Pull regulator updates from Mark Brown:
 "This is a fairly small release for the regulator API, there's quite a
  few new devices supported and some important improvements around
  coupled regulators in the core but mostly just small fixes and
  improvements otherwise.

  Summary:

   - Fixes and cleanups around the handling of coupled regulators.

   - A special driver for some Raspberry Pi panels with some unusually
     custom stuff around them.

   - Support for Qualcomm PM660/PM660L, PM8950 and PM8953, Richtek
     RT4801 and RTMV20, Rohm BD9576MUF and BD9573MUF"

* tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (89 commits)
  regulator: bd9576: Fix print
  regulator: bd9576: fix regulator binfdings dt node names
  dt-bindings: regulator: document pm8950 and pm8953 smd regulators
  regulator: qcom_smd: add pm8953 regulators
  regulator: Make constraint debug processing conditional on DEBUG
  regulator: qcom: labibb: Constify static structs
  regulator: dt-bindings: Document the PM660/PM660L PMICs entries
  regulator: qcom_smd: Add PM660/PM660L regulator support
  regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries
  regulator: qcom_spmi: Add PM660/PM660L regulators
  regulator: qcom_spmi: Add support for new regulator types
  regulator: core: Enlarge max OF property name length to 64 chars
  regulator: tps65910: use regmap accessors
  regulator: rtmv20: Add missing regcache cache only before marked as dirty
  regulator: rtmv20: Update DT binding document and property name parsing
  regulator: rtmv20: Add DT-binding document for Richtek RTMV20
  regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator
  regulator: resolve supply after creating regulator
  regulator: print symbolic errors in kernel messages
  regulator: print state at boot
  ...

Pull regmap updates from Mark Brown:
 "Quite a busy release for regmap, mostly support for new features
  useful on fairly small subsets of devices. The user visible features
  are:

   - A new API for registering large numbers of regmap fields at once.

   - Support for Intel AVMM buses connected via SPI.

   - Support for 12/20 address/value layouts.

   - Support for yet another scheme for acknowledging interrupts used on
     some Qualcomm devices"

* tag 'regmap-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: Add support to clear ack registers
  regmap: add support to regmap_field_bulk_alloc/free apis
  regmap: destroy mutex (if used) in regmap_exit()
  regmap: debugfs: use semicolons rather than commas to separate statements
  regmap: debugfs: Fix more error path regressions
  regmap: Add support for 12/20 register formatting
  regmap: Add can_sleep configuration option
  regmap: soundwire: remove unused header mod_devicetable.h
  regmap: Use flexible sleep
  regmap: add Intel SPI Slave to AVMM Bus Bridge support

Pull media updates from Mauro Carvalho Chehab:

 - the usbvision driver was dropped from staging

 - the Zoran driver were re-added at staging. It gained lots of
   improvements, and was converted to use videobuf2 API

 - a new virtual driver (vidtv) was added in order to allow testing the
   digital TV framework and APIs

 - the media uAPI documentation gained a glossary with commonly used
   terms, helping to simplify some parts of the docs

 - more cleanups at the atomisp driver

 - Mediatek VPU gained support for MT8183

 - added support for codecs with supports doing colorspace conversion
   (CSC)

 - support for CSC API was added at vivid and rksip1 drivers

 - added a helper core support and uAPI for better supporting H.264
   codecs

 - added support for Renesas R8A774E1

 - use the new SPDX GFDL-1.1-no-invariants-or-later license on media
   uAPI docs, instead of a license text

 - Venus driver has gained VP9 codec support

 - lots of other cleanups and driver improvements

* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
  media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
  media: tvp7002: fix uninitialized variable warning
  media: s5k5baf: drop 'data' field in struct s5k5baf_fw
  media: dt-bindings: media: venus: Add an optional power domain for perf voting
  media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
  media: staging: rkisp1: uapi: Do not use BIT() macro
  media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
  media: usbtv: Fix refcounting mixup
  media: zoran.rst: place it at the right place this time
  media: add Zoran cardlist
  media: admin-guide: update cardlists
  media: siano: rename a duplicated card string
  media: zoran: move documentation file to the right place
  media: atomisp: fixes build breakage for ISP2400 due to a cleanup
  media: zoran: fix mixed case on vars
  media: zoran: get rid of an unused var
  media: zoran: use upper case for card types
  media: zoran: fix sparse warnings
  media: zoran: fix smatch warning
  media: zoran: update TODO
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Export SDIO revision and info strings to userspace
   - Add support for specifying mmc/mmcblk index via mmc aliases in DT

