Change the bgmac driver to allow for phy's defined by the device tree
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean-up the documentation to the bgmac-amac driver, per suggestion by
Rob Herring, and add details for NS2 support.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BCM54810 PHY requires some semi-unique configuration, which results
in some additional configuration in addition to the standard config.
Also, some users of the BCM54810 require the PHY lanes to be swapped.
Since there is no way to detect this, add a device tree query to see if
it is applicable.
Inspired-by: Vikas Soni <vsoni@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the documentation for PHY lane swapping.  This is a boolean entry to
notify the phy device drivers that the TX/RX lanes need to be swapped.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper function to read the AUXCTL register for the BCM54xx.  This
mirrors the bcm54xx_auxctl_write function already present in the code.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joachim Eastwood says:

====================
stmmac: dwmac-sti refactor+cleanup

This patch set aims to remove the init/exit callbacks from the
dwmac-sti driver and instead use standard PM callbacks. Doing this
will also allow us to cleanup the driver.

Eventually the init/exit callbacks will be deprecated and removed
from all drivers dwmac-* except for dwmac-generic. Drivers will be
refactored to use standard PM and remove callbacks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The dev member of struct sti_dwmac is not used anywhere in the driver
so lets just remove it.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename sti_dwmac_init to sti_dwmac_set_mode which is a better
description for what it really does.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add clock error handling to probe and in the process move clock enabling
out of sti_dwmac_init() to make this easier.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sti_dwmac_init() function is called both from probe and resume.
Since DT properties doesn't change between suspend/resume cycles move
parsing of this parameter into sti_dwmac_parse_data() where it belongs.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement PM callbacks and driver remove in the driver instead
of relying on the init/exit hooks in stmmac_platform. This gives
the driver more flexibility in how the code is organized.

Eventually the init/exit callbacks will be deprecated in favor
of the standard PM callbacks and driver remove function.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since sti_dwmac_parse_data() sets dwmac->clk to NULL if not clock was
provided in DT and NULL is a valid clock there is no need to check for
NULL before using this clock.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since dwmac-sti is a DT only driver checking for OF node is not necessary.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-11-04

This series contains updates to ixgbe and ixgbevf only.

Don does cleanup and configuration for our X553 devices, related to LED,
auto-negotiation, flow control and SFP+ setup and config.  Adds the
(not secret) sauce for B0 hardware for X553 hardware.

Emil provides several fixes, first replaces the driver specific MDIO
defines for the more preferred equivalent kernel ones.  Provides a fix
for auto-negotiaion status, by reading a PHY register twice.  Introduces
ixgbe_link_operations structure to allow X550EM_a to override the
methods for MDIO access while X550EM_x provides methods to use I2C
combined access.

Mark fixes an issue where the driver was crashing when msix_entires
were not there because they were freed by a previous suspend or remove.

Sowmini Varadhan fixes an issue where an incorrect check for IPPROTO_UDP
in ixgbe_atr().  Then makes sure that the network and transport headers
in the paged data are available in the headlen bytes to calculate the
l4_proto.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove including <generated/utsrelease.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The msix_entries memory can be freed by a previous suspend or
remove, so don't crash on close when it isn't there. Also only
clear the interrupts when the interface is up, because there
aren't any when it is not up.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

For some Tx paths (e.g., tpacket_snd()), ixgbe_atr may be
passed down an sk_buff that has the network and transport
header in the paged data, so it needs to make sure these
headers are available in the headlen bytes to calculate the
l4_proto.

This patch expect that network and transport headers are
already available in the non-paged header dat.  The assumption
is that the caller has set this up if l4_proto based Tx
steering is desired.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Commit 9f12df90 ("ixgbe: Store VXLAN port number in network order")
incorrectly checks for hdr.ipv4->protocol != IPPROTO_UDP
in ixgbe_atr(). This check should be for "==" instead.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We were using an old Alpha version of the X550 phy ID.  This was leading
to unnecessary queries of the PHY.  I removed the old ID (which shouldn't
be on any HW) and add the two that are.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch add X553 FW ALEF support for B0.  ALEF is the new unified
FW.  This contains updated register defines for ALEF speed
configuration.  Likewise it also removes the AN_CNTL_8 usage from
the native SFI flow as it is no longer supported by FW.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix an issue where set_phy_power was NULL for X550 copper devices
because get_invariants was called before hw->device_id was set.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Introduce ixgbe_link_operations struct with the following changes:

	read_i2c_combined		=> read_link
	read_i2c_combined_unlocked	=> read_link_unlocked
	write_i2c_combined		=> write_link
	write_i2c_combined_unlocked	=> write_link_unlocked

This will allow X550EM_a to override these methods for MDIO access
while X550EM_x provides methods to use I2C combined access. This
also adds a new structure, ixgbe_link_info, to hold information
about the link. Initially this is just method pointers and a bus
address.

