- 23 Mar, 2015 7 commits
-
-
Tvrtko Ursulin authored
Need to do this in order to support 90/270 rotated display. v2: Pass in drm_plane instead of plane index to intel_obj_display_address. v3: * Renamed intel_obj_display_address to intel_plane_obj_offset. (Chris Wilson) * Simplified rotation check to bitwise AND. (Chris Wilson) v4: * Extracted 90/270 rotation check into a helper function. (Michel Thierry) v5: * Rebased for ggtt view changes. For: VIZ-4545 Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Tvrtko Ursulin authored
90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: -
Tvrtko Ursulin authored
For now only default implementation defaulting to normal view. v2: Some code review cleanups. (Joonas Lahtinen) Signed-off-by:
-
Tvrtko Ursulin authored
Plane state carries the rotation information which is needed for determining the appropriate GGTT view type. This just adds the parameter with the actual usage coming in future patches. Signed-off-by:
-
Tvrtko Ursulin authored
To support frame buffer rotation we need to be able to pass on the information on what kind of GGTT view is required for display. This patch just adds the parameter and makes all the callers default to the normal view. v2: Rebased for ggtt view changes. v3: Don't limit PIN_MAPPABLE to normal views just yet. (Joonas Lahtinen) Signed-off-by:
-
Tvrtko Ursulin authored
It will be used in a later patch and also convert all height parameters from int to unsigned int. v2: Rebased for fb modifiers. v3: Fixed v2 rebase. v4: * Height should be unsigned int. * Make it take pixel_format for consistency and simplicity. Signed-off-by:
-
Ville Syrjälä authored
msleep() can sleep for way too long, so switch wait_for() to use usleep_range() instead. Following a totally unscientific method I just picked the range as W-2W. This cuts the i915 init time on my BSW to almost half: - initcall i915_init+0x0/0xa8 [i915] returned 0 after 419977 usecs + initcall i915_init+0x0/0xa8 [i915] returned 0 after 238419 usecs Note that I didn't perform any other benchmarks on this so far. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 20 Mar, 2015 33 commits
-
-
Michel Thierry authored
While running kmemleak chasing a different memleak, I saw that the capture_error_state function was leaking some objects, for example: unreferenced object 0xffff8800a9b72148 (size 8192): comm "kworker/u16:0", pid 1499, jiffies 4295201243 (age 990.096s) hex dump (first 32 bytes): 00 00 04 00 00 00 00 00 5d f4 ff ff 00 00 00 00 ........]....... 00 30 b0 01 00 00 00 00 37 00 00 00 00 00 00 00 .0......7....... backtrace: [<ffffffff811e5ae4>] create_object+0x104/0x2c0 [<ffffffff8178f50a>] kmemleak_alloc+0x7a/0xc0 [<ffffffff811cde4b>] __kmalloc+0xeb/0x220 [<ffffffffa038f1d9>] kcalloc.constprop.12+0x2d/0x2f [i915] [<ffffffffa0316064>] i915_capture_error_state+0x3f4/0x1660 [i915] [<ffffffffa03207df>] i915_handle_error+0x7f/0x660 [i915] [<ffffffffa03210f7>] i915_hangcheck_elapsed+0x2e7/0x470 [i915] [<ffffffff8108d574>] process_one_work+0x144/0x490 [<ffffffff8108dfbd>] worker_thread+0x11d/0x530 [<ffffffff81094079>] kthread+0xc9/0xe0 [<ffffffff817a2398>] ret_from_fork+0x58/0x90 [<ffffffffffffffff>] 0xffffffffffffffff The following objects are allocated in i915_gem_capture_buffers, but not released in i915_error_state_free: - error->active_bo_count - error->pinned_bo - error->pinned_bo_count - error->active_bo[vm_count] (allocated in i915_gem_capture_vm). The leaks were introduced by commit 95f5301d Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Jul 31 17:00:15 2013 -0700 drm/i915: Update error capture for VMs v2: Reuse iterator and add culprit commit details (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Ville Syrjälä authored
Write the PLANE_SURF register instead of PLANE_CTL to arm the double buffer regisrter update. Signed-off-by:
-
Ville Syrjälä authored
Replace the RMW access with explicit initialization of the entire plane control register, as was done for primary planes in: commit f45651ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Aug 8 21:51:10 2014 +0300 drm/i915: Eliminate rmw from .update_primary_plane() The automagic primary plane disable is still doing RMWs, but that will require more work to untangle, so leave it alone for now. Signed-off-by:
-
Ville Syrjälä authored
Store the colorkey in intel_plane and kill off all the RMW stuff handling it. This is just an intermediate step and eventually the colorkey needs to be converted into some properties. v2: Actually update the hardware state in the set_colorkey ioctl (Daniel) Signed-off-by:
-
Matt Roper authored
Determining whether we'll need to wait for vblanks is something we should determine during the atomic 'check' phase, not the 'commit' phase. Note that we only set these bits in the branch of 'check' where intel_crtc->active is true so that we don't try to wait on a disabled CRTC. The whole 'wait for vblank after update' flag should go away in the future, once we start handling watermarks in a proper atomic manner. This regression has been introduced in commit 2fdd7def16dd7580f297827930126c16b152ec11 Author: Matt Roper <matthew.d.roper@intel.com> Date: Wed Mar 4 10:49:04 2015 -0800 drm/i915: Don't clobber plane state on internal disables Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Root-cause-analysis-by:Paulo Zanoni <paulo.r.zanoni@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89550 Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/legacy-planes-dpms Testcase: igt/pm_rpm/universal-planes Testcase: igt/pm_rpm/universal-planes-dpms Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Tested-by:
