- 27 Nov, 2008 5 commits
-
-
Takashi Iwai authored
Split the monolithc HD-audio driver into several pieces: - snd-hda-intel HD-audio PCI controller driver; loaded via udev - snd-hda-codec HD-audio codec bus driver - snd-hda-codec-* Specific HD-audio codec drivers When built as modules, snd-hda-codec (that is invoked by snd-hda-intel) looks up the codec vendor ID and loads the corresponding codec module automatically via request_module(). When built in a kernel, each codec drivers are statically hooked up before probing the PCI. This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module information for each driver, and driver-linking codes between codec-bus and codec drivers. TODO: - Avoid EXPORT_SYMBOL*() when built-in kernel - Restore __devinit appropriately depending on the condition Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Fixed a wrong boundary check of num_adc_nids in set_capture_mixer() in patch_realtek.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The reconfiguration of PCM affected all PCM streams on the bus, but this this should be done rather only for the target codec. This patch does the following: - introduce bitmap indicating the PCM device usages on a hda_bus - refactor the PCM build functions - fix __devinit prefix in some fucntions - add a proper ifdef around HDA-reconfig-specific functions Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Move power_save option into hda_intel.c, and make a field in hda_bus, instead of keeping module parameters in separate files. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Minor clean ups: move snd_hda_codecs_inuse() into hda_intel.c and make static. Also, make snd_hda_query_supported_pcm() static as it's used only in hda_codec.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Nov, 2008 1 commit
-
-
Qinghuang Feng authored
There is no argument named @state in snd_hda_resume, remove its' comment. Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 25 Nov, 2008 11 commits
-
-
Takashi Iwai authored
The fix in 82894b6f resulted in zero due to wrong mask and bit shifts. Now fixed really. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_sigmatel.c
-
Takashi Iwai authored
Check the model type instead of PCI SSID for detection of the mic types on Dell laptops with IDT 92HD73xx codecs. In this way, a new laptop can be tested via model module option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Fixed the quirk string for Dell studio 1535 (the product name wasn't published at the time the patch was made). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
STAC/IDT driver creates "Headphone as Line-Out" switch even if there is no line-out pins on the machine. For devices only with headpohnes and speaker-outs, this switch shouldn't be created. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added preset model=targa-dig for MSI 7260 mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Since we need to handle many unsolicited events assigned to different widgets, allocate the event dynamically using the existing events array, and use the tag appropriately instead of combination of fixed number and widget nid. (Note that widget nid can be over 4 bits!) Also, replaced the call of unsol_event handler with a dedicated function to be more readable. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_sigmatel.c
-
Takashi Iwai authored
The AFG pin power-mapping isn't properly set for the fixed I/O pins on IDT 92HD* codecs. This resulted in the low power mode after the boot until any jack detection is executed, thus no output from the speaker. This patch fixes the power mapping for the fixed pins, and also fixes the GPIO bits and digital I/O pin settings properly in stac92xx_ini(). Reference: Novell bnc#446025 https://bugzilla.novell.com/show_bug.cgi?id=446025Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Show only the relevant bits in the PCM rate bits as in the earlier version. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
SPDIF status bits controls are written via snd_hda_codec_write() without caching. This causes a regression at resume that the bits are lost. Simply replacing it with the cached version fixes the problem. Reference: http://lkml.org/lkml/2008/11/24/324Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Nov, 2008 3 commits
-
-
Takashi Iwai authored
Medion MD96630 has ALC268 codec on slot#2 although it's not used for any purpose. This codec conflicts with the primiary codec ALC888 on slot#0, and gives mixer errors. This patch adds a corresponding entry to probe_mask blacklist. Reference: Novell bnc#412528 https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vincent Petry authored
This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling. It is made against the 2008-11-23 snapshot. Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530 laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF (this one is on the laptop side, the other ones are on the rear). Model detection works. Headphone jack sense works now. Front mic works now, was same as Acer Aspire 4930G. Added channel mode from 2 to 8 channels. In 2ch and 4ch modes, the front is also sent to the Line-out/side jack for convenience instead of just muting the Line-out/side jack like other models do. When using the Mic-in jack as CLFE, the sound is very low (bug?). To work it around, in 6ch mode the CLFE channel is duplicated to the Line-out/side jack because this one has a better amp. Cc: manu@frogged.de Signed-off-by: Vincent Petry <PVince81@yahoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
STAC/IDT driver creates "Headphone as Line-Out" switch even if there is no line-out pins on the machine. For devices only with headpohnes and speaker-outs, this switch shouldn't be created. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Nov, 2008 7 commits
-
-
Wu Fengguang authored
Fix "defined but not used" build warning by moving eld_versoin_names[] and cea_edid_version_names[] into hdmi_print_eld_info(). Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
DisplayPort is a digital display interface standard put forth by the Video Electronics Standards Association (VESA). It defines a new license-free, royalty-free, digital audio/video interconnect, intended to be used primarily between a computer and its display monitor, or a computer and a home-theater system. - From Wikipedia, the free encyclopedia Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Describe what ELD proc interface provides and how to fix incorrect values. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
- rename ELD proc write routine to hdmi_write_eld_info() - support modifying WMAPro's profile Write to some ELD fields (monitor_name, manufacture_id, product_id, eld_version, edid_version) are deliberately not supported, since that won't correct wrong behaviors and only leads to confusions. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
- make some messages more user friendly - add message prefix "HDMI:" to indicate the problem's domain (also easier to do `dmesg | grep HDMI` ;-) Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Print some CA selecting info, which could be valuable for debugging when something goes wrong. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Some minor code cleanups. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 21 Nov, 2008 13 commits
-
-
Takashi Iwai authored
snd_print_pcm_rates() and snd_print_pcm_bits() are used by both hda_proc.c and hda_eld.c, thus they have to be defined in the common place. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
Fixed the quirk string for Dell studio 1535 (the product name wasn't published at the time the patch was made). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hannes Eder authored
Fix the following sparse warning: sound/pci/hda/patch_nvhdmi.c:161:25: warning: symbol 'snd_hda_preset_nvhdmi' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Make the codec re-configuration feature selectable via Kconfig, CONFIG_SND_HDA_RECONFIG. Also mark it as experimental (as it really is). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Release ELD proc file when reconfigured so that no leak occurs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The jack instances created in patch_sigmatel.c may be double-freed. The device management code checks the invalid element, and thus there is no real breakage, but it spews annoying warning messages. But, we can't simply remove the release calls of these jack instances because they have to be freed when the codec is re-configured. Now, a new flag, bus->shutdown is introduced to indicate that the bus is really being unloaded, i.e. the objects managed by the device manager will be automatically deleted. We release these objects only when this flag isn't set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added the matching model=dell-m6 for Dell Studio 15 laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Allow users to fix quicks of ELD ROMs by writing new values to the ELD proc interface. The format is one or more lines of "name hex_value". Users can add/remove/modify up to 32 SAD(Short Audio Descriptor) entries. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Rename "monitor name" to "monitor_name" to conform with the keyword style. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Fix bugs on printing the ELD sample bits. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-