- 26 Nov, 2015 21 commits
-
-
Golan Ben-Ami authored
Expose _no_grab prph i/o functions that allow performing i/o outside the transport, without requiring grab and release NIC access for each operation. In addition, rename the functions so they reflect their non-grabbing behavior. This can be very useful for consecutive prph i/o operation that occur outside trans, such as fw dumps. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Eyal Shapira authored
This was an old workaround for solving latency issues with certain Miracast adapters like ActionTec. However this isn't needed anymore and furthermore it hurts throughput in other use cases. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luca Coelho authored
When the netdetect debugfs entry was removed, the nd_config element was accidentally left in the iwl_mvm structure. Remove it. Fixes: dbb04b0d ("iwlwifi: mvm: remove netdetect debugfs entry") Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Moshe Harel authored
As part of the bt_notif file add fields that are currently not represented Signed-off-by: Moshe Harel <moshe.harel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Moshe Harel authored
Add mplut and sync2sco and corunning to debugfs. Signed-off-by: Moshe Harel <moshe.harel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luca Coelho authored
The d0i3 flag in the device configuration structure is redundant, because the same information can be determined by checking the firmware capability flag. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Golan Ben-Ami authored
This will allow to catch different TDLS events and get the firmware data when they occur. Add empty TX_LATENCY trigger on the way to avoid mismatch with trees in which this trigger is implemented. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
The firmware debug trigger ID is always a compile-time constant, so we can use a build-time assertion to validate that it is in fact a valid constant. To make that really guaranteed to work, convert this and the inline function iwl_fw_dbg_trigger_simple_stop() to macros. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
This function updates the pairwise keys as well. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luca Coelho authored
The PCIe transport will also need a d0i3_entry_timeout_ms parameter, so move the existing one from the slave transports to iwlwifi, so it can be reused. While at it, rename the parameter to something shorter, namely d0i3_entry_delay. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
This message isn't very useful and presents a security risk due to the use of %p - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Matti Gottlieb authored
In case of using an external NVM file, the driver sends to the FW the different nvm sections. In the response of the cmd, the FW states the status of the writing of the chunk. Currently the value is not checked by the driver. Check FW's response for writing the nvm chunk in the NVM_ACCESS_CMD. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luca Coelho authored
If the firmware sends LMAC scan notifications while a UMAC scan is running, just WARN and ignore it, otherwise the scanning state gets messed up. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Avri Altman authored
When there's a bt-wifi contention that requires arbitration, we use a priority-based mechanism to decide which comm wins. Over time, use cases become more and more complex, with multiple concurrent active links with different traffic types and different QoS requirements, on both WiFi and BT sides. This, in turn, requires us to elaborate our prioritization mechanism. However, our legacy products included hw that does not supports this, so selectively enable this on specific hw - as signaled by the firmware. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
This code was needed during initial PAN bringup, but now is just cruft - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Avraham Stern authored
Configure the FW to use fragmented scan when the traffic load is high or low latency traffic is on. This is useful for scans that are managed by the FW (e.g. scheduled scan). Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
Make the various conversion functions typesafe, so we don't accidentally try to call them with the wrong pointers and cast them to something that will crash. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
The split of iwlwifi into DVM and MVM was a long time ago now, so we can remove the "default IWLWIFI" that we had to keep all existing .config files with working defaults during the split. This is no longer necessary, practically nobody should now be upgrading a .config that's older than the split. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
802.11ac allows A-MSDU that can be up to 12KB long. Since an entire A-MSDU needs to fit into one single Receive Buffer (RB), add support for big RBs. Since this adds lots of pressure to the memory manager and significantly increase the true_size of the RX buffers, don't enable this by default. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Johannes Berg authored
This is a workaround to an OTP bug. In Series 8000 1x1, the OTP 0xA052 defines 2x2 antenna configuration. This workaround overrides the decision based on HW id and on MIMO disabled bit which is correct in the OTP and set to disabled. This fixes the previous workaround "force 1x1 antenna in Series 8000". Signed-off-by: Moshe Harel <moshe.harel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
-
- 18 Nov, 2015 19 commits
-
-
Kalle Valo authored
mac80211_hwsim was not placed alphabetically correctly in menuconfig, fix that. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Change menuconfig to config to keep the Kconfig entries unified. Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure that it's enabled by default in new configs. Convert menuconfigs to regular configs to unify the wireless drivers menuconfig. Part of reorganising wireless drivers directory and Kconfig. Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is already under if WLAN_VENDOR_TI. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS which we missed to do when earlier moving rtlwifi. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-