- 19 Mar, 2018 9 commits
-
-
Paweł Jabłoński authored
This fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE in the PF Reset path when Global Reset is in progress. While the driver is polling for the end of the PF Reset and the Global Reset is triggered, abandon the PF Reset path and prepare for the upcoming Global Reset. Signed-off-by:
Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
These flags were defined, but there is no use within the driver code, so we don't need to keep them. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Patryk Małek authored
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by:
Patryk Małek <patryk.malek@intel.com> Tested-by:
-
Doug Dziggel authored
Fix return types from i40e_status to enum i40e_status_code. Signed-off-by:
Doug Dziggel <douglas.a.dziggel@intel.com> Tested-by:
-
Jacob Keller authored
A recent patch updated the signature for i40e_aq_set_switch_config() to add a new parameter 'mode'. It forgot to document the parameter in the doxygen function header comment. Add the parameter to the function description now. Signed-off-by:
-
Shiraz Saleem authored
During suspend client MSIx vectors are freed while they are still in use causing a crash on entering S3. Fix this calling client close before freeing up its MSIx vectors. Also update the client MSIx vectors on resume before client open is called. Fixes commit b980c063 ("i40e: shutdown all IRQs and disable MSI-X when suspended") Reported-by:
Stefan Assmann <sassmann@redhat.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Tested-by:
-
Patryk Małek authored
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by:
-
Jan Sokolowski authored
The i40e_set_link_ksettings and i40e_get_link_ksettings use different codepaths to check available and supported advertisement modes. This creates scenarios where it's possible to set a mode that's not allowed, resulting in a link down. Fix setting advertisement in i40e_set_link_ksettings by calling i40e_get_link_ksettings to check what modes are allowed. Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Tested-by:
-
Alexander Duyck authored
While doing some code review I noticed that we can get into a state where we exit with the "IN_CRITICAL_TASK" bit set while notifying the PF of flower filters. This patch is meant to address that plus tweak the ordering of the while loop waiting on it slightly so that we don't wait an extra period after we have failed for the last time. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
- 18 Mar, 2018 31 commits
-
-
Stefano Brivio authored
Reported-by:
David Ahern <dsahern@gmail.com> Fixes: 1fad59ea ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== Automatic PHY interrupts Now that the mv88e6xxx driver either installs in interrupt handler, or polls for interrupts, it is possible to always handle PHY interrupts, rather than have phylib perform the polling. This speeds up detection of link changes and reduces the load on the MDIO bus, which is beneficial for PTP. ==================== Signed-off-by: -
Andrew Lunn authored
When registering an MDIO bus, it is possible to pass an array of interrupts, one per address on the bus. phylib will then associate the interrupt to the PHY device, if no other interrupt is provided. Some of the global2 interrupts are PHY interrupts. Place them into the MDIO bus structure. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Add to the info structure the number of internal PHYs, if they generate interrupts. Some of the older generations of switches have internal PHYs, but no interrupt registers. In this case, set the count to zero. Signed-off-by:
-
Andrew Lunn authored
With the recent change to polling for interrupts, it is important that the number of global 1 interrupts is listed. Without it, the driver requests an interrupt domain for zero interrupts, which returns EINVAL, and the probe fails. Add two missing entries. Signed-off-by:
-
Florian Fainelli authored
