- 31 Oct, 2016 16 commits
-
-
Mintz, Yuval authored
Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
Signed-off-by:
-
Sudarsana Kalluru authored
Management firmware is interested in various tidbits about the driver - including the driver state & several configuration related fields [MTU, primtary MAC, etc.]. This adds the necessray logic to update MFW with such configurations, some of which are passed directly via qed while for others APIs are provide so that qede would be able to later configure if needed. This also introduces a new default configuration for MTU which would replace the default inherited by being an ethernet device. Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Julia Lawall authored
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Use DEVICE_ATTR_RO for read only attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @ro@ declarer name DEVICE_ATTR; identifier x,x_show; @@ DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); @script:ocaml@ x << ro.x; x_show << ro.x_show; @@ if not (x^"_show" = x_show) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RO; identifier ro.x,ro.x_show; @@ - DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); + DEVICE_ATTR_RO(x); // </smpl> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
While commit bb35a6ef ("bpf, inode: allow for rename and link ops") added support for hard links that can be used for prog and map nodes, this work adds simple symlink support, which can be used f.e. for directories also when unpriviledged and works with cmdline tooling that understands S_IFLNK anyway. Since the switch in e27f4a94 ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), there can be various mount instances with mount_nodev() and thus hierarchy can be flattened to facilitate object sharing. Thus, we can keep bpf tooling also working by repointing paths. Most of the functionality can be used from vfs library operations. The symlink is stored in the inode itself, that is in i_link, which is sufficient in our case as opposed to storing it in the page cache. While at it, I noticed that bpf_mkdir() and bpf_mkobj() don't update the directories mtime and ctime, so add a common helper for it called bpf_dentry_finalize() that takes care of it for all cases now. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Aaron Young authored
The following patch fixes an issue with the ldmvsw driver where the network connection of a guest domain becomes non-functional after the guest domain has panic'd and rebooted. The root cause was determined to be from the following series of events: 1. Guest domain panics - resulting in the guest no longer processing network packets (from ldmvsw driver) 2. The ldmvsw driver (in the control domain) eventually exerts flow control due to no more available tx drings and stops the tx queue for the guest domain 3. The LDC of the network connection for the guest is reset when the guest domain reboots after the panic. 4. The LDC reset event is received by the ldmvsw driver and the ldmvsw responds by clearing the tx queue for the guest. 5. ldmvsw waits indefinitely for a DATA ACK from the guest - which is the normal method to re-enable the tx queue. But the ACK never comes because the tx queue was cleared due to the LDC reset. To fix this issue, in addition to clearing the tx queue, re-enable the tx queue on a LDC reset. This prevents the ldmvsw from getting caught in this deadlocked state of waiting for a DATA ACK which will never come. Signed-off-by:
Aaron Young <Aaron.Young@oracle.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
David S. Miller authored
Alexander Duyck says: ==================== Add support for XPS when using DCB This patch series enables proper isolation between traffic classes when using XPS while DCB is enabled. Previously enabling XPS would cause the traffic to be potentially pulled from one traffic class into another on egress. This change essentially multiplies the XPS map by the number of traffic classes and allows us to do a lookup per traffic class for a given CPU. To guarantee the isolation I invalidate the XPS map for any queues that are moved from one traffic class to another, or if we change the number of traffic classes. v2: Added sysfs to display traffic class Replaced do/while with for loop Cleaned up several other for for loops throughout the patch ==================== Signed-off-by: -
Alexander Duyck authored
