It makes sense to allow changes to get/set rx flow hash callback only
when rss is enabled. This patch restricts get_rss_hash_opts and
set_rss_hash_opts methods to allow querying and configuring different
Rx flow hash configurations only when rss is enabled
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

add support to change TX/RX queue number with "ethtool -L combined".

V5 -> V6: remove check for carrier in hinic_xmit_frame
V4 -> V5: change time zone in patch header
V3 -> V4: update date in patch header
V2 -> V3: remove check for zero channels->combined_count
V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined")
V0 -> V1: remove check for channels->tx_count/rx_count/other_count
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-06-02

The following pull-request contains BPF _fixes-only_ for your *net-next*
tree.

We've added 10 non-merge commits during the last 1 day(s) which contain
a total of 15 files changed, 229 insertions(+), 74 deletions(-).

The main changes are:

1) Several fixes to s390 BPF JIT e.g. fixing kernel panic when BPF stack is
   not 8-byte aligned, from Ilya Leoshkevich.

2) Fix bpf_skb_adjust_room() helper's CHECKSUM_UNNECESSARY handling which
   was wrongly bypassing TCP checksum verification, from Daniel Borkmann.

3) Fix tools/bpf/ build under MAKEFLAGS=rR which causes built-in CXX and
   others vars to be undefined, also from Ilya Leoshkevich.

4) Fix BPF ringbuf's selftest shared sample_cnt variable to avoid compiler
   optimizations on it, from Andrii Nakryiko.

5) Fix up test_verifier selftest due to addition of rx_queue_mapping to
   the bpf_sock structure, from Alexei Starovoitov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(CXX) to be undefined, which in turn causes
the build to fail with

  CXX      test_cpp
/bin/sh: 2: g: not found

Fix by adding a default $(CXX) value, like tools/build/feature/Makefile
already does.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-3-iii@linux.ibm.com

When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn
causes the build to fail with

  CC       kselftest/bpf/tools/build/bpftool/map_perf_ring.o
/bin/sh: 1: -MMD: not found

Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com

Since commit 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work") 44 verifier tests fail on s390 due to not having
bpf_probe_read anymore. Fix by using bpf_probe_read_kernel.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602174448.2501214-1-iii@linux.ibm.com

Currently used 0x0000 filler confuses bfd disassembler, making bpftool
prog dump xlated output nearly useless. Fix by using a real instruction.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602174555.2501389-1-iii@linux.ibm.com

Certain kernel functions (e.g. get_vtimer/set_vtimer) cause kernel
panic when the stack is not 8-byte aligned. Currently JITed BPF programs
may trigger this by allocating stack frames with non-rounded sizes and
then being interrupted. Fix by using rounded fp->aux->stack_depth.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602174339.2501066-1-iii@linux.ibm.com

Adjust verifier test due to addition of new field.

Fixes: c3c16f2e ("bpf: Add rx_queue_mapping to bpf_sock")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Make sample_cnt volatile to fix possible selftests failure due to compiler
optimization preventing latest sample_cnt value to be visible to main thread.
sample_cnt is incremented in background thread, which is then joined into main
thread. So in terms of visibility sample_cnt update is ok. But because it's
not volatile, compiler might make optimizations that would prevent main thread
to see latest updated value. Fix this by marking global variable volatile.

Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200602050349.215037-1-andriin@fb.com

Daniel Borkmann says:

====================
This series fixes an issue originally reported by Lorenz Bauer where using
the bpf_skb_adjust_room() helper hid a checksum bug since it wasn't adjusting
CHECKSUM_UNNECESSARY's skb->csum_level after decap. The fix is two-fold:
 i) We do a safe reset in bpf_skb_adjust_room() to CHECKSUM_NONE with an opt-
    out flag BPF_F_ADJ_ROOM_NO_CSUM_RESET.
ii) We add a new bpf_csum_level() for the latter in order to allow users to
    manually inc/dec the skb->csum_level when needed.
The series is rebased against latest bpf-next tree. It can be applied there,
or to bpf after the merge win sync from net-next.

Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adapt bpf_skb_adjust_room() to pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag and
use the new bpf_csum_level() helper to inc/dec the checksum level by one after
the encap/decap.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/e7458f10e3f3d795307cbc5ad870112671d9c6f7.1591108731.git.daniel@iogearbox.net

Add a bpf_csum_level() helper which BPF programs can use in combination
with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET
flag to the latter to avoid falling back to CHECKSUM_NONE.

The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels
via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary()
on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's
csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the
current level. Without this helper, there is no way to otherwise adjust the
skb->csum_level. I did not add an extra dummy flags as there is plenty of free
bitspace in level argument itself iff ever needed in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/279ae3717cb3d03c0ffeb511493c93c450a01e1a.1591108731.git.daniel@iogearbox.net

Lorenz recently reported:

  In our TC classifier cls_redirect [0], we use the following sequence of
  helper calls to decapsulate a GUE (basically IP + UDP + custom header)
  encapsulated packet:

    bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO)
    bpf_redirect(skb->ifindex, BPF_F_INGRESS)

  It seems like some checksums of the inner headers are not validated in
  this case. For example, a TCP SYN packet with invalid TCP checksum is
  still accepted by the network stack and elicits a SYN ACK. [...]

  That is, we receive the following packet from the driver:

    | ETH | IP | UDP | GUE | IP | TCP |
    skb->ip_summed == CHECKSUM_UNNECESSARY

  ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading.
  On this packet we run skb_adjust_room_mac(-encap_len), and get the following:

    | ETH | IP | TCP |
    skb->ip_summed == CHECKSUM_UNNECESSARY

  Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing
  into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is
  turned into a no-op due to CHECKSUM_UNNECESSARY.

The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally,
it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does
not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original
skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now
there is no way to adjust the skb->csum_level. NICs that have checksum offload
disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected.

Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and
add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users
from opting out. Opting out is useful for the case where we don't remove/add
full protocol headers, or for the case where a user wants to adjust the csum
level manually e.g. through bpf_csum_level() helper that is added in subsequent
patch.

The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF
bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally
as well but doesn't change layers, only transitions between v4 to v6 and vice
versa, therefore no adoption is required there.

  [0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/

Fixes: 2be7e212 ("bpf: add bpf_skb_adjust_room helper")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/CACAyw9-uU_52esMd1JjuA80fRPHJv5vsSg8GnfW3t_qDU4aVKQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/11a90472e7cce83e76ddbfce81fdfce7bfc68808.1591108731.git.daniel@iogearbox.net

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-06-01

The following pull-request contains BPF updates for your *net-next* tree.

We've added 55 non-merge commits during the last 1 day(s) which contain
a total of 91 files changed, 4986 insertions(+), 463 deletions(-).

The main changes are:

1) Add rx_queue_mapping to bpf_sock from Amritha.

2) Add BPF ring buffer, from Andrii.

3) Attach and run programs through devmap, from David.

4) Allow SO_BINDTODEVICE opt in bpf_setsockopt, from Ferenc.

5) link based flow_dissector, from Jakub.

6) Use tracing helpers for lsm programs, from Jiri.

7) Several sk_msg fixes and extensions, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sparse reports a warning at efx_ef10_try_update_nic_stats_vf()
warning: context imbalance in efx_ef10_try_update_nic_stats_vf()
	- unexpected unlock
The root cause is the missing annotation at
efx_ef10_try_update_nic_stats_vf()
Add the missing _must_hold(&efx->stats_lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extends support to IPv6 for Inline TLS server.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>

v1->v2:
- cc'd tcp folks.

v2->v3:
- changed EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
Signed-off-by: David S. Miller <davem@davemloft.net>

Ayush Sawal says:

====================
Fixing compilation warnings and errors

Patch 1: Fixes the warnings seen when compiling using sparse tool.

Patch 2: Fixes a cocci check error introduced after commit
567be3a5 ("crypto: chelsio -
Use multiple txq/rxq per tfm to process the requests").

