- 11 Feb, 2007 40 commits
-
-
Ingo Molnar authored
gcc emits this warning: kernel/auditfilter.c: In function 'audit_filter_user': kernel/auditfilter.c:1611: warning: 'state' is used uninitialized in this function I tend to agree with gcc - there are a couple of plausible exit paths from audit_filter_user_rules() where it does not set 'state', keeping the variable uninitialized. For example if a filter rule has an AUDIT_POSSIBLE action. Initialize to 'wont audit'. Fix whitespace damage too. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Sandeen authored
In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by:
-
Eric Sandeen authored
In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by:
-
Adrian Bunk authored
- no longer a userspace header - add #include <linux/types.h> for in-kernel compilation Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Matthias Fuchs authored
Add support for the CPCI-ASIO4 quad port CompactPCI UART board from electronic system design gmbh. Signed-off-by:
Matthias Fuchs <matthias.fuchs@esd-electronics.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Thomas Hoehn authored
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for testing. Signed-off-by:
Thomas Hoehn <thomas.hoehn@avocent.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Randy Dunlap authored
- in man and text mode output, if the function return type is empty (like it is for macros), don't print the return type and a following space; this fixes an output malalignment; - in the function short description, strip leading, trailing, and multiple embedded spaces (to one space); this makes function name/description output spacing consistent; - fix a comment typo; Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Cleanup kernel-doc notation in drivers/firmware/edd.c. Add edd.c to DocBook/kernel-api.tmpl. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
David Brownell authored
This is an "RTC framework" driver for the "CMOS" RTCs which are standard on PCs and some other platforms. That's MC146818 compatible silicon. Advantages of this vs. drivers/char/rtc.c (use one _or_ the other, only one will be able to claim the RTC irq) include: - This leverages both the new RTC framework and the driver model; both PNPACPI and platform device modes are supported. (A separate patch creates a platform device on PCs where PNPACPI isn't configured.) - It supports common extensions like longer alarms. (A separate patch exports that information from ACPI through platform_data.) - Likewise, system wakeup events use "real driver model support", with policy control via sysfs "wakeup" attributes and and using normal rtc ioctls to manage wakeup. (Patch in the works. The ACPI hooks are known; /proc/acpi/alarm can vanish. Making it work with EFI will be a minor challenge to someone with e.g. a MiniMac.) It's not yet been tested on non-x86 systems, without ACPI, or with HPET. And the RTC framework will surely have teething pains on "mainstream" PC-based systems (though must embedded Linux systems use it heavily), not limited to sorting out the "/dev/rtc0" issue (udev easily tweaked). Also, the ALSA rtctimer code doesn't use the new RTC API. Otherwise, this should be a no-known-regressions replacement for the old drivers/char/rtc.c driver, and should help the non-embedded distros (and the new timekeeping code) start to switch to the framework. Note also that any systems using "rtc-m48t86" are candidates to switch over to this more functional driver; the platform data is different, and the way bytes are read is different, but otherwise those chips should be compatible. [akpm@osdl.org: sparc32 fix] [akpm@osdl.org: sparc64 fix] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Woody Suwalski <woodys@xandros.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by:
-
Mathieu Desnoyers authored
Signed-off-by:
-
Kyle McMartin authored
I noticed that almost all architectures implemented exactly the same sys32_sysinfo... except parisc, where a bug was to be found in handling of the uptime. So let's remove a whole whack of code for fun and profit. Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it would be the best tested. This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but instead extracting out the common code from sys_sysinfo. Cc: Christoph Hellwig <hch@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Robert P. J. Day authored
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in source files, including: * make multi-line initial descriptions single line * denote some function names, constants and structs as such * change erroneous opening '/*' to '/**' in a few places * reword some text for clarity Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Robert P. J. Day authored
Explain a couple of the most common errors in kernel-doc usage. Signed-off-by:
-
Alan Cox authored
Mostly so people can see the work in progress. This enhances the encode function which isn't currently used in the base tree but is when using some of the testing tty patches. This resolves a problem with some hardware where applications got confusing information from the tty ioctls. Correct but confusing. In some situations asking for, say, 9600 baud actually gets you 9595 baud or similar near-miss values. With the old code this meant that a request for B9600 got a return of BOTHER, 9595 which programs interpreted as a failure. The new code now works on the following basis - If you ask for specific rate via BOTHER, you get a precise return - If you ask for a standard Bfoo rate and the result is close you get a Bfoo return - If you ask for a standard Bfoo rate and get something way off you get a BOTHER/rate return This seems to fix up the cases I've found where this broke compatibility. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Allow whitespace in pointer-to-function [accept "(* done)", not just "(*done)"]. Allow tabs (spaces are already allowed) between "#define" and a macro name. Signed-off-by:
-
Randy Dunlap authored
Alphabetize the sysrq command keys list. Signed-off-by:
-
Alexey Dobriyan authored
Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Corey Minyard <minyard@acm.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Randy Dunlap authored
In kernel-doc syntax, be a little flexible: allow whitespace between a function parameter name and the colon that must follow it, such as: @pdev : PCI device to unplug (This allows lots of megaraid kernel-doc to work without tons of editing.) Signed-off-by:
-
Robert P. J. Day authored
