- 02 May, 2007 40 commits
-
-
David Rientjes authored
Extends the numa=fake x86_64 command-line option to split the remaining system memory into equal-sized nodes. For example: numa=fake=2*512,4* gives two 512M nodes and the remaining system memory is split into four approximately equal chunks. This is beneficial for systems where the exact size of RAM is unknown or not necessarily relevant, but the granularity with which nodes shall be allocated is known. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
David Rientjes authored
Extends the numa=fake x86_64 command-line option to allow for configurable node sizes. These nodes can be used in conjunction with cpusets for coarse memory resource management. The old command-line option is still supported: numa=fake=32 gives 32 fake NUMA nodes, ignoring the NUMA setup of the actual machine. But now you may configure your system for the node sizes of your choice: numa=fake=2*512,1024,2*256 gives two 512M nodes, one 1024M node, two 256M nodes, and the rest of system memory to a sixth node. The existing hash function is maintained to support the various node sizes that are possible with this implementation. Each node of the same size receives roughly the same amount of available pages, regardless of any reserved memory with its address range. The total available pages on the system is calculated and divided by the number of equal nodes to allocate. These nodes are then dynamically allocated and their borders extended until such time as their number of available pages reaches the required size. Configurable node sizes are recommended when used in conjunction with cpusets for memory control because it eliminates the overhead associated with scanning the zonelists of many smaller full nodes on page_alloc(). Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Ahmed S. Darwish authored
Fix comments to represent the true number of quadwords in GDT. Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Adrian Bunk authored
This patch makes the needlessly global vmi_pmd_clear() static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Yinghai Lu authored
Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Ralf Baechle authored
Reorder code to avoid multiple inclusion of elf.h. #undef several symbols to avoid build errors over redefinitions. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
john stultz authored
Change mark_tsc_unstable() so it takes a string argument, which holds the reason the TSC was marked unstable. This is then displayed the first time mark_tsc_unstable is called. This should help us better debug why the TSC was marked unstable on certain systems and allow us to make sure we're not being overly paranoid when throwing out this troublesome clocksource. Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Adrian Bunk authored
Work around a warning with -Wmissing-prototypes in arch/i386/kernel/asm-offsets.c The warning isn't gcc's fault - asm-offsets.c is simply a special file. Signed-off-by:
-
Ken Chen authored
clean up unneeded type cast by properly declare data type. Signed-off-by:
Ken Chen <kenchen@google.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Vivek Goyal authored
o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode' WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode' WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode' WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check' WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present' o Some functions which are inline (acpi_madt_oem_check) are not inlined by compiler as these functions are accessed using function pointer. These functions are put in .text section and they in-turn access __init type functions hence modpost generates warnings. o Do not iniline acpi_madt_oem_check, instead make it __init. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Ravikiran G Thirumalai authored