-
Imre Deak authored
Prepare chv_find_best_dpll to be used for BXT too, where we want to consider the error between target and calculated frequency too when choosing a better PLL configuration. No functional change. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Signed-off-by:
-
Imre Deak authored
Factor out the logic to decide whether the newly calculated dividers are better than the best found so far. Do this for clarity and to prepare for the upcoming BXT helper needing the same. No functional change. Signed-off-by:
-
Ville Syrjälä authored
intel_plane->obj is not used anymore so kill it. Also don't pass both the fb and obj to the sprite .update_plane() hook, as just passing the fb is enough. Signed-off-by:
-
Ben Widawsky authored
The problem is we're going to switch to a new context, which could be the default context. The plan was to use restore inhibit, which would be fine, except if we are using dynamic page tables (which we will). If we use dynamic page tables and we don't load new page tables, the previous page tables might go away, and future operations will fault. CTXA runs. switch to default, restore inhibit CTXA dies and has its address space taken away. Run CTXB, tries to save using the context A's address space - this fails. The general solution is to make sure every context has it's own state, and its own address space. For cases when we must restore inhibit, first thing we do is load a valid address space. I thought this would be enough, but apparently there are references within the context itself which will refer to the old address space - therefore, we also must reinitialize. v2: to->ppgtt is only valid in full ppgtt. v3: Rebased. v4: Make post PDP update clearer. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Ben Widawsky authored
This patch was formerly known as, "Force pd restore when PDEs change, gen6-7." I had to change the name because it is needed for GEN8 too. The real issue this is trying to solve is when a new object is mapped into the current address space. The GPU does not snoop the new mapping so we must do the gen specific action to reload the page tables. GEN8 and GEN7 do differ in the way they load page tables for the RCS. GEN8 does so with the context restore, while GEN7 requires the proper load commands in the command streamer. Non-render is similar for both. Caveat for GEN7 The docs say you cannot change the PDEs of a currently running context. We never map new PDEs of a running context, and expect them to be present - so I think this is okay. (We can unmap, but this should also be okay since we only unmap unreferenced objects that the GPU shouldn't be tryingto va->pa xlate.) The MI_SET_CONTEXT command does have a flag to signal that even if the context is the same, force a reload. It's unclear exactly what this does, but I have a hunch it's the right thing to do. The logic assumes that we always emit a context switch after mapping new PDEs, and before we submit a batch. This is the case today, and has been the case since the inception of hardware contexts. A note in the comment let's the user know. It's not just for gen8. If the current context has mappings change, we need a context reload to switch v2: Rebased after ppgtt clean up patches. Split the warning for aliasing and true ppgtt options. And do not break aliasing ppgtt, where to->ppgtt is always null. v3: Invalidate PPGTT TLBs inside alloc_va_range. v4: Rename ppgtt_invalidate_tlbs to mark_tlbs_dirty and move pd_dirty_rings from i915_address_space to i915_hw_ppgtt. Fixes when neither ctx->ppgtt and aliasing_ppgtt exist. v5: Removed references to teardown_va_range. v6: Updated needs_pd_load_pre/post. v7: Fix pd_dirty_rings check in needs_pd_load_post, and update/move comment about updated PDEs to object_pin/bind (Mika). Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Ben Widawsky authored
Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Ben Widawsky authored
In Gen8, PDPs are saved and restored with legacy contexts (legacy contexts only exist on the render ring). So change the ordering of LRI vs MI_SET_CONTEXT for the initialization of the context. Also the only cases in which we need to manually update the PDPs are when MI_RESTORE_INHIBIT has been set in MI_SET_CONTEXT (i.e. when the context is not yet initialized or it is the default context). Legacy submission is not available post GEN8, so it isn't necessary to add extra checks for newer generations. v2: Use new functions to replace the logic right away (Daniel) v3: Add missing pd load logic. v4: Add warning in case pd_load_pre & pd_load_post are true, and add missing trace_switch_mm. Cleaned up pd_load conditions. Add more information about when is pd_load_post needed. (Mika) Signed-off-by:
-
Michel Thierry authored