We can hit the register lock not held assertion with the following path: [ 34.170631] mv88e6085 0.1:00: Switch registers lock not held! [ 34.176510] CPU: 0 PID: 950 Comm: ethtool Not tainted 4.16.0-rc4 #143 [ 34.182985] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 34.189519] Backtrace: [ 34.192033] [<8010c4b4>] (dump_backtrace) from [<8010c788>] (show_stack+0x20/0x24) [ 34.199680] r6:9f5dc010 r5:00000011 r4:9f5dc010 r3:00000000 [ 34.205434] [<8010c768>] (show_stack) from [<80679d38>] (dump_stack+0x24/0x28) [ 34.212719] [<80679d14>] (dump_stack) from [<804844a8>] (mv88e6xxx_read+0x70/0x7c) [ 34.220376] [<80484438>] (mv88e6xxx_read) from [<804870dc>] (mv88e6xxx_port_get_cmode+0x34/0x4c) [ 34.229257] r5:a09cd128 r4:9ee31d07 [ 34.232880] [<804870a8>] (mv88e6xxx_port_get_cmode) from [<80487e6c>] (mv88e6352_port_has_serdes+0x24/0x64) [ 34.242690] r4:9f5dc010 [ 34.245309] [<80487e48>] (mv88e6352_port_has_serdes) from [<804880b8>] (mv88e6352_serdes_get_stats+0x28/0x12c) [ 34.255389] r4:00000001 [ 34.257973] [<80488090>] (mv88e6352_serdes_get_stats) from [<804811e8>] (mv88e6xxx_get_ethtool_stats+0xb0/0xc0) [ 34.268156] r10:00000000 r9:00000000 r8:00000000 r7:a09cd020 r6:00000001 r5:9f5dc01c [ 34.276052] r4:9f5dc010 [ 34.278631] [<80481138>] (mv88e6xxx_get_ethtool_stats) from [<8064f740>] (dsa_slave_get_ethtool_stats+0xbc/0xc4) mv88e6xxx_get_ethtool_stats() calls mv88e6xxx_get_stats() which calls both chip->info->ops->stats_get_stats(), which holds the register lock, and chip->info->ops->serdes_get_stats() which does not. Have chip->info->ops->serdes_get_stats() be running with the register lock held to avoid such assertions. Fixes: 436fe17d ("net: dsa: mv88e6xxx: Allow the SERDES interfaces to have statistics") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Andrew Lunn authored
Handle polled interrupts correctly when loading the module. Signed-off-by:
-
David S. Miller authored
Stefano Brivio says: ==================== selftests: pmtu: Add further vti/vti6 MTU and PMTU tests Patches 5/10 to 10/10 add tests to verify default MTU assignment for vti4 and vti6 interfaces, to check that MTU values set on new link and link changes are properly taken and validated, and to verify PMTU exceptions on vti4 interfaces. Patch 1/10 reverses function return codes as suggested by David Ahern. Patch 2/10 fixes the helper to fetch exceptions MTU to run in the passed namespace. Patches 3/10 and 4/10 are preparation work to make it easier to introduce those tests. v2: Reverse return codes, and make output prettier in 4/9 by using padded printf, test descriptions and buffered error strings. Remove accidental output to /dev/kmsg from 10/10 (was 9/9). ==================== Signed-off-by: -
Stefano Brivio authored
This test checks that MTU configured from userspace is used on link creation and changes, and that when it's not passed from userspace, it's calculated properly from the MTU of the lower layer. Signed-off-by:
-
Stefano Brivio authored
Same as pmtu_vti4_link_add_mtu test, but for IPv6. Signed-off-by:
-
Stefano Brivio authored
This test checks that MTU given on vti link creation is actually configured, and that tunnel is not created with an invalid MTU value. Signed-off-by:
-
Stefano Brivio authored
This test checks that PMTU exceptions are created only when needed on IPv4 routes with vti and xfrm, and their PMTU value is checked as well. We can't adopt the same approach as test_pmtu_vti6_exception() here, because on IPv4 administrative MTU changes won't be reflected directly on PMTU. Signed-off-by:
-
Stefano Brivio authored
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6. Signed-off-by:
-
Stefano Brivio authored
This test checks that the MTU assigned by default to a vti (IPv4) interface created on top of veth is simply veth's MTU minus the length of the encapsulated IPv4 header. Signed-off-by:
-
Stefano Brivio authored
Introduce list of tests and their descriptions, and loop on it in main body. Tests will now just take care of calling setup with a list of "units" they need, and return 0 on success, 1 on failure, 2 if the test had to be skipped. Main script body will take care of displaying results and cleaning up after every test. Introduce guard variable so that we don't clean up twice in case of interrupts or unexpected failures. The pmtu_vti6_exception test can now run its third step even if the previous one failed, as we can return values from it. Also introduce support to display test descriptions, and display aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that in case of failure we can display them right under the outcome for each test. Signed-off-by:
-
Stefano Brivio authored
...so that it can be used for any iproute command output. Signed-off-by:
-
Stefano Brivio authored
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I accidentally assumed route_get_* helpers would run from a single namespace. Make them a bit more generic, by passing the namespace command prefix as a parameter instead. Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test") Signed-off-by: -