 MMC host:
   - Enable support for async probe for all mmc host drivers
   - Enable compile testing of multiple host drivers
   - dw_mmc: Enable the Synopsys DesignWare driver for RISCV and CSKY
   - mtk-sd: Fixup support for CQHCI
   - owl-mmc: Add support for the actions,s700-mmc variant
   - renesas_sdhi: Fix regression (temporary) for re-insertion of SD cards
   - renesas_sdhi: Add support for the r8a774e1 variant
   - renesas_sdhi/tmio: Improvements for tunings
   - renesas_sdhi/tmio: Rework support for reset of controller
   - sdhci-acpi: Fix HS400 tuning for devices with invalid presets on AMDI0040
   - sdhci_am654: Improve support for tunings
   - sdhci_am654: Add support for input tap delays
   - sdhci_am654: Add workaround for card detect debounce timer
   - sdhci-am654: Add support for the TI's J7200 variants
   - sdhci-esdhc-imx: Fix support for manual tuning
   - sdhci-iproc: Enable support for eMMC DDR 3.3V for bcm2711
   - sdhci-msm: Fix stability issues with HS400 for sc7180
   - sdhci-of-sparx5: Add Sparx5 SoC eMMC driver
   - sdhci-of-esdhc: Fixup reference clock source selection
   - sdhci-pci: Add LTR support for some Intel BYT controllers
   - sdhci-pci-gli: Add CQHCI Support for GL9763E"

* tag 'mmc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
  mmc: sdhci_am654: Fix module autoload
  mmc: renesas_sdhi: workaround a regression when reinserting SD cards
  mmc: sdhci-pci-gli: Add CQHCI Support for GL9763E
  mmc: sdhci-acpi: AMDI0040: Set SDHCI_QUIRK2_PRESET_VALUE_BROKEN
  mmc: sdhci_am654: Enable tuning for SDR50
  mmc: sdhci_am654: Add support for software tuning
  mmc: sdhci_am654: Add support for input tap delay
  mmc: sdhci_am654: Fix hard coded otap delay array size
  dt-bindings: mmc: sdhci-am654: Add documentation for input tap delay
  dt-bindings: mmc: sdhci-am654: Convert sdhci-am654 controller documentation to json schema
  mmc: sdhci-of-esdhc: fix reference clock source selection
  mmc: host: fix depends for MMC_MESON_GX w/ COMPILE_TEST
  mmc: sdhci-s3c: hide forward declaration of of_device_id behind CONFIG_OF
  mmc: sdhci: fix indentation mistakes
  mmc: moxart: remove unneeded check for drvdata
  mmc: renesas_sdhi: drop local flag for tuning
  mmc: rtsx_usb_sdmmc: simplify the return expression of sd_change_phase()
  mmc: core: document mmc_hw_reset()
  mmc: mediatek: Drop pointer to mmc_host from msdc_host
  dt-bindings: mmc: owl: add compatible string actions,s700-mmc
  ...

Pull erofs updates from Gao Xiang:
 "This cycle addresses a reported permission issue with overlay due to a
  duplicated permission check for "trusted." xattrs. Also, a REQ_RAHEAD
  flag is added now to all readahead requests in order to trace
  readahead I/Os. The others are random cleanups.

  All commits have been tested and have been in linux-next as well.

  Summary:

   - fix an issue which can cause overlay permission problem due to
     duplicated permission check for "trusted." xattrs;

   - add REQ_RAHEAD flag to readahead requests for blktrace;

   - several random cleanup"

* tag 'erofs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: remove unnecessary enum entries
  erofs: add REQ_RAHEAD flag to readahead requests
  erofs: fold in should_decompress_synchronously()
  erofs: avoid unnecessary variable `err'
  erofs: remove unneeded parameter
  erofs: avoid duplicated permission check for "trusted." xattrs

Pull btrfs updates from David Sterba:
 "Mostly core updates with a few user visible bits and fixes.

