- 15 Jan, 2012 3 commits
-
-
Mauro Carvalho Chehab authored
The changeset 240ab508 is incomplete, as the first thing that happens at cache clear is to do a memset with 0 to the cache. So, the delivery system needs to be explicitly preserved there. Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
As reported by Lawrence[1], MythTV 0.24.1 does the wrong thing with a DVBv5 call: it fills the delivery system with SYS_UNDEFINED, expecting that the DVB core would work with that. This used to work by accident, as the DVB core were missing the check for the supported delivery systems. Yet, fixing it is easy, so let's add a logic to handle this case, to provide backward compatibility. [1] http://patchwork.linuxtv.org/patch/8314/Signed-off-by:
-
Antti Palosaari authored
I added it by mistake. It is useless as no real hardware. It even uses even Cypress FX2, general USB bridge chip, default IDs that makes driver load all FX2 devices having default ID... Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
- 11 Jan, 2012 37 commits
-
-
Mauro Carvalho Chehab authored
Some time ago, Manoel sent us a patch adding more stuff to the init sequence. However, his patch were also doing non-related stuff, by changing the init logic without any good reason. So, it was asked for him to submit a patch with just the data that has changed, in order to allow us to better analyze it. As he didn't what it was requested, I finally found some time to dig into his init sequence and add it here. Basically, new stuff is added there. There are a few changes: 1) The removal of the extra (duplicated) logic that puts the chip into the serial mode; 2) Some Viterbi VBER measurement init data was changed from 0x00 to 0xff for layer A, to match what was done for layers B and C. None of those caused any regressions and both make sense on my eyes. The other parameters additions actually increased the tuning quality for some channels. Yet, some channels that were previously discovered with scan disappered, while others appeared instead. This were tested in Brasilia, with an external antena. At the overall, it is now a little better. So, better to add these, and then try to figure out a configuration that would get even better scanning results. Reported-by:
Manoel Pinheiro <pinusdtv@hotmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
On mb86a20s, some registers have sub-addresses, while others not. In order to make easier to compare different settings, group them. No functional changes in this patch. Signed-off-by: -
Mauro Carvalho Chehab authored
As a DVBv3 application may be relying on the delivery system, don't reset it at DTV_CLEAR. For DVBv5 applications, the delivery system should be set anyway. Signed-off-by: -
Malcolm Priestley authored
Fix error where SNR unstable and jumps levels. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Steven Toth authored
We can pass a NO_SIGNAL video decoder state back to applications if it's available. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Steven Toth authored
Allow bridge drivers to query status. Signed-off-by:
-
Samuel Rakitnican authored
This remote was added with support for card Compro VideoMate M1F. This remote is shipped with various Compro cards, not this one only. Furthermore this remote can be bought separately under name Compro VideoMate K100. http://compro.com.tw/en/product/k100/k100.html So give it a proper name. [mchehab@redhat.com: Fix the Makefile] Signed-off-by:Samuel Rakitničan <samuel.rakitnican@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Fix the following build warning: warning: (VIDEO_AU0828) selects DVB_AU8522 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && I2C && VIDEO_V4L2) Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Axel Lin authored
This patch converts the drivers in drivers/media/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: "Richard Röjfors" <richard.rojfors@pelagicore.com> Cc: "Matti J. Aaltonen" <matti.j.aaltonen@nokia.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Muralidharan Karicheri <m-karicheri2@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
-
Fabio Estevam authored
Fix the following build warning: warning: (VIDEO_CX231XX_DVB) selects DVB_MB86A20S which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && I2C) Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add driver for the JPEG codec IP block available in Samsung Exynos SoC series. The driver is implemented as a V4L2 mem-to-mem device. It exposes two video nodes to user space, one for the encoding part, and one for the decoding part. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Tomasz Stanislawski authored
Pixels were preferred units for selection rectangles over driver-dependent units for almost all use cases. Therefore the units were fixed to pixels. Signed-off-by:
-
Tomasz Stanislawski authored
Adjusting of Video Processor's scaling factors was flawed. It bounded scaling to range 1/16 to 1/1. The correct range should be 1/4 to 4/1. This patch fixes this bug. Signed-off-by:
-
Tomasz Stanislawski authored
This patch add support for V4L2 selection API to s5p-tv driver. Moreover it removes old API for cropping. Old applications would still work because the crop ioctls are emulated using the selection API. Signed-off-by:
-
Tomasz Stanislawski authored