Stefano Brivio authored
David suggests it's more intuitive to return non-zero on failures, and zero on success. No need to introduce tail 'return 0' in functions, they will return the exit code of the last command anyway. Suggested-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Update TX pool and TX routines This patch restructures the TX pool data structure and provides a separate TX pool array for TSO transmissions. This is already used in some way due to our unique DMA situation, namely that we cannot use single DMA mappings for packet data. Previously, both buffer arrays used the same pool entry. This restructuring allows for some additional cleanup in the driver code, especially in some places in the device transmit routine. In addition, it allows us to more easily track the consumer and producer indexes of a particular pool. This has been further improved by better tracking of in-use buffers to prevent possible data corruption in case an invalid buffer entry is used. v5: Fix bisectability mistake in the first patch. Removed TSO-specific data in a later patch when it is no longer used. v4: Fix error in 7th patch that causes an oops by using the older fixed value for number of buffers instead of the respective field in the tx pool data structure v3: Forgot to update TX pool cleaning function to handle new data structures. Included 7th patch for that. v2: Fix typo in 3/6 commit subject line ==================== Signed-off-by: -
Thomas Falcon authored
Finally, remove the TSO-specific fields in the TX pool strcutures. These are no longer needed with the introduction of separate buffer pools for TSO transmissions. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
Update routine that cleans up any outstanding transmits that have not received completions when the device needs to close. Introduces a helper function that cleans one TX pool to make code more readable. Signed-off-by:
-
Thomas Falcon authored
Improve TX pool buffer accounting to prevent the producer index from overruning the consumer. First, set the next free index to an invalid value if it is in use. If next buffer to be consumed is in use, drop the packet. Finally, if the transmit fails for some other reason, roll back the consumer index and set the free map entry to its original value. This should also be done if the DMA map fails. Signed-off-by:
-
Thomas Falcon authored
Update TX and TX completion routines to account for TX pool restructuring. TX routine first chooses the pool depending on whether a packet is GSO or not, then uses it accordingly. For the completion routine to know which pool it needs to use, set the most significant bit of the correlator index to one if the packet uses the TSO pool. On completion, unset the bit and use the correlator index to release the buffer pool entry. Signed-off-by:
-
Thomas Falcon authored
Introduce function that initializes one TX pool. Use that to create each pool entry in both the standard TX pool and TSO pool arrays. Signed-off-by:
-
Thomas Falcon authored
Introduce function that frees one TX pool. Use that to release each pool in both the standard TX pool and TSO pool arrays. Signed-off-by:
-
Thomas Falcon authored
Update TX pool reset routine to accommodate new TSO pool array. Introduce a function that resets one TX pool, and use that function to initialize each pool in both pool arrays. Signed-off-by:
-
Thomas Falcon authored
Remove some unused fields in the structure and include values describing the individual buffer size and number of buffers in a TX pool. This allows us to use these fields for TX pool buffer accounting as opposed to using hard coded values. Include a new pool array for TSO transmissions. Signed-off-by:
-
Al Viro authored
use proc_remove_subtree() for subtree removal, both on setup failure halfway through and on teardown. No need to make simple things complex... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== hv_netvsc: minor enhancements A couple of small things for net-next ==================== Signed-off-by: -
Stephen Hemminger authored
This adds tracepoints to the driver which has proved useful in debugging startup and shutdown race conditions. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
The caller has a valid pointer, pass it to rndis_filter_halt_device and avoid any possible RCU races here. Signed-off-by:
-