  Hilights:

   - fsync performance improvements
      - less contention of log mutex (throughput +4%, latency -14%,
        dbench with 32 clients)
      - skip unnecessary commits for link and rename (throughput +6%,
        latency -30%, rename latency -75%, dbench with 16 clients)
      - make fast fsync wait only for writeback (throughput +10..40%,
        runtime -1..-20%, dbench with 1 to 64 clients on various
        file/block sizes)

   - direct io is now implemented using the iomap infrastructure, that's
     the main part, we still have a workaround that requires an iomap
     API update, coming in 5.10

   - new sysfs exports:
      - information about the exclusive filesystem operation status
        (balance, device add/remove/replace, ...)
      - supported send stream version

  Core:

   - use ticket space reservations for data, fair policy using the same
     infrastructure as metadata

   - preparatory work to switch locking from our custom tree locks to
     standard rwsem, now the locking context is propagated to all
     callers, actual switch is expected to happen in the next dev cycle

   - seed device structures are now using list API

   - extent tracepoints print proper tree id

   - unified range checks for extent buffer helpers

   - send: avoid using temporary buffer for copying data

   - remove unnecessary RCU protection from space infos

   - remove unused readpage callback for metadata, enabling several
     cleanups

   - replace indirect function calls for end io hooks and remove
     extent_io_ops completely

  Fixes:

   - more lockdep warning fixes

   - fix qgroup reservation for delayed inode and an occasional
     reservation leak for preallocated files

   - fix device replace of a seed device

   - fix metadata reservation for fallocate that leads to transaction
     aborts

   - reschedule if necessary when logging directory items or when
     cloning lots of extents

   - tree-checker: fix false alert caused by legacy btrfs root item

   - send: fix rename/link conflicts for orphanized inodes

   - properly initialize device stats for seed devices

   - skip devices without magic signature when mounting

  Other:

   - error handling improvements, BUG_ONs replaced by proper handling,
     fuzz fixes

   - various function parameter cleanups

   - various W=1 cleanups

   - error/info messages improved

  Mishaps:

   - commit 62cf5391 ("btrfs: move btrfs_rm_dev_replace_free_srcdev
     outside of all locks") is a rebase leftover after the patch got
     merged to 5.9-rc8 as a466c85e ("btrfs: move
     btrfs_rm_dev_replace_free_srcdev outside of all locks"), the
     remaining part is trivial and the patch is in the middle of the
     series so I'm keeping it there instead of rebasing"

* tag 'for-5.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (161 commits)
  btrfs: rename BTRFS_INODE_ORDERED_DATA_CLOSE flag
  btrfs: annotate device name rcu_string with __rcu
  btrfs: skip devices without magic signature when mounting
  btrfs: cleanup cow block on error
  btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
  fs: remove no longer used dio_end_io()
  btrfs: return error if we're unable to read device stats
  btrfs: init device stats for seed devices
  btrfs: remove struct extent_io_ops
  btrfs: call submit_bio_hook directly for metadata pages
  btrfs: stop calling submit_bio_hook for data inodes
  btrfs: don't opencode is_data_inode in end_bio_extent_readpage
  btrfs: call submit_bio_hook directly in submit_one_bio
  btrfs: remove extent_io_ops::readpage_end_io_hook
  btrfs: replace readpage_end_io_hook with direct calls
  btrfs: send, recompute reference path after orphanization of a directory
  btrfs: send, orphanize first all conflicting inodes when processing references
  btrfs: tree-checker: fix false alert caused by legacy btrfs root item
  btrfs: use unaligned helpers for stack and header set/get helpers
  btrfs: free-space-cache: use unaligned helpers to access data
  ...

Pull dlm updates from David Teigland:
 "This set continues the ongoing rework of the low level communication
  layer in the dlm.

  The focus here is on improvements to connection handling, and
  reworking the receiving of messages"

* tag 'dlm-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: fix race in nodeid2con
  fs: dlm: rework receive handling
  fs: dlm: disallow buffer size below default
  fs: dlm: handle range check as callback
  fs: dlm: fix mark per nodeid setting
  fs: dlm: remove lock dependency warning
  fs: dlm: use free_con to free connection
  fs: dlm: handle possible othercon writequeues
  fs: dlm: move free writequeue into con free
  fs: dlm: fix configfs memory leak
  fs: dlm: fix dlm_local_addr memory leak
  fs: dlm: make connection hash lockless
  fs: dlm: synchronize dlm before shutdown

Pull fscrypt updates from Eric Biggers:
 "This release, we rework the implementation of creating new encrypted
  files in order to fix some deadlocks and prepare for adding fscrypt
  support to CephFS, which Jeff Layton is working on.

