- 12 Jul, 2017 12 commits
-
-
Andreas Gruenbacher authored
commit 961ae1d8 upstream. Before commit 88ffbf3e "GFS2: Use resizable hash table for glocks", glocks were freed via call_rcu to allow reading the glock hashtable locklessly using rcu. This was then changed to free glocks immediately, which made reading the glock hashtable unsafe. Bring back the original code for freeing glocks via call_rcu. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiahau Chang authored
commit dec08194 upstream. For AMD Promontory xHCI host, although you can disable USB 2.0 ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. This will disable wake on connect, disconnect and overcurrent on AMD Promontory USB2 ports [checkpatch cleanup and commit message reword -Mathias] Cc: Tsai Nicholas <nicholas.tsai@amd.com> Signed-off-by: Jiahau Chang <Lars_Chang@asmedia.com.tw> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
commit 996fab55 upstream. A new Sierra Wireless EM7305 device ID used in a Toshiba laptop. Reported-by: Petr Kloc <petr_kloc@yahoo.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 8fb060da upstream. Add two Longcheer device-id entries which specifically enables a Telewell TW-3G HSPA+ branded modem (0x9801). Reported-by: Teemu Likonen <tlikonen@iki.fi> Reported-by: Bjørn Mork <bjorn@mork.no> Reported-by: Lars Melin <larsm17@gmail.com> Tested-by: Teemu Likonen <tlikonen@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit e271b2c9 upstream. Make sure to release any OF device-node reference taken when creating the USB device. Note that we currently do not hold a reference to the root hub device-tree node (i.e. the parent controller node). Fixes: 69bec725 ("USB: core: let USB device know device node") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Herrenschmidt authored
commit 7cf916bd upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Devin Heitmueller authored
commit 6836796d upstream. The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Grzeschik authored
commit b3b51417 upstream. The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremie Rapin authored
commit fd90f73a upstream. Added the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: Jeremie Rapin <rapinj@gmail.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
commit 04fb365c upstream. %p will leak kernel pointers, so let's not expose the information on dmesg and instead use %pK. %pK will only show the actual addresses if explicitly enabled under /proc/sys/kernel/kptr_restrict. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Pismenny authored
commit 5ecce4c9 upstream. The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive the port number from user input as part of its attributes and assumes it is valid. Down on the stack, that parameter is used to access kernel data structures. If the value is invalid, the kernel accesses memory it should not. To prevent this, verify the port number before using it. BUG: KASAN: use-after-free in ib_uverbs_create_ah+0x6d5/0x7b0 Read of size 4 at addr ffff880018d67ab8 by task syz-executor/313 BUG: KASAN: slab-out-of-bounds in modify_qp.isra.4+0x19d0/0x1ef0 Read of size 4 at addr ffff88006c40ec58 by task syz-executor/819 Fixes: 67cdb40c ("[IB] uverbs: Implement more commands") Fixes: 189aba99 ("IB/uverbs: Extend modify_qp and support packet pacing") Cc: Yevgeny Kliteynik <kliteyn@mellanox.com> Cc: Tziporet Koren <tziporet@mellanox.com> Cc: Alex Polak <alexpo@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Salido authored
commit 62655397 upstream. The driver_override implementation is susceptible to race condition when different threads are reading vs storing a different driver override. Add locking to avoid race condition. Fixes: 3d713e0e ("driver core: platform: add device binding path 'driver_override'") Cc: stable@vger.kernel.org Signed-off-by: Adrian Salido <salidoa@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 Jul, 2017 4 commits
-
-
Linus Torvalds authored
-
Sylvain 'ythier' Hitier authored
Signed-off-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Here's a final round of fixes for 4.12: - Fix misordered instructions in assembly code making kenel startup via UHB unreliable. - Fix special case of MADDF and MADDF emulation. - Fix alignment issue in address calculation in pm-cps on 64 bit. - Fix IRQ tracing & lockdep when rescheduling - Systems with MAARs require post-DMA cache flushes. The reordering fix and the MADDF/MSUBF fix have sat in linux-next for a number of days. The others haven't propagated from my pull tree to linux-next yet but all have survived manual testing and Imagination's automated test system and there are no pending bug reports" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Avoid accidental raw backtrace MIPS: Perform post-DMA cache flushes on systems with MAARs MIPS: Fix IRQ tracing & lockdep when rescheduling MIPS: pm-cps: Drop manual cache-line alignment of ready_count MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately MIPS: head: Reorder instructions missing a delay slot
