from the && expression.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Appending to a string by doing snprintf(buf, bufsize, "%s...", buf,
...) is not guaranteed to work.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Used memory mapped eeprom offsets were off-by 8 bytes.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

PX-BCUD has the following components:
   USB interface: Empia EM28178
   Demodulator: Toshiba TC90532 (works by code for TC90522)
   Tuner: Next version of Sharp QM1D1C0042

em28xx_dvb_init(): add init code for PLEX PX-BCUD with calling
px_bcud_init() that does things like pin configuration.

qm1d1c0042_init(): support the next version of QM1D1C0042, change to
choose an appropriate array of initial registers by reading chip id.

[mchehab@osg.samsung.com: fold a fixup patch and fix checkpatch.pl
 errors/warnings, where applicable]
Signed-off-by: Satoshi Nagahama <sattnag@aim.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Pull writeback fix from Jens Axboe:
 "Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull x86 fixes from Ingo Molnar:
 "This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers