- 29 Jun, 2010 11 commits
-
-
Tejun Heo authored
Worker management is about to be overhauled. Simplify things by removing cpu_populated_map, creating workers for all possible cpus and making single threaded workqueues behave more like multi threaded ones. After this patch, all cwqs are always initialized, all workqueues are linked on the workqueues list and workers for all possibles cpus always exist. This also makes CPU hotplug support simpler - checking ->cpus_allowed before processing works in worker_thread() and flushing cwqs on CPU_POST_DEAD are enough. While at it, make get_cwq() always return the cwq for the specified cpu, add target_cwq() for cases where single thread distinction is necessary and drop all direct usage of per_cpu_ptr() on wq->cpu_wq. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Strip tracing code from workqueue and remove workqueue tracing. This is temporary measure till concurrency managed workqueue is complete. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com>
-
Tejun Heo authored
Separate out process_one_work() out of run_workqueue(). This patch doesn't cause any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Work flags are about to see more traditional mask handling. Define WORK_STRUCT_*_BIT as the bit position constant and redefine WORK_STRUCT_* as bit masks. Also, make WORK_STRUCT_STATIC_* flags conditional While at it, re-define these constants as enums and use WORK_STRUCT_STATIC instead of hard-coding 2 in WORK_DATA_STATIC_INIT(). Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Currently, __create_workqueue_key() takes @singlethread and @freezeable paramters and store them separately in workqueue_struct. Merge them into a single flags parameter and field and use WQ_FREEZEABLE and WQ_SINGLE_THREAD. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Make the following updates in preparation of concurrency managed workqueue. None of these changes causes any visible behavior difference. * Add comments and adjust indentations to data structures and several functions. * Rename wq_per_cpu() to get_cwq() and swap the position of two parameters for consistency. Convert a direct per_cpu_ptr() access to wq->cpu_wq to get_cwq(). * Add work_static() and Update set_wq_data() such that it sets the flags part to WORK_STRUCT_PENDING | WORK_STRUCT_STATIC if static | @extra_flags. * Move santiy check on work->entry emptiness from queue_work_on() to __queue_work() which all queueing paths share. * Make __queue_work() take @cpu and @wq instead of @cwq. * Restructure flush_work() and __create_workqueue_key() to make them easier to modify. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
With stop_machine() converted to use cpu_stop, RT workqueue doesn't have any user left. Kill RT workqueue support. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
ACPI works need to be executed on cpu0 and acpi/osl.c achieves this by creating singlethread workqueue and then binding it to cpu0 from a work which is quite unorthodox. Make it create regular workqueues and use queue_work_on() instead. This is in preparation of concurrency managed workqueue and the extra workers won't be a problem after it's implemented. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Implement kthread_data() which takes @task pointing to a kthread and returns @data specified when creating the kthread. The caller is responsible for ensuring the validity of @task when calling this function. Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Upcoming workqueue updates will no longer guarantee fixed workqueue to worker kthread association, so giving RT priority to the irq worker won't work. Use kthread_worker which guarantees specific kthread association instead. This also makes setting the priority cleaner. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: ivtv-devel@ivtvdriver.org Cc: linux-media@vger.kernel.org
-
Tejun Heo authored
Implement simple work processor for kthread. This is to ease using kthread. Single thread workqueue used to be used for things like this but workqueue won't guarantee fixed kthread association anymore to enable worker sharing. This can be used in cases where specific kthread association is necessary, for example, when it should have RT priority or be assigned to certain cgroup. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
-
- 13 Jun, 2010 1 commit
-
-
Tejun Heo authored
-
- 12 Jun, 2010 1 commit
-
-
Linus Torvalds authored
-
- 11 Jun, 2010 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
Yinghai Lu authored
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <yannick.roehlly@free.fr> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jiri Slaby authored
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Dan Carpenter authored
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Sage Weil authored
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Shi Weihua authored
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Shi Weihua authored
On btrfs, do the following ------------------ # su user1 # cd btrfs-part/ # touch aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rw- group::rw- other::r-- # su user2 # cd btrfs-part/ # setfacl -m u::rwx aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rwx <- successed to setfacl group::rw- other::r-- ------------------ but we should prohibit it that user2 changing user1's acl. In fact, on ext3 and other fs, a message occurs: setfacl: aaa: Operation not permitted This patch fixed it. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_lookup_dir_item() can return either ERR_PTRs or null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a check for that. It's not clear to me if it can also return NULL pointers or not so I left the original NULL pointer check as is. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
This was added by a22285a6: "Btrfs: Integrate metadata reservation with start_transaction". If we goto out here then we skip all the unwinding and there are locks still held etc. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
Unwind and return -ENOMEM if the allocation fails here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yan, Zheng authored
Tree blocks can live in data block groups in FS converted from extN. So it's easy to trigger the BUG_ON. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yan, Zheng authored
Fix a potential null dereference in relocation.c Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
-
Inaky Perez-Gonzalez authored
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Create output directory in Makefile.modbuiltin kbuild: Generate modules.builtin in make modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid validate_cis failure on CIS override pcmcia: dev_node removal bugfix pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: try to send partial cap release on cap message on missing inode ceph: release cap on import if we don't have the inode ceph: fix misleading/incorrect debug message ceph: fix atomic64_t initialization on ia64 ceph: fix lease revocation when seq doesn't match ceph: fix f_namelen reported by statfs ceph: fix memory leak in statfs ceph: fix d_subdirs ordering problem
-
Miao Xie authored
when we use remap_file_pages() to remap a file, remap_file_pages always return error. It is because btrfs didn't set VM_CAN_NONLINEAR for vma. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-