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "One final fix for 4.12 - Doug found a boot failure case triggered by requesting a non-even MB vmalloc size" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8685/1: ensure memblock-limit is pmd-aligned
-
- 01 Jul, 2017 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Fixlets for x86: - Prevent kexec crash when KASLR is enabled, which was caused by an address calculation bug - Restore the freeing of PUDs on memory hot remove - Correct a negated pointer check in the intel uncore performance monitoring driver - Plug a memory leak in an error exit path in the RDT code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix memory leak on mount failure x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization perf/x86/intel/uncore: Fix wrong box pointer check x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "The last fix for perf for this cycles: - Prevent a segfault when kernel.kptr_restrict=2 is set by avoiding a null pointer dereference" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf machine: Fix segfault for kernel.kptr_restrict=2
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fix from Linus Walleij: "Brian noticed that this regression has not got a proper fix for the entire merge window and consequently we need to revert the offending commit. It's part of the RT-mainstream work, the dance goes like this, two steps forward, one step back. Summary: - A last fix for v4.12, an IRQ problem reported early in the merge window appears not to have been properly fixed, so the offending commit will be reverted and we will find the proper fix for v4.13. Hopefully" * tag 'pinctrl-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip"
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull last minute fixes for GPIO from Linus Walleij: - Fix another ACPI problem with broken BIOSes. - Filter out the right GPIO events, making a very user-visible bug go away. * tag 'gpio-v4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: acpi: Skip _AEI entries without a handler rather then aborting the scan gpiolib: fix filtering out unwanted events
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull last-minute tracing fixes from Steven Rostedt: "Two fixes: One is for a crash when using the :mod: trace probe command into stack_trace_filter. This bug was introduced during the last merge window. The other was there forever. It's a small bug that makes it impossible to name a module function for kprobes when the module starts with a digit" * tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Allow to create probe with a module name starting with a digit ftrace: Fix regression with module command in stack_trace_filter
-
- 30 Jun, 2017 14 commits
-
-
Zack Weinberg authored
uapi/linux/a.out.h uses a number of predefined macros that are deprecated because they're in the application namespace (e.g. '#ifdef linux' instead of '#ifdef __linux__'). This patch either corrects or just removes them if they are not applicable to Linux. The primary reason this is worth bothering to fix, considering how obsolete a.out binary support is, is that the GCC build process considers this such a severe error that it will copy the header into a private directory and change the macro names, which causes future updates to the header to be masked. This header probably doesn't get updated very often anymore, but it is the _only_ uapi header that gets this treatment, so IMHO it is worth patching just to drive that number all the way to zero. Signed-off-by: Zack Weinberg <zackw@panix.com> [hch: removed dead conditionals] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jakub Kicinski authored
"in a rcu enabled hashtable" is repeated twice in a comment. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vikas Shivappa authored
If mount fails, the kn_info directory is not freed causing memory leak. Add the missing error handling path. Fixes: 4e978d06 ("x86/intel_rdt: Add "info" files to resctrl file system") Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: vikas.shivappa@intel.com Cc: andi.kleen@intel.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1498503368-20173-3-git-send-email-vikas.shivappa@linux.intel.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Hopefully the last two powerpc fixes for 4.12. The CXL one is larger than I'd usually send at rc7, but it fixes new code this cycle, so better to have it working for the release. It was actually sent a few weeks back but got blocked in testing behind another fix that was causing issues. We are still tracking one crash in v4.12-rc7, but only one person has reproduced it and the commit identified by bisect doesn't touch any of the relevant code, so I think it's 50/50 whether that commit is actually the problem or it's some code layout / toolchain issue. Two fixes for code we merged this cycle: - cxl: Fixes for Coherent Accelerator Interface Architecture 2.0 - Avoid miscompilation w/GCC 4.6.3 on 32-bit - don't inline copy_to/from_user() Thanks to Al Viro, Larry Finger, Christophe Lombard" * tag 'powerpc-4.12-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Avoid miscompilation w/GCC 4.6.3 - don't inline copy_to/from_user() cxl: Fixes for Coherent Accelerator Interface Architecture 2.0