This patch adds support for setting and using XPS when QoS via traffic classes is enabled. With this change we will factor in the priority and traffic class mapping of the packet and use that information to correctly select the queue. This allows us to define a set of queues for a given traffic class via mqprio and then configure the XPS mapping for those queues so that the traffic flows can avoid head-of-line blocking between the individual CPUs if so desired. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch updates the code for removing queues from the XPS map and makes it so that we can apply the code any time we change either the number of traffic classes or the mapping of a given block of queues. This way we avoid having queues pulling traffic from a foreign traffic class. Signed-off-by:
-
Alexander Duyck authored
Add a sysfs attribute for a Tx queue that allows us to determine the traffic class for a given queue. This will allow us to more easily determine this in the future. It is needed as XPS will take the traffic class for a group of queues into account in order to avoid pulling traffic from one traffic class into another. Signed-off-by:
-
Alexander Duyck authored
The functions for configuring the traffic class to queue mappings have other effects that need to be addressed. Instead of trying to export a bunch of new functions just relocate the functions so that we can instrument them directly with the functionality they will need. Signed-off-by:
-
Gao Feng authored
The current codes use _IOC_TYPE(cmd) == 0x89 to check if the cmd is one socket ioctl command like SIOCGIFHWADDR. But the literal number 0x89 may confuse readers. So create one macro SOCK_IOC_TYPE to enhance the readability. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Andrey Vagin authored
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
David S. Miller authored
The second SET_NETDEV_DEV() in the hunk should be removed. Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
One merge conflict block wasn't resolved. Reported-by:
-
- 30 Oct, 2016 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdmaDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 core driver updates 2016-10-25 This series contains some updates and fixes of mlx5 core and IB drivers with the addition of two features that demand new low level commands and infrastructure updates. - SRIOV VF max rate limit support - mlx5e tc support for FWD rules with counter. Needed for both net and rdma subsystems. Updates and Fixes: From Saeed Mahameed (2): - mlx5 IB: Skip handling unknown mlx5 events - Add ConnectX-5 PCIe 4.0 VF device ID From Artemy Kovalyov (2): - Update struct mlx5_ifc_xrqc_bits - Ensure SRQ physical address structure endianness From Eugenia Emantayev (1): - Fix length of async_event_mask New Features: From Mohamad Haj Yahia (3): mlx5 SRIOV VF max rate limit support - Introduce TSAR manipulation firmware commands - Introduce E-switch QoS management - Add SRIOV VF max rate configuration support From Mark Bloch (7): mlx5e Tc support for FWD rule with counter - Don't unlock fte while still using it - Use fte status to decide on firmware command - Refactor find_flow_rule - Group similar rules under the same fte - Add multi dest support - Add option to add fwd rule with counter - mlx5e tc support for FWD rule with counter Mark here fixed two trivial issues with the flow steering core, and did some refactoring in the flow steering API to support adding mulit destination rules to the same hardware flow table entry at once. In the last two patches added the ability to populate a flow rule with a flow counter to the same flow entry. V2: Dropped some patches that added new structures without adding any usage of them. Added SRIOV VF max rate configuration support patch that introduces the usage of the TSAR infrastructure. Added flow steering fixes and refactoring in addition to mlx5 tc support for forward rule with counter. ==================== Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add Infiniband support for Mellanox switches This patchset adds basic Infiniband support for SwitchX-2, Switch-IB and Switch-IB-2 ASIC drivers. SwitchX-2 ASIC is VPI capable, which means each port can be either Ethernet or Infiniband. When the port is configured as Infiniband, the Subnet Management Agent (SMA) is managed by the SwitchX-2 firmware and not by the host. Port configuration, MTU and more are configured remotely by the Subnet Manager (SM). Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Switch-IB (FDR) and Switch-IB-2 (EDR 100Gbs) ASICs are Infiniband-only switches. The support provided in the mlxsw_switchib.ko driver is port initialization only. The firmware running in the Silicon implements the SMA. Please note that this patchset does only very basic port initialization. ib_device or RDMA implementations are not part of this patchset. ==================== Signed-off-by: -
Elad Raz authored