Enable system hashtable memory to be distributed among nodes on x86_64 NUMA Forcing the kernel to use node interleaved vmalloc instead of bootmem for the system hashtable memory (alloc_large_system_hash) reduces the memory imbalance on node 0 by around 40MB on a 8 node x86_64 NUMA box: Before the following patch, on bootup of a 8 node box: Node 0 MemTotal: 3407488 kB Node 0 MemFree: 3206296 kB Node 0 MemUsed: 201192 kB Node 0 Active: 7012 kB Node 0 Inactive: 512 kB Node 0 Dirty: 0 kB Node 0 Writeback: 0 kB Node 0 FilePages: 1912 kB Node 0 Mapped: 420 kB Node 0 AnonPages: 5612 kB Node 0 PageTables: 468 kB Node 0 NFS_Unstable: 0 kB Node 0 Bounce: 0 kB Node 0 Slab: 5408 kB Node 0 SReclaimable: 644 kB Node 0 SUnreclaim: 4764 kB After the patch (or using hashdist=1 on the kernel command line): Node 0 MemTotal: 3407488 kB Node 0 MemFree: 3247608 kB Node 0 MemUsed: 159880 kB Node 0 Active: 3012 kB Node 0 Inactive: 616 kB Node 0 Dirty: 0 kB Node 0 Writeback: 0 kB Node 0 FilePages: 2424 kB Node 0 Mapped: 380 kB Node 0 AnonPages: 1200 kB Node 0 PageTables: 396 kB Node 0 NFS_Unstable: 0 kB Node 0 Bounce: 0 kB Node 0 Slab: 6304 kB Node 0 SReclaimable: 1596 kB Node 0 SUnreclaim: 4708 kB I guess it is a good idea to keep HASHDIST_DEFAULT "on" for x86_64 NUMA since x86_64 has no dearth of vmalloc space? Or maybe enable hash distribution for all 64bit NUMA arches? The following patch does it only for x86_64. I ran a HPC MPI benchmark -- 'Ansys wingsolid', which takes up quite a bit of memory and uses up tlb entries. This was on a 4 way, 2 socket Tyan AMD box (non vsmp), with 8G total memory (4G pernode). The results with and without hash distribution are: 1. Vanilla - runtime of 1188.000s 2. With hashdist=1 runtime of 1154.000s Oprofile output for the duration of run is: 1. Vanilla: PU: AMD64 processors, speed 2411.16 MHz (estimated) Counted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit mask of 0x00 (No unit mask) count 500 samples % app name symbol name 163054 6.5513 libansys1.so MultiFront::decompose(int, int, Elemset *, int *, int, int, int) 162061 6.5114 libansys3.so blockSaxpy6L_fd 162042 6.5107 libansys3.so blockInnerProduct6L_fd 156286 6.2794 libansys3.so maxb33_ 87879 3.5309 libansys1.so elmatrixmultpcg_ 84857 3.4095 libansys4.so saxpy_pcg 58637 2.3560 libansys4.so .st4560 46612 1.8728 libansys4.so .st4282 43043 1.7294 vmlinux-t copy_user_generic_string 41326 1.6604 libansys3.so blockSaxpyBackSolve6L_fd 41288 1.6589 libansys3.so blockInnerProductBackSolve6L_fd 2. With hashdist=1 CPU: AMD64 processors, speed 2411.13 MHz (estimated) Counted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit mask of 0x00 (No unit mask) count 500 samples % app name symbol name 162993 6.9814 libansys1.so MultiFront::decompose(int, int, Elemset *, int *, int, int, int) 160799 6.8874 libansys3.so blockInnerProduct6L_fd 160459 6.8729 libansys3.so blockSaxpy6L_fd 156018 6.6826 libansys3.so maxb33_ 84700 3.6279 libansys4.so saxpy_pcg 83434 3.5737 libansys1.so elmatrixmultpcg_ 58074 2.4875 libansys4.so .st4560 46000 1.9703 libansys4.so .st4282 41166 1.7632 libansys3.so blockSaxpyBackSolve6L_fd 41033 1.7575 libansys3.so blockInnerProductBackSolve6L_fd 35762 1.5318 libansys1.so inner_product_sub 35591 1.5245 libansys1.so inner_product_sub2 28259 1.2104 libansys4.so addVectors Signed-off-by:
Pravin B. Shelar <pravin.shelar@calsoftinc.com> Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
Christoph Lameter <clameter@engr.sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
Previously it wasn't enabled in the binfmt_aout is a module case. Signed-off-by: -
Andi Kleen authored
When compiling with -Os (which is default) the compiler defaults to it anyways. And with -O2 it probably generates somewhat better (although also larger) code. Signed-off-by: -
Andrew Morton authored
Fix for the following patch. Provide dummy cpufreq functions when CPUFREQ is not compiled in. Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Vivek Goyal authored
o This patch moves the code to verify long mode and SSE to a common file. This code is now shared by trampoline.S, wakeup.S, boot/setup.S and boot/compressed/head.S o So far we used to do very limited check in trampoline.S, wakeup.S and in 32bit entry point. Now all the entry paths are forced to do the exhaustive check, including SSE because verify_cpu is shared. o I am keeping this patch as last in the x86 relocatable series because previous patches have got quite some amount of testing done and don't want to distrub that. So that if there is problem introduced by this patch, at least it can be easily isolated. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Vivek Goyal authored
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses. o As of today kdump uses it to run a second kernel from a reserved memory area. Signed-off-by:
-
Vivek Goyal authored