This patch allows new video drivers to work correctly with applications that use the old-style crop API. The old crop ioctl is emulated by using selection callbacks. Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds a documentation for VIDIOC_{G/S}_SELECTION ioctl. Moreover, the patch adds the description of modeling of composing, cropping and scaling features in V4L2. Finally, some examples are presented. Signed-off-by: -
Tomasz Stanislawski authored
This patch adds images in binary format for the V4L2 selection API. Signed-off-by:
-
Tomasz Stanislawski authored
This patch introduces new api for a precise control of cropping and composing features for video devices. The new ioctls are VIDIOC_S_SELECTION and VIDIOC_G_SELECTION. Signed-off-by:
-
Antti Palosaari authored
Fix some issues pointed out by Mauro. Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Antti Palosaari authored
Allow use of that general callback for demod too. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Sascha Sommer authored
The card definition of the Terratec Cinergy 200 USB uses the wrong tuner type. Therefore some channels are currently missing. Attached patch fixes this problem. Signed-off-by:
Sascha Sommer <saschasommer@freenet.de> Signed-off-by:
-
Sascha Sommer authored
The MaxPacketSize for em2800 based devices is too small to capture at full resolution. Therefore scale down when the maximum frame size is selected. The previous workaround that simply reduced the X resolution cannot be used because it crops a part of the input as the em2800 can only scale down with a factor of 0.5. reverts commits 1ca31892 and fb3de039. [mchehab@redhat.com: Fix CodingStyle] Signed-off-by:
-
Sascha Sommer authored
writing the EM28XX_R06_I2C_CLK register leads to the problem that the i2c bus on the Terratec Cinergy 200 USB is no longer usable when the system is rebooted. The device needs to be unplugged in order to bring it back to life. Attached patch conditionally disables the write in em28xx_pre_card_setup() like it is already done in em28xx_card_setup(). Signed-off-by:
-
Sascha Sommer authored
It looks like the return value check that is done after setting the I2C speed checks the wrong return code. Signed-off-by:
-
Thomas Petazzoni authored
The 'struct em28xx *' pointer was passed by reference to the em28xx_init_dev() function, for no reason. Instead, just pass it by value, which is much more logical and simple. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Jonathan Nieder authored
The af9005_properties and af9015_properties tables make use of USB ids from the USB id tables with hardcoded indices, as in "&af9015_usb_table[30]". Adding new entries before the end breaks such references, so everyone has had to carefully tiptoe to only add entries at the end of the list. In the spirit of "dw2102: use symbolic names for dw2102_table indices", use C99-style initializers with symbolic names for each index to avoid this. In the new regime, properties tables referring to the USB ids have names like "&af9015_usb_table[CINERGY_T_STICK_RC]" that do not change meaning when items in the USB id table are reordered. Encouraged-by:
Jonathan Nieder <jrnieder@gmail.com> Acked-by:
Luca Olivetti <luca@ventoso.org> Acked-by:
-
Thomas Petazzoni authored
URBs allocated with usb_alloc_urb() are allocated from DMA-coherent areas, and therefore it is not necessary to call dma_map_single() on such buffers. Worst, on ARM, calling dma_map_single() on a DMA-coherent buffer will trigger a BUG_ON() in arch/arm/mm/dma-mapping.c. Therefore, we mark all URBs allocated with usb_alloc_urb() with the URB_NO_TRANSFER_DMA_MAP transfer_flags, so that the USB core does not do dma_map_single()/dma_unmap_single() on those buffers. This is similar to 882787ff for the gspca driver, and has already been discussed on the linux-media list in the past: http://www.mail-archive.com/linux-media@vger.kernel.org/msg37086.html. Signed-off-by:
-
Thomas Petazzoni authored
The 'struct cx231xx *' pointer was passed by reference to the cx231xx_init_dev() function, for no reason. Instead, just pass it by value, which is much more logical and simple. Signed-off-by:
-
Antti Palosaari authored
DVB-T did not work at all - only 6 MHz was working but it is not commonly used. Fix it. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The driver were using DEV_MISCONFIGURED on some places, and DEV_DISCONNECTED on others. In a matter of fact, DEV_MISCONFIGURED were set only during the usb disconnect callback, with was confusing. Also, the alsa driver never checks if the device is present, before doing some dangerous things. Remove DEV_MISCONFIGURED, replacing it by DEV_DISCONNECTED. Also, fixes the other usecases for DEV_DISCONNECTED. Signed-off-by: -
Mauro Carvalho Chehab authored
cx231xx_devused is racy. Re-implement it in a proper way, to remove the risk of mangling it. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several weirdness at the unregister logic. First of all, IR has a poll thread. This thread needs to be removed, as it uses some resources associated to the main driver. So, the driver needs to explicitly unregister the I2C client for ir-kbd-i2c. If, for some reason, the driver needs to wait for a close() to happen, not all memories will be freed, because the free logic were in the wrong place. Also, v4l2_device_unregister() seems to be called too early, as devices are still using it. Finally, even with the device disconnected, there is one USB function call that will still try to talk with it. Signed-off-by:
-