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: "Two fixes: - A fix for AMD IOMMU interrupt remapping code when IRQs are forwarded directly to KVM guests - Fixed check in the recently merged code to allow tboot with Intel VT-d disabled" * tag 'iommu-fixes-v4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix interrupt remapping when disable guest_mode iommu/vt-d: Correctly disable Intel IOMMU force on
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Two last-minute HD-audio fixes" * tag 'sound-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix endless loop of codec configure ALSA: hda - set input_path bitmap to zero after moving it to new place
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fixes from Miklos Szeredi: "Fix two bugs in copy-up code. One introduced in 4.11 and one in 4.12-rc" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: don't set origin on broken lower hardlink ovl: copy-up: don't unlock between lookup and link
-
Baoquan He authored
Kernel text KASLR is separated into physical address and virtual address randomization. And for virtual address randomization, we only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE. So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR, but not the original kernel loading address 'output'. The bug will cause kernel boot failure if kernel is loaded at a different position than the address, 16M, which is decided at compiled time. Kexec/kdump is such practical case. To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial value. Tested-by: Dave Young <dyoung@redhat.com> Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8391c73c ("x86/KASLR: Randomize virtual address separately") Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Baoquan He authored
For kernel text KASLR, the virtual address is confined to area of 1G, [0xffffffff80000000, 0xffffffffc0000000). For the implemenataion of virtual address randomization, we only randomize to get an offset between 16M and 1G, then add this offset to the starting address, 0xffffffff80000000. Here 16M is the offset which is decided at linking stage. So the amount of the local variable 'virt_addr' which respresents the offset plus the kernel output size can not exceed KERNEL_IMAGE_SIZE. Add a debug check for the offset. If out of bounds, print error message and hang there. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1498567146-11990-2-git-send-email-bhe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Sabrina Dubroca authored
Always try to parse an address, since kstrtoul() will safely fail when given a symbol as input. If that fails (which will be the case for a symbol), try to parse a symbol instead. This allows creating a probe such as: p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0 Which is necessary for this command to work: perf probe -m 8021q -a vlan_gro_receive Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net Cc: stable@vger.kernel.org Fixes: 413d37d1 ("tracing: Add kprobe-based event tracer") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
James Hogan authored
Since commit 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") show_backtrace() invokes the raw backtracer when cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels where user and kernel address spaces overlap. However this is used by show_stack() which creates its own pt_regs on the stack and leaves cp0_status uninitialised in most of the code paths. This results in the non deterministic use of the raw back tracer depending on the previous stack content. show_stack() deals exclusively with kernel mode stacks anyway, so explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure we get a useful backtrace. Fixes: 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/16656/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Recent CPUs from Imagination Technologies such as the I6400 or P6600 are able to speculatively fetch data from memory into caches. This means that if used in a system with non-coherent DMA they require that caches be invalidated after a device performs DMA, and before the CPU reads the DMA'd data, in order to ensure that stale values weren't speculatively prefetched. Such CPUs also introduced Memory Accessibility Attribute Registers (MAARs) in order to control the regions in which they are allowed to speculate. Thus we can use the presence of MAARs as a good indication that the CPU requires the above cache maintenance. Use the presence of MAARs to determine the result of cpu_needs_post_dma_flush() in the default case, in order to handle these recent CPUs correctly. Note that the return type of cpu_needs_post_dma_flush() is changed to bool, such that it's clearer what's happening when cpu_has_maar is cast to bool for the return value. If this patch were backported to a pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is currently 1ull<<30, so when truncated to an int gives a non-zero value anyway, but even so the implicit conversion from long long int to bool makes it clearer to understand what will happen than the implicit conversion from long long int to int would. The bool return type also fits this usage better semantically, so seems like an all-round win. Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting the return type change. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Ed Blake <ed.blake@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16363/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/15385/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