o X86_64 kernel should run from 2MB aligned address for two reasons. - Performance. - For relocatable kernels, page tables are updated based on difference between compile time address and load time physical address. This difference should be multiple of 2MB as kernel text and data is mapped using 2MB pages and PMD should be pointing to a 2MB aligned address. Life is simpler if both compile time and load time kernel addresses are 2MB aligned. o Flag the error at compile time if one is trying to build a kernel which does not meet alignment restrictions. Signed-off-by:
-
Vivek Goyal authored
This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by:
-
Vivek Goyal authored
Currently __pa_symbol is for use with symbols in the kernel address map and __pa is for use with pointers into the physical memory map. But the code is implemented so you can usually interchange the two. __pa which is much more common can be implemented much more cheaply if it is it doesn't have to worry about any other kernel address spaces. This is especially true with a relocatable kernel as __pa_symbol needs to peform an extra variable read to resolve the address. There is a third macro that is added for the vsyscall data __pa_vsymbol for finding the physical addesses of vsyscall pages. Most of this patch is simply sorting through the references to __pa or __pa_symbol and using the proper one. A little of it is continuing to use a physical address when we have it instead of recalculating it several times. swapper_pgd is now NULL. leave_mm now uses init_mm.pgd and init_mm.pgd is initialized at boot (instead of compile time) to the physmem virtual mapping of init_level4_pgd. The physical address changed. Except for the for EMPTY_ZERO page all of the remaining references to __pa_symbol appear to be during kernel initialization. So this should reduce the cost of __pa in the common case, even on a relocated kernel. As this is technically a semantic change we need to be on the lookout for anything I missed. But it works for me (tm). Signed-off-by:
-
Vivek Goyal authored
o virt_to_page() call should be used on kernel linear addresses and not on kernel text and data addresses. Swsusp code uses it on kernel data (statically allocated swsusp_header). o Allocate swsusp_header dynamically so that virt_to_page() can be used safely. o I am changing this because in next few patches, __pa() on x86_64 will no longer support kernel text and data addresses and hibernation breaks. Signed-off-by:
-
Vivek Goyal authored
o __pa() should be used only on kernel linearly mapped virtual addresses and not on kernel text and data addresses. o Hibernation code needs to determine the physical address associated with kernel symbol to mark a section boundary which contains pages which don't have to be saved and restored during hibernate/resume operation. o Move this piece of code in arch dependent section. So that architectures which don't have kernel text/data mapped into kernel linearly mapped region can come up with their own ways of determining physical addresses associated with a kernel text. Signed-off-by:
-
Vivek Goyal authored
With the rewrite of the SMP trampoline and the early page allocator there is nothing that needs identity mapped pages, once we start executing C code. So add zap_identity_mappings into head64.c and remove zap_low_mappings() from much later in the code. The functions are subtly different thus the name change. This also kills boot_level4_pgt which was from an earlier attempt to move the identity mappings as early as possible, and is now no longer needed. Essentially I have replaced boot_level4_pgt with trampoline_level4_pgt in trampoline.S Signed-off-by:
-
Vivek Goyal authored
Signed-off-by:
-
Vivek Goyal authored
o Moved wakeup_level4_pgt into the wakeup routine so we can run the kernel above 4G. o Now we first go to 64bit mode and continue to run from trampoline and then then start accessing kernel symbols and restore processor context. This enables us to resume even in relocatable kernel context when kernel might not be loaded at physical addr it has been compiled for. o Removed the need for modifying any existing kernel page table. o Increased the size of the wakeup routine to 8K. This is required as wake page tables are on trampoline itself and they got to be at 4K boundary, hence one page is not sufficient. Signed-off-by:
-
Vivek Goyal authored