V1->V2

patch1: Avoid type casting by using get_unaligned_be32() and
    	put_unaligned_be16/32() functions.

patch2: Modified subject of the patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes an error observed after running coccinile check.
drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable:
"err". Return "0" on line 1480

This line is missed in the commit 567be3a5 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").

Fixes: 567be3a5 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").

V1->V2
-Modified subject.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the compilation warnings displayed by sparse tool for
chcr driver.

V1->V2

Avoid type casting by using get_unaligned_be32() and
put_unaligned_be16/32() functions.

The key which comes from stack is an u8 byte stream so we store it in
an unsigned char array(ablkctx->key). The function get_aes_decrypt_key()
is a used to calculate  the reverse round key for decryption, for this
operation the key has to be divided into 4 bytes, so to extract 4 bytes
from an u8 byte stream and store it in an u32 variable, get_aligned_be32()
is used. Similarly for copying back the key from u32 variable to the
original u8 key stream, put_aligned_be32() is used.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Error messages seen while building kernel with CONFIG_IPV6
disabled.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current design enables ktls setting from start, which is not
efficient. Now the feature will be enabled when user demands
TLS offload on any interface.

v1->v2:
- taking ULD module refcount till any single connection exists.
- taking rtnl_lock() before clearing tls_devops.

v2->v3:
- cxgb4 is now registering to tlsdev_ops.
- module refcount inc/dec in chcr.
- refcount is only for connections.
- removed new code from cxgb_set_feature().

v3->v4:
- fixed warning message.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present.
Previously the checking logic looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol != IPPROTO_TCP)
	break;

After commit b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP
was blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;
	break;
else
	break;

Then after commit 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation")
UDP/UDPLITE were blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;

if (sk->sk_protocol != IPPROTO_TCP)
	break;

Fix it by using Eric's code and simply remove the break in TCP check, which
looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;
else
	break;

Fixes: 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc_sendstream() may send zero length packet, then tipc_msg_append()
do not alloc skb, skb_peek_tail() will get NULL, msg_set_ack_required
will trigger NULL pointer dereference.

Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com
Fixes: 0a3e060f ("tipc: add test for Nagle algorithm effectiveness")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Sitnicki says:

====================
One of the pieces of feedback from recent review of BPF hooks for socket
lookup [0] was that new program types should use bpf_link-based
attachment.

This series introduces new bpf_link type for attaching to network
namespace. All link operations are supported. Errors returned from ops
follow cgroup example. Patch 4 description goes into error semantics.

The major change in v2 is a switch away from RCU to mutex-only
synchronization. Andrii pointed out that it is not needed, and it makes
sense to keep locking straightforward.

Also, there were a couple of bugs in update_prog and fill_info initial
implementation, one picked up by kbuild. Those are now fixed. Tests have
been extended to cover them. Full changelog below.

Series is organized as so:

Patches 1-3 prepare a space in struct net to keep state for attached BPF
programs, and massage the code in flow_dissector to make it attach type
agnostic, to finally move it under kernel/bpf/.

Patch 4, the most important one, introduces new bpf_link link type for
attaching to network namespace.

Patch 5 unifies the update error (ENOLINK) between BPF cgroup and netns.

Patches 6-8 make libbpf and bpftool aware of the new link type.

Patches 9-12 Add and extend tests to check that link low- and high-level
API for operating on links to netns works as intended.

Thanks to Alexei, Andrii, Lorenz, Marek, and Stanislav for feedback.