The functions involved in combined I2C accesses were moved from
ixgbe_phy.c to ixgbe_x550.c. The underlying functions that carry
out the combined I2C accesses were left in ixgbe_phy.c because
they share some functions with other I2C methods.

v2 - set hw->link.ops in probe.
v3 - check ii->link_ops before setting it since we don't have it
for all devices.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove SFP ixfi code since there is no HW that currently supports it.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The msix_entries memory can be freed by a previous suspend or
remove, so don't crash on close when it isn't there.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds X553 flow control auto negotiation for fiber and
backplain.  To enable this new function pointers were added as well
as creating a function to dynamically set function pointer we can't
define only on MAC type.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Read the PHY register twice in order to get the correct value for
autoneg_status.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Replace some ixgbe specific MDIO defines with their equivalent
from the kernel.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch updates ixgbe_setup_phy_link_generic to set/unset
auto-negotiation for all speeds. This ensures that unsupported
speeds are unset. This is necessary since the PHY NVM may
advertise unsupported speeds.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds support to get the LED link active via the LEDCTL
register.  If the LEDCTL register does not have LED link active
(LED mode field = 0x0100) set then default LED link active returned.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

X553 doesn't need all the initialization that X552 did for iXFI. This
patch will allow native SPI SFP+ to work with X553 devices.  Future
patches will add additional configuration as needed.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Jakub Kicinski says:

====================
ring reconfiguration and XDP support

This set adds support for ethtool channel API and XDP.

I kick off with ethtool get_channels() implementation.
set_channels() needs some preparations to get right.  I follow
the prepare/commit paradigm and allocate all resources before
stopping the device.  It has already been done for ndo_change_mtu
and ethtool set_ringparam(), it makes sense now to consolidate all
the required logic in one place.

XDP support requires splitting TX rings into two classes -
for the stack and for XDP.  The ring structures are identical.
The differences are in how they are connected to IRQ vector
structs and how the completion/cleanup works.  When XDP is enabled
I switch from the frag allocator to page-per-packet and map buffers
BIDIRECTIONALly.

Last but not least XDP offload is added (the patch just takes
care of the small formal differences between cls_bpf and XDP).

There is a tiny & trivial DebugFS patch in the mix, I hope it can
be taken via net-next provided we have the right Acks.

Resending with improved commit message and CCing more people on patch 10.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Most infrastructure can be reused, provide separate handling
of context offsets and exit codes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp_net_bpf_offload() takes all .setup_tc() parameters but it
doesn't use them at the moment.  Remove unnecessary ones to make
it possible for XDP to reuse this function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add XDP support.  Separate stack's and XDP's TX rings logically.
Add functions for handling XDP_TX and cleanup of XDP's TX rings.
For XDP allocate all RX buffers as separate pages and map them
with DMA_BIDIRECTIONAL.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

seq_file users can only access const version of file pointer,
because the ->file member of struct seq_operations is marked
as such.  Make parameter to debugfs_real_fops() const.

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Nicolai Stange <nicstange@gmail.com>
CC: Christian Lamparter <chunkeey@gmail.com>
CC: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calculate packet offsets early in nfp_net_rx() so that we will be
able to use them in upcoming XDP handler.  While at it move relevant
variables into the loop scope.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow changing the number of rings via ethtool .set_channels API.
Runtime reconfig needs to be extended to handle number of rings.
We need to be able to activate interrupt vectors before rings are
assigned to them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will need to rerun the initialization of the RSS indirection table
after the number of rings is changed.  Move the code to a separate
function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of fixing ring -> vector relations up in ring swap functions
put the reassignment into a helper function which will reinit all
links.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Upcoming XDP support will break the assumption that one can iterate
over IRQ vectors to get to all the rings easily.  Use nn->.x_ring
arrays directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>