o Various cleanups. One of the main purpose of cleanups is that make wakeup.S as close as possible to trampoline.S. o Following are the changes - Indentations for comments. - Changed the gdt table to compact form and to resemble the one in trampoline.S - Take the jump to 32bit from real mode using ljmpl. Makes code more readable. - After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode" - Stack is not used after real mode. So don't load stack in 32 bit mode. - No need to enable PGE here. - No need to do extra EFER read, anyway we trash the read contents. - No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored. - No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state. Signed-off-by:
-
Vivek Goyal authored
o Use appropriate names for 64bit regsiters. Signed-off-by:
-
Vivek Goyal authored
o Get rid of dead code in wakeup.S o We never restore from saved_gdt, saved_idt, saved_ltd, saved_tss, saved_cr3, saved_cr4, saved_cr0, real_save_gdt, saved_efer, saved_efer2. Get rid of of associated code. o Get rid of bogus_magic, bogus_31_magic and bogus_magic2. No longer being used. Signed-off-by:
-
Vivek Goyal authored
This modifies the SMP trampoline and all of the associated code so it can jump to a 64bit kernel loaded at an arbitrary address. The dependencies on having an idenetity mapped page in the kernel page tables for SMP bootup have all been removed. In addition the trampoline has been modified to verify that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly. Signed-off-by:
-
Vivek Goyal authored
EFER varies like %cr4 depending on the cpu capabilities, and which cpu capabilities we want to make use of. So save/restore it make certain we have the same EFER value when we are done. Signed-off-by:
-
Vivek Goyal authored
Move __KERNEL32_CS up into the unused gdt entry. __KERNEL32_CS is used when entering the kernel so putting it first is useful when trying to keep boot gdt sizes to a minimum. Set the accessed bit on all gdt entries. We don't care so there is no need for the cpu to burn the extra cycles, and it potentially allows the pages to be immutable. Plus it is confusing when debugging and your gdt entries mysteriously change. Signed-off-by:
-
Vivek Goyal authored
Use virtual addresses instead of physical addresses in copy bootdata. In addition fix the implementation of the old bootloader convention. Everything is at real_mode_data always. It is just that sometimes real_mode_data was relocated by setup.S to not sit at 0x90000. Signed-off-by:
-
Vivek Goyal authored
Signed-off-by:
-
Vivek Goyal authored
- Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by:
-
Vivek Goyal authored
Early in the boot process we need the ability to set up temporary mappings, before our normal mechanisms are initialized. Currently this is used to map pages that are part of the page tables we are building and pages during the dmi scan. The core problem is that we are using the user portion of the page tables to implement this. Which means that while this mechanism is active we cannot catch NULL pointer dereferences and we deviate from the normal ways of handling things. In this patch I modify early_ioremap to map pages into the kernel portion of address space, roughly where we will later put modules, and I make the discovery of which addresses we can use dynamic which removes all kinds of static limits and remove the dependencies on implementation details between different parts of the code. Now alloc_low_page() and unmap_low_page() use early_iomap() and early_iounmap() to allocate/map and unmap a page. Signed-off-by:
-
Vivek Goyal authored
This patch makes pgtable.h and page.h safe to include in assembly files like head.S. Allowing us to use symbolic constants instead of hard coded numbers when refering to the page tables. This patch copies asm-sparc64/const.h to asm-x86_64 to get a definition of _AC() a very convinient macro that allows us to force the type when we are compiling the code in C and to drop all of the type information when we are using the constant in assembly. Previously this was done with multiple definition of the same constant. const.h was modified slightly so that it works when given CONFIG options as arguments. This patch adds #ifndef __ASSEMBLY__ ... #endif and _AC(1,UL) where appropriate so the assembler won't choke on the header files. Otherwise nothing should have changed. AK: added const.h to exported headers to fix headers_check Signed-off-by:
-
Stephen Hemminger authored
The dma_ops structure can be const since it never changes after boot. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
smp_call_function and smp_call_function_single are almost complete duplicates of the same logic. This patch combines them by implementing them in terms of the more general smp_call_function_mask(). Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