SwitchIB and SwitchIB-2 are Infiniband switches with up to 36 ports. This driver initialize the hardware and Firmware which implements the IB management and connection with the SM. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Elad Raz authored
SwitchX-2 is IB capable device. This patch add a support to change the port type between Ethernet and Infiniband. When the port is set to IB, the FW implements the Subnet Management Agent (SMA) manage the port. All port attributes can be control remotely by the SM. Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Signed-off-by:
-
Elad Raz authored
Since we are about to add Infiniband port remove and create we will add "eth" prefix to port create and remove APIs. Signed-off-by:
-
Elad Raz authored
Add "port_type_set" API to mlxsw core. The core layer send the change type callback to the port along with it's private information. Signed-off-by:
-
Elad Raz authored
Since we are about to introduce IB port APIs, we will add prefixes to existing APIs. Signed-off-by:
-
Elad Raz authored
In order to put a port in Infiniband fabric it should be assigned to separate swid (Switch partition) that initialized as IB swid. Signed-off-by:
-
Jiri Pirko authored
Currently, devlink register/unregister is done directly from spectrum/switchx2 port create/remove functions. With a need to introduce a port type change, the devlink port instances have to be persistent across type changes, therefore across port create/remove function calls. So do a bit of reshuffling to achieve that. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Elad Raz authored
In order to change a port type to Infiniband port we should change his mapping from local-port to Infiniband. Adding the PLIB (Port Local to InfiniBand) allows this mapping. Signed-off-by:
-
Elad Raz authored
In order to support Infiniband fabric, we need to introduce IB speeds and capabilities to PTYS emads. Signed-off-by:
-
Elad Raz authored
We want to add Infiniband support to PTYS. In order to maintain proper conventions, we will change pack and unpack prefix to eth. Signed-off-by:
-
Elad Raz authored
In SwitchX-2 we configure the port speed to negotiate with 40G link only. Add support for all other supported speeds. Fixes: 31557f0f ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by:
-
Elad Raz authored
Export to userspace the front panel name of the port, so that udev can rename the ports accordingly. The convention suggested by switchdev documentation is used: pX Signed-off-by:
-
Jiri Pirko authored
Be symmentrical with create and do the check outside the remove function. Signed-off-by:
-
Jiri Pirko authored
Be symmentrical with create and do the check outside the remove function. Signed-off-by:
-
Jiri Pirko authored
Do it in a same way we do it in spectrum. Check if port is usable first and only in that case create a port instance. Signed-off-by:
-
Elad Raz authored
We recently discovered a bug in the firmware in which a field's length in one of the registers was incorrectly set. This caused the firmware to access garbage data that wasn't initialized by the driver and therefore emit error messages. While the bug is already fixed and the driver usually zeros the buffers passed to the firmware, there are a handful of cases where this isn't done. Zero the buffer in these cases and prevent similar bugs from recurring, as they tend to be hard to debug. Fixes: 52581961 ("mlxsw: core: Implement fan control using hwmon") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: -
Mark Bloch authored
When creating a FWD rule using tc create also a HW counter for this rule. Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org>
-
Mark Bloch authored
Currently the code supports only drop rules to possess counters, add that ability also for fwd rules. Signed-off-by:
-
Mark Bloch authored
Currently when calling mlx5_add_flow_rule we accept only one flow destination, this commit allows to pass multiple destinations. This change forces us to change the return structure to a more flexible one. We introduce a flow handle (struct mlx5_flow_handle), it holds internally the number for rules created and holds an array where each cell points the to a flow rule. From the consumers (of mlx5_add_flow_rule) point of view this change is only cosmetic and requires only to change the type of the returned value they store. From the core point of view, we now need to use a loop when allocating and deleting rules (e.g given to us a flow handler). Signed-off-by:
-
Mark Bloch authored
When adding a new rule, if we can match it with compare_match_value and flow tag we might be able to insert the rule to the same fte. In order to do that, there must be an overlap between the actions of the fte and the new rule. When updating the action of an existing fte, we must tell the firmware we are doing so. Signed-off-by:
-