No functional changes, but will improve code clarity and removed some duplicated defines. Signed-off-by:
-
Ville Syrjälä authored
AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Daniel Vetter authored
And remove one bogus * from i915_gem_gtt.c since that's not a kerneldoc there. v2: Review from Chris: - Clarify memory space to better distinguish from address space. - Add note that shrink doesn't guarantee the freed memory and that users must fall back to shrink_all. - Explain how pinning ties in with eviction/shrinker. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Daniel Vetter authored
Two code changes: - Extract i915_gem_shrinker_init. - Inline i915_gem_object_is_purgeable since we open-code it everywhere else too. This already has the benefit of pulling all the shrinker code together, next patch adds a bit of kerneldoc. Signed-off-by:
-
Chris Wilson authored
Use both up/down manual ei calcuations for symmetry and greater flexibility for reclocking, instead of faking the down interrupt based on a fixed integer number of up interrupts. Signed-off-by:
-
Chris Wilson authored
Rewrite commit 31685c25 Author: Deepak S <deepak.s@linux.intel.com> Date: Thu Jul 3 17:33:01 2014 -0400 drm/i915/vlv: WA for Turbo and RC6 to work together. Other than code clarity, the major improvement is to disable the extra interrupts generated when idle. However, the reclocking remains rather slow under the new manual regime, in particular it fails to downclock as quickly as desired. The second major improvement is that for certain workloads, like games, we need to combine render+media activity counters as the work of displaying the frame is split across the engines and both need to be taken into account when deciding the global GPU frequency as memory cycles are shared. Signed-off-by:
-
Chris Wilson authored
When we idle, we set the GPU frequency to the hardware minimum (not user minimum). We introduce a new variable to distinguish between the different roles, and to allow easy tuning of the idle frequency without impacting over aspects of RPS. Setting the minimum frequency should be a safety blanket as the pcu on the GPU should be power gating itself anyway. However, in order for us to do set the absolute minimum frequency, we need to relax a few of our assertions that we do not exceed the user limits. v2: Add idle_freq v3: Init idle_freq for vlv and add a bunch of WARNs Signed-off-by:
-
Chris Wilson authored
If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392Signed-off-by:
-
Tvrtko Ursulin authored
This makes the interface consistent to old i915_gem_obj_ggtt_pin. Signed-off-by:
-
Dan Carpenter authored
In the original code then if WARN_ON(i915_is_ggtt(vm) != !!ggtt_view) was true then we leak "vma". Presumably that doesn't happen often but static checkers complain and this bug is easy to fix. Fixes: c3bbb6f2825d ('drm/i915: Do not use ggtt_view with (aliasing) PPGTT') Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jani Nikula authored
Allow for a larger receive data size, and check if the receiver returned the number of bytes written. Without this, we've basically skipped all the unwritten bytes for short writes. Signed-off-by:
-
Ville Syrjälä authored
To keep things clear rename the intel_dp->supported_rates[] to intel_dp->sink_rates[], and rename the supported_rates[] name we used elsewhere for the intersection of source and sink rates to common_rates[]. Cc: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Signed-off-by:
-
Ville Syrjälä authored
TODO: Is there an actually nice way to print an array of ints? Signed-off-by:
-
Ville Syrjälä authored
"P1273_DPLL_Programming Spreadsheet.xlsm" lists a boatload of frequencies for eDP. Try to use them all. For now I've decided not to add hardcoded DPLL dividers for these cases since chv_find_best_dpll() works just fine. I've not actually tested any of these since I don't have an eDP 1.4 panel. Signed-off-by:
-
Ville Syrjälä authored
Complain loudly if we ever attempt to overflow the the supported_rates[] array. This should never happen since the sink_rates[] array will always be smaller or of equal size. But should someone change that we want to catch it without scribblign over the stack. Signed-off-by:
-
Ville Syrjälä authored
Now that intel_dp_max_link_bw() no longer considers the source restrictions we may try to enable MST with 5.4GHz even when the source doesn't support it. To fix that switch the code over to handle the link rate in the same way as the SST code handles it. Signed-off-by:
-
Ville Syrjälä authored
Drop the gen9 checks from the code and issue DP_LINK_RATE_SET whenever the sink reports to support it. Signed-off-by:
-
Ville Syrjälä authored
Consider the link rates reported by the sink via DP_SUPPORTED_LINK_RATES when checking modes against the max link rate. Signed-off-by:
-
Ville Syrjälä authored
intel_dp_compute_config() only really needs to know the rates supported by both source and sink, so hide the raw source and sink arrays from it. Signed-off-by:
-
Ville Syrjälä authored
Remove the sink vs. source limit mess from intel_dp_max_link_bw() and just move the source restriction checks to intel_dp_source_rates(). Signed-off-by:
-
