- 21 Jul, 2014 23 commits
-
-
Antti Palosaari authored
Move MSi001 driver from staging to drivers/media/tuners/. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Mauro Carvalho Chehab authored
drivers/staging/media/airspy/airspy.c: In function 'airspy_stop_streaming': drivers/staging/media/airspy/airspy.c:569:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Antti Palosaari authored
V4L2_SDR_FMT_CS14LE is complex signed 14-bit sample format, used for software defined radio devices. [m.chehab@samsung.com: remove V4L2_FL_USE_FH_PRIO setting to avoid compilation breakage, as this flag doesn't exist anymore] Signed-off-by:
-
Antti Palosaari authored
V4L2_SDR_FMT_CS14LE - Complex signed 14-bit IQ sample Signed-off-by:
-
Antti Palosaari authored
V4L2_SDR_FMT_CS8 is complex signed 8-bit sample format, used for software defined radio devices. Signed-off-by:
-
Antti Palosaari authored
V4L2_SDR_FMT_CS8 - Complex signed 8-bit IQ sample Signed-off-by:
-
Antti Palosaari authored
AirSpy SDR driver. Thanks to Youssef Touil and Benjamin Vernoux for support, help and hardware! http://airspy.com/Signed-off-by:
-
Antti Palosaari authored
Document V4L2_SDR_FMT_RU12LE format. It is real unsigned 12-bit little endian sample inside 16-bit space. Used by software defined radio devices. Signed-off-by:
-
Antti Palosaari authored
V4L2_SDR_FMT_RU12LE - Real unsigned 12-bit little endian sample inside 16-bit (2 byte). V4L2 FourCC: RU12. Signed-off-by:
-
Sakari Ailus authored
Implement unlocked variants of v4l2_ctrl_s_ctrl() and v4l2_ctrl_s_ctrl_int64(). As drivers need to set controls as they access driver internal state elsewhere than in the control framework unlocked variants of these functions become handy. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sakari Ailus authored
Drivers may use the v4l2_ctrl_modify_range() internally as part of other operations that need to be both serialised using a driver's lock which can also be used to serialise access to the control handler. Provide an unlocked version of the function, __v4l2_ctrl_modify_range() which then may be used by drivers for the purpose. Signed-off-by:
-
Sakari Ailus authored
The v4l2_ctrl_{,un}lock will be needed elsewhere. Define them before the functions that perform operations on controls. Signed-off-by: -
Hans Verkuil authored
Fall-out from the recent struct v4l2_framebuffer change. drivers/media/common/saa7146/saa7146_fops.c: In function ‘saa7146_vv_init’: drivers/media/common/saa7146/saa7146_fops.c:536:6: warning: assignment from incompatible pointer type [enabled by default] fmt = &vv->ov_fb.fmt; ^ Signed-off-by: -
Andrey Utkin authored
[linux-3.16-rc5/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:210]: (style) Checking if unsigned variable 'val' is less than zero. val = get_oneshot_mode(ipipeif->input); if (val < 0) { pr_err("ipipeif: links setup required"); return -EINVAL; } but static int get_oneshot_mode(enum ipipeif_input_entity input) Introduced temporary variable for negativity check. "val" is afterwards used in a lot of bitwise operations, so changing its type to signed is not safe, according to CERT C Secure Coding Standards chapter INT13-C: "Use bitwise operators only on unsigned operands" https://www.securecoding.cert.org/confluence/display/seccode/INT13-C.+Use+bitwise+operators+only+on+unsigned+operands Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80521Reported-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
-
Ian Molton authored
This driver moved over to v4l2_async_unregister_subdev() but still retained a call to v4l2_unregister_subdev(). Remove. Signed-off-by:
Ian Molton <ian.molton@codethink.co.uk> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
-
panpan liu authored
The CPB size is limited by the hardware. Add this limit to the s_fmt. Signed-off-by:
panpan liu <panpan1.liu@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
OVL and BTP IRAM buffers are never used, setup the bits for for DBK/BIT/IP usage depending on CODA version in one place. Also, use a simple allocator function and group IRAM addresses and size in a coda_aux_buf structure. This is done in preparation for CODA960 support. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
This error was introduced by 5677e3b0 "[media] coda: update CODA7541 to firmware 1.4.50". Signed-off-by:
-
Philipp Zabel authored
If bitrate is not set, the encoder is running in VBR mode, with the I- and P-frame quantization parameters configured from userspace. For the quantization parameters, 0 is a valid value. Signed-off-by:
-
Philipp Zabel authored
Previously we'd add one to this value, allocating one additional, superfluous internal buffer. Signed-off-by:
-
Philipp Zabel authored
Currently the rotator unit is used to copy decoded frames out into buffers provided by videobuf2. Since the CODA reports the I/P/B frame type of the last decoded frame, and this frame will be copied out in a later device_run, depending on display order, we have to store the frame type until such time. This patch also adds the B-frame type. Signed-off-by:
-
Jacek Anaszewski authored
fc906b6d "Remove special clock usage in driver" removed initialization of MFC special clock, arguing that there's no need to do it explicitly, since it's one of MFC gate clock's dependencies and gets enabled along with it. However, there's no promise of keeping this hierarchy across Exynos SoC releases, therefore this approach fails to provide a stable, portable solution. Out of all MFC versions, only v6 doesn't use special clock at all. For other versions log a message only in case clk_get fails, as not all the devices with the same MFC version require initializing the clock explicitly. Signed-off-by:
Mateusz Zalega <m.zalega@samsung.com> Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Maurizio Lombardi authored
In the s5p_mfc_alloc_firmware() function there are some mistakes where the code checks whether the DMA memory is properly allocated or not. First of all dma_alloc_coherent() returns NULL in case of error. The code also checked two times fw_virt_addr, ignoring the bank2_virt pointer. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
- 17 Jul, 2014 17 commits
-
-
Dan Carpenter authored
The ZR050_MO_COMP define is cut and pasted twice so we can delete the second instance. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Himangi Saraogi authored
This patch removes the null test on dvb. dvb is initialized at the beginning of the function to &port->dvb. Since port is dereferenced prior to the null test, port must be a valid pointer, and &port->dvb cannot be null. The following Coccinelle script is used for detecting the change: @r@ expression e,f; identifier g,y; statement S1,S2; @@ *e = &f->g <+... f->y ...+> *if (e != NULL || ...) S1 else S2 Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Luke Hart authored
Fix the following warnings reported in radio-bcm2048.c: WARNING: else is not generally useful after a break or return 374: FILE: radio-bcm2048.c:374: + return 0; + } else { WARNING: else is not generally useful after a break or return 728: FILE: radio-bcm2048.c:728: + return BCM2048_DE_EMPHASIS_75us; + else WARNING: unchecked sscanf return value 1974: FILE: radio-bcm2048.c:1974: + sscanf(buf, mask, &value); \ WARNING: Missing a blank line after declarations 2245: FILE: radio-bcm2048.c:2245: + unsigned char tmpbuf[3]; + tmpbuf[i] = bdev->rds_info.radio_text[bdev->rd_index+i+2]; WARNING: Possible unnecessary 'out of memory' message 2601: FILE: radio-bcm2048.c:2601: + if (!bdev) { + dev_dbg(&client->dev, "Failed to alloc video device.\n"); The following error was left since it seems to be a false positive: ERROR: Macros with complex values should be enclosed in parenthesis +#define DEFINE_SYSFS_PROPERTY(prop, signal, size, mask, check) \ +property_write(prop, signal size, mask, check) \ +property_read(prop, size, mask) Signed-off-by:Luke Hart <luke.hart@birchleys.eu> Signed-off-by:
-
Andrey Utkin authored
The issue was discovered by static analysis. It turns out that code is somewhat insane, being if (x) {...} else { if (x) {...} } Edited it to do the only reasonable thing, which is to log the information about the failed call. The most descriptive logging commands set is taken from original code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79801Reported-by:Mike Isely <isely@pobox.com> Signed-off-by:
-
Anil Belur authored
- this patch removes IRQF_DISABLED macro, as this is deprecated/noop. Signed-off-by:
Anil Belur <askb23@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Andrey Utkin authored
Previously, it was needed to reopen device to update GOP size and quantization parameter. Now we update device registers with new values immediately. Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Andrey Utkin authored
solo6*10 boards have configurable quantization parameter which takes values from 0 to 31, inclusively. This change enables setting it with ioctl VIDIOC_S_CTRL with id V4L2_CID_MPEG_VIDEO_H264_MIN_QP. Signed-off-by:
-
Andreas Weber authored
The total number of bits is 16 (12+4). Fix it. Signed-off-by:
Andreas Weber <andy.weber.aw@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_SOLO6X10=y, but CONFIG_BITREVERSE=m: drivers/built-in.o: In function `solo_osd_print': (.text+0x1c7a1f): undefined reference to `byte_rev_table' make: *** [vmlinux] Error 1 Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Hans Verkuil authored
The colorspace for HDTV is REC709, not SMPTE240M. Signed-off-by:
-
Hans Verkuil authored
Add support for Hauppauge model 71100: WinTV-ImpactVCB-e (PCIe, Retail, half height) Signed-off-by:
-
Hans Verkuil authored
Otherwise you cannot get the current clip and bitmap information from an overlay. Signed-off-by:
-
Hans Verkuil authored
If the vidioc_cropcap op is implemented by the driver then the v4l2 core will call that directly. If g_selection is available, then the core cropcap implementation uses g_selection to fill in the bounds and defrect and it sets the pixelaspect to 1x1. But if both are available, then I would like to use g_selection to fill in defrect and bounds before calling cropcap. That way the driver's cropcap implementation doesn't have to set defrect or bounds. Signed-off-by:
-
Hans Verkuil authored
Be sure that the reserved fields are cleared. Signed-off-by:
-
Hans Verkuil authored
The edid field is the last field of the struct, so there is nothing to clear. Signed-off-by:
-
Hans Verkuil authored
Some applications poll a lot, so prevent the poll message from flooding the log. Signed-off-by:
-
Hans Verkuil authored
Add a macro to test if the field consists of a single top or bottom field. Anyone who needs to work with fields as opposed to frame will need this. Signed-off-by:
-