-jkbs

[0] https://lore.kernel.org/bpf/20200511185218.1422406-1-jakub@cloudflare.com/

Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Marek Majkowski <marek@cloudflare.com>
Cc: Stanislav Fomichev <sdf@google.com>

v1 -> v2:

- Switch to mutex-only synchronization. Don't rely on RCU grace period
  guarantee when accessing struct net from link release / update /
  fill_info, and when accessing bpf_link from pernet pre_exit
  callback. (Andrii)
- Drop patch 1, no longer needed with mutex-only synchronization.
- Don't leak uninitialized variable contents from fill_info callback
  when link is in defunct state. (kbuild)
- Make fill_info treat the link as defunct (i.e. no attached netns) when
  struct net refcount is 0, but link has not been yet auto-detached.
- Add missing BPF_LINK_TYPE define in bpf_types.h for new link type.
- Fix link update_prog callback to update the prog that will run, and
  not just the link itself.
- Return EEXIST on prog attach when link already exists, and on link
  create when prog is already attached directly. (Andrii)
- Return EINVAL on prog detach when link is attached. (Andrii)
- Fold __netns_bpf_link_attach into its only caller. (Stanislav)
- Get rid of a wrapper around container_of() (Andrii)
- Use rcu_dereference_protected instead of rcu_access_pointer on
  update-side. (Stanislav)
- Make return-on-success from netns_bpf_link_create less
  confusing. (Andrii)
- Adapt bpf_link for cgroup to return ENOLINK when updating a defunct
  link. (Andrii, Alexei)
- Order new exported symbols in libbpf.map alphabetically (Andrii)
- Keep libbpf's "failed to attach link" warning message clear as to what
  we failed to attach to (cgroup vs netns). (Andrii)
- Extract helpers for printing link attach type. (bpftool, Andrii)
- Switch flow_dissector tests to BPF skeleton and extend them to
  exercise link-based flow dissector attachment. (Andrii)
- Harden flow dissector attachment tests with prog query checks after
  prog attach/detach, or link create/update/close.
- Extend flow dissector tests to cover fill_info for defunct links.
- Rebase onto recent bpf-next
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Extend the existing flow_dissector test case to run tests once using direct
prog attachments, and then for the second time using indirect attachment
via link.

The intention is to exercises the newly added high-level API for attaching
programs to network namespace with links (bpf_program__attach_netns).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-13-jakub@cloudflare.com

Switch flow dissector test setup from custom BPF object loader to BPF
skeleton to save boilerplate and prepare for testing higher-level API for
attaching flow dissector with bpf_link.

To avoid depending on program order in the BPF object when populating the
flow dissector PROG_ARRAY map, change the program section names to contain
the program index into the map. This follows the example set by tailcall
tests.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-12-jakub@cloudflare.com

test_flow_dissector leaves a TAP device after it's finished, potentially
interfering with other tests that will run after it. Fix it by closing the
TAP descriptor on cleanup.

Fixes: 0905beec ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-11-jakub@cloudflare.com

Extend the existing test case for flow dissector attaching to cover:

 - link creation,
 - link updates,
 - link info querying,
 - mixing links with direct prog attachment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-10-jakub@cloudflare.com

Make `bpf link show` aware of new link type, that is links attached to
netns. When listing netns-attached links, display netns inode number as its
identifier and link attach type.

Sample session:

  # readlink /proc/self/ns/net
  net:[4026532251]
  # bpftool prog show
  357: flow_dissector  tag a04f5eef06a7f555  gpl
          loaded_at 2020-05-30T16:53:51+0200  uid 0
          xlated 16B  jited 37B  memlock 4096B
  358: flow_dissector  tag a04f5eef06a7f555  gpl
          loaded_at 2020-05-30T16:53:51+0200  uid 0
          xlated 16B  jited 37B  memlock 4096B
  # bpftool link show
  108: netns  prog 357
          netns_ino 4026532251  attach_type flow_dissector
  # bpftool link -jp show
  [{
          "id": 108,
          "type": "netns",
          "prog_id": 357,
          "netns_ino": 4026532251,
          "attach_type": "flow_dissector"
      }
  ]

  (... after netns is gone ...)