We allocate memory for a ready_count variable per-CPU, which is accessed via a cached non-coherent TLB mapping to perform synchronisation between threads within the core using LL/SC instructions. In order to ensure that the variable is contained within its own data cache line we allocate 2 lines worth of memory & align the resulting pointer to a line boundary. This is however unnecessary, since kmalloc is guaranteed to return memory which is at least cache-line aligned (see ARCH_DMA_MINALIGN). Stop the redundant manual alignment. Besides cleaning up the code & avoiding needless work, this has the side effect of avoiding an arithmetic error found by Bryan on 64 bit systems due to the 32 bit size of the former dlinesz. This led the ready_count variable to have its upper 32b cleared erroneously for MIPS64 kernels, causing problems when ready_count was later used on MIPS64 via cpuidle. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 3179d37e ("MIPS: pm-cps: add PM state entry code for CPS systems") Reported-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> # v3.16+ Patchwork: https://patchwork.linux-mips.org/patch/15383/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 29 Jun, 2017 5 commits
-
-
Doug Berger authored
The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by: Doug Berger <opendmb@gmail.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to access netdev->num_rx_queues behind an accessor in netvsc driver otherwise the build breaks with some configs, from Arnd Bergmann. 2) Add dummy xfrm_dev_event() so that build doesn't fail when CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu. 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan Carpenter. 4) Fix MCDI command size for filter operations in sfc driver, from Martin Habets. 5) Fix UFO segmenting so that we don't calculate incorrect checksums, from Michal Kubecek. 6) When ipv6 datagram connects fail, reset destination address and port. From Wei Wang. 7) TCP disconnect must reset the cached receive DST, from WANG Cong. 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric Dumazet. 9) fman driver has to depend on HAS_DMA, from Madalin Bucur. 10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann. 11) Fix negative page counts with GFO, from Michal Kubecek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) sfc: fix attempt to translate invalid filter ID net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() bpf: prevent leaking pointer via xadd on unpriviledged arcnet: com20020-pci: add missing pdev setup in netdev structure arcnet: com20020-pci: fix dev_id calculation arcnet: com20020: remove needless base_addr assignment Trivial fix to spelling mistake in arc_printk message arcnet: change irq handler to lock irqsave rocker: move dereference before free mlxsw: spectrum_router: Fix NULL pointer dereference net: sched: Fix one possible panic when no destroy callback virtio-net: serialize tx routine during reset net: usb: asix88179_178a: Add support for the Belkin B2B128 fsl/fman: add dependency on HAS_DMA net: prevent sign extension in dev_get_stats() tcp: reset sk_rx_dst in tcp_disconnect() net: ipv6: reset daddr and dport in sk if connect() fails bnx2x: Don't log mc removal needlessly bnxt_en: Fix netpoll handling. bnxt_en: Add missing logic to handle TPA end error conditions. ...
-
Linus Torvalds authored
Merge tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - dm thinp fix for crash that will occur when metadata device failure races with discard passdown to the underlying data device. - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member unconditionally. * tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: do not queue freed thin mapping for next stage processing dm raid: fix oops on upgrading to extended superblock format
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two fixes that should go into this release. One is an nvme regression fix from Keith, fixing a missing queue freeze if the controller is being reset. This causes the reset to hang. The other is a fix for a leak of the bio protection info, if smaller sized O_DIRECT is used. This fix should be more involved as we have other problematic paths in the kernel, but given as this isn't a regression in this series, we'll tackle those for 4.13" * 'for-linus' of git://git.kernel.dk/linux-block: block: provide bio_uninit() free freeing integrity/task associations nvme/pci: Fix stuck nvme reset
-
Edward Cree authored
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998b ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-