Delete the few remaining unnecessary calls to memset(0) after a call to kzalloc(). Signed-off-by:
-
Andrew Morton authored
fs/proc/proc_misc.c: In function 'proc_misc_init': fs/proc/proc_misc.c:764: warning: unused variable 'entry' Signed-off-by:
-
Andrew Morton authored
kernel/sysctl.c:2816: warning: 'sysctl_ipc_data' defined but not used Signed-off-by:
-
Adrian Bunk authored
Schedule obsolete OSS drivers (with ALSA drivers that support the same hardware) for removal. A rationale of the patch is in http://lkml.org/lkml/2006/12/18/305Signed-off-by:
Thomas Sailer <sailer@ife.ee.ethz.ch> Signed-off-by:
-
Rolf Eike Beer authored
The arguments are really const. Mark them const to allow these functions being called from places where the arguments are const without getting useless compiler warnings. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Olaf Hering authored
Correct the AIX magic check to let 'echo > /dev/sdb' actually work. Signed-off-by:
Olaf Hering <olh@suse.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anton Blanchard <anton@samba.org> Signed-off-by:
-
Olaf Hering authored
The patch to identify AIX disks and ignore them has caused at least one machine to fail to find the root partition on 2.6.19. The patch is: http://lkml.org/lkml/2006/7/31/117 The problem is some disk formatters do not blow away the first 4 bytes of the disk. If the disk we are installing to used to have AIX on it, then the first 4 bytes will still have IBMA in EBCDIC. The install in question was debian etch. Im not sure what the best fix is, perhaps the AIX detection code could check more than the first 4 bytes. The whole partition info for primary partitions is in this block: dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) All other data do not matter, beside the 0x55aa marker at the end of the first block. Signed-off-by:
-
Robert P. J. Day authored
Simplify the few instances where a call to "get_zeroed_page()" is closely followed by an unnecessary call to memset() to clear that page. Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Corey Minyard authored
Fix some RCU problem pointed out by Paul McKenney of IBM. These are: The wholesale move of the command receivers list into a new list was not safe because the list will point to the new tail during a traversal, so the traversal will never end on a reader if this happens during a read. Memory barriers were needed to handle proper ordering of the setting of the IPMI interface as valid. Readers might not see proper ordering of data otherwise. In ipmi_smi_watcher_register(), the use of the _rcu suffix on the list is unnecessary. This require the list_splice_init_rcu() patch previously posted. Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Corey Minyard authored
This patch is in support of the IPMI driver. I have tested this with the IPMI driver changes coming in the next patch. Add a list_splice_init_rcu() function to splice an RCU-protected list into another list. This takes the sync function as an argument, so one would do something like: INIT_LIST_HEAD(&list); list_splice_init_rcu(&source, &dest, synchronize_rcu); The idea being to keep the RCU API proliferation down to a dull roar. [akpm@osdl.org: build fix] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Tilman Schmidt authored
Rename the variable "sum" in the __range_ok macros to avoid name collisions causing lots of "symbol shadows an earlier one" warnings by sparse. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
-
Helge Deller authored
The 32bit and 64bit PARISC Linux kernels suffers from the problem, that the gettimeofday() call sometimes returns non-monotonic times. The easiest way to fix this, is to drop the PARISC-specific implementation and switch over to the generic TIME_INTERPOLATION framework. But in order to make it even compile on 32bit PARISC, the patch below which touches the generic Linux code, is mandatory. More information and the full patch with the parisc-specific changes is included in this thread: http://lists.parisc-linux.org/pipermail/parisc-linux/2006-December/031003.html As far as I could see, this patch does not change anything for the existing architectures which use this framework (IA64 and SPARC64), since "cycles_t" is defined there as unsigned 64bit-integer anyway (which then makes this patch a no-change for them). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <linux-arch@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Convert all calls to invalidate_inode_pages() into open-coded calls to invalidate_mapping_pages(). Leave the invalidate_inode_pages() wrapper in place for now, marked as deprecated. Signed-off-by:
-
Anton Altaparmakov authored
It makes no sense to me to export invalidate_inode_pages() and not invalidate_mapping_pages() and I actually need invalidate_mapping_pages() because of its range specification ability... akpm: also remove the export of invalidate_inode_pages() by making it an inlined wrapper. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Pavel Pisa authored
The malformed HTML was generated after switch to XSLTPROC from SGML tools. The reference title <refentrytitle><phrase id="API-struct-x">struct x</phrase></refentrytitle> is converted into two recursive <a> tags <a href="re02.html"><span><a id="API-struct-x"></a>struct x</span></a> There is more possible solutions for this problem. One can be found at http://darkk.livejournal.com/ The proposed solution is based on suggestion provided by Jiri Kosek. Signed-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by:
-
Pavel Pisa authored
Simple increase of section TOC level generation significantly enhances navigation experience through generated kernel API documentation. This change restores back state from SGML tools time. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Jiri Slaby authored
Alter the driver to use the pci probing. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
- change pci conf prototype and rename it to moxa_pci_probe - move some code to moxa_pci_probe - create moxa_pci_remove Signed-off-by:
-
Jiri Slaby authored
Remove temporary or once used variables, that can be defined locally to save some bytes. Signed-off-by:
-
Jiri Slaby authored
- rename moxaChannels to moxa_port - rename moxa_str to moxa_ports - move board global variables into moxa_board - move port global variables into moxa_port Signed-off-by:
-
Jiri Slaby authored
Nothing is used from this struct but *pdev. Remove it and store only pdev. Signed-off-by:
-
Jiri Slaby authored
Use del_timer_sync in most timer deletions, we don't want to oops in the timer function. Signed-off-by:
-