  # bpftool link show
  108: netns  prog 357
          netns_ino 0  attach_type flow_dissector
  # bpftool link -jp show
  [{
          "id": 108,
          "type": "netns",
          "prog_id": 357,
          "netns_ino": 0,
          "attach_type": "flow_dissector"
      }
  ]
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-9-jakub@cloudflare.com

Code for printing link attach_type is duplicated in a couple of places, and
likely will be duplicated for future link types as well. Create helpers to
prevent duplication.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-8-jakub@cloudflare.com

Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create
an FD-based kernel bpf_link, for attach types tied to network namespace,
that is BPF_FLOW_DISSECTOR for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com

Failure to update a bpf_link because it has been auto-detached by a dying
cgroup currently results in EINVAL error, even though the arguments passed
to bpf() syscall are not wrong.

bpf_links attaching to netns in this case will return ENOLINK, which
carries the message that the link is no longer attached to anything.

Change cgroup bpf_links to do the same to keep the uAPI errors consistent.

Fixes: 0c991ebc ("bpf: Implement bpf_prog replacement for an active bpf_cgroup_link")
Suggested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-6-jakub@cloudflare.com

Extend bpf() syscall subcommands that operate on bpf_link, that is
LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to
network namespaces (only flow dissector at the moment).

Link-based and prog-based attachment can be used interchangeably, but only
one can exist at a time. Attempts to attach a link when a prog is already
attached directly, and the other way around, will be met with -EEXIST.
Attempts to detach a program when link exists result in -EINVAL.

Attachment of multiple links of same attach type to one netns is not
supported with the intention to lift the restriction when a use-case
presents itself. Because of that link create returns -E2BIG when trying to
create another netns link, when one already exists.

Link-based attachments to netns don't keep a netns alive by holding a ref
to it. Instead links get auto-detached from netns when the latter is being
destroyed, using a pernet pre_exit callback.

When auto-detached, link lives in defunct state as long there are open FDs
for it. -ENOLINK is returned if a user tries to update a defunct link.

Because bpf_link to netns doesn't hold a ref to struct net, special care is
taken when releasing, updating, or filling link info. The netns might be
getting torn down when any of these link operations are in progress. That
is why auto-detach and update/release/fill_info are synchronized by the
same mutex. Also, link ops have to always check if auto-detach has not
happened yet and if netns is still alive (refcnt > 0).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com

Move functions to manage BPF programs attached to netns that are not
specific to flow dissector to a dedicated module named
bpf/net_namespace.c.

The set of functions will grow with the addition of bpf_link support for
netns attached programs. This patch prepares ground by creating a place
for it.

This is a code move with no functional changes intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-4-jakub@cloudflare.com

In order to:

 (1) attach more than one BPF program type to netns, or
 (2) support attaching BPF programs to netns with bpf_link, or
 (3) support multi-prog attach points for netns

we will need to keep more state per netns than a single pointer like we
have now for BPF flow dissector program.

Prepare for the above by extracting netns_bpf that is part of struct net,
for storing all state related to BPF programs attached to netns.

Turn flow dissector callbacks for querying/attaching/detaching a program
into generic ones that operate on netns_bpf. Next patch will move the
generic callbacks into their own module.

This is similar to how it is organized for cgroup with cgroup_bpf.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-3-jakub@cloudflare.com

Split out the part of attach callback that happens with attach/detach lock
acquired. This structures the prog attach callback in a way that opens up
doors for moving the locking out of flow_dissector and into generic
callbacks for attaching/detaching progs to netns in subsequent patches.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-2-jakub@cloudflare.com

On systems with recent enough glibc, reallocarray compat won't kick in, so
reallocarray() itself has to come from stdlib.h include. But _GNU_SOURCE is
necessary to enable it. So add it.

Fixes: bf99c936 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200601202601.2139477-1-andriin@fb.com

Currenty lsm uses bpf_tracing_func_proto helpers which do
not include stack trace or perf event output. It's useful
to have those for bpftrace lsm support [1].

Using tracing_prog_func_proto helpers for lsm programs.

[1] https://github.com/iovisor/bpftrace/pull/1347Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200531154255.896551-1-jolsa@kernel.org

In order to use standard 'xdp' prefix, rename convert_to_xdp_frame
utility routine in xdp_convert_buff_to_frame and replace all the
occurrences
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org