  We also export a symbol in preparation for the above-mentioned CephFS
  support and also for ext4/f2fs encrypt+casefold support.

  Finally, there are a few other small cleanups.

  As usual, all these patches have been in linux-next with no reported
  issues, and I've tested them with xfstests"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: export fscrypt_d_revalidate()
  fscrypt: rename DCACHE_ENCRYPTED_NAME to DCACHE_NOKEY_NAME
  fscrypt: don't call no-key names "ciphertext names"
  fscrypt: use sha256() instead of open coding
  fscrypt: make fscrypt_set_test_dummy_encryption() take a 'const char *'
  fscrypt: handle test_dummy_encryption in more logical way
  fscrypt: move fscrypt_prepare_symlink() out-of-line
  fscrypt: make "#define fscrypt_policy" user-only
  fscrypt: stop pretending that key setup is nofs-safe
  fscrypt: require that fscrypt_encrypt_symlink() already has key
  fscrypt: remove fscrypt_inherit_context()
  fscrypt: adjust logging for in-creation inodes
  ubifs: use fscrypt_prepare_new_inode() and fscrypt_set_context()
  f2fs: use fscrypt_prepare_new_inode() and fscrypt_set_context()
  ext4: use fscrypt_prepare_new_inode() and fscrypt_set_context()
  ext4: factor out ext4_xattr_credits_for_new_inode()
  fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()
  fscrypt: restrict IV_INO_LBLK_32 to ino_bits <= 32
  fscrypt: drop unused inode argument from fscrypt_fname_alloc_buffer

Pull crypto updates from Herbert Xu:
 "API:
   - Allow DRBG testing through user-space af_alg
   - Add tcrypt speed testing support for keyed hashes
   - Add type-safe init/exit hooks for ahash

  Algorithms:
   - Mark arc4 as obsolete and pending for future removal
   - Mark anubis, khazad, sead and tea as obsolete
   - Improve boot-time xor benchmark
   - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity

  Drivers:
   - Fixes and enhancement for XTS in caam
   - Add support for XIP8001B hwrng in xiphera-trng
   - Add RNG and hash support in sun8i-ce/sun8i-ss
   - Allow imx-rngc to be used by kernel entropy pool
   - Use crypto engine in omap-sham
   - Add support for Ingenic X1830 with ingenic"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
  X.509: Fix modular build of public_key_sm2
  crypto: xor - Remove unused variable count in do_xor_speed
  X.509: fix error return value on the failed path
  crypto: bcm - Verify GCM/CCM key length in setkey
  crypto: qat - drop input parameter from adf_enable_aer()
  crypto: qat - fix function parameters descriptions
  crypto: atmel-tdes - use semicolons rather than commas to separate statements
  crypto: drivers - use semicolons rather than commas to separate statements
  hwrng: mxc-rnga - use semicolons rather than commas to separate statements
  hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
  hwrng: stm32 - use semicolons rather than commas to separate statements
  crypto: xor - use ktime for template benchmarking
  crypto: xor - defer load time benchmark to a later time
  crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
  crypto: hisilicon/zip - fix the return value when device is busy
  crypto: hisilicon/zip - fix zero length input in GZIP decompress
  crypto: hisilicon/zip - fix the uncleared debug registers
  lib/mpi: Fix unused variable warnings
  crypto: x86/poly1305 - Remove assignments with no effect
  hwrng: npcm - modify readl to readb
  ...

Clang-11 shipped support for outputs to asm goto statments along the
fallthrough path.  Double up some of the get_user() and related macros
to be able to take advantage of this extended GNU C extension. This
should help improve the generated code's performance for these accesses.

Cc: Bill Wendling <morbo@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of inlining the stac/mov/clac sequence (which also requires
individual exception table entries and several asm instruction
alternatives entries), just generate "call __put_user_nocheck_X" for the
__put_user() cases, the same way we changed __get_user earlier.

Unlike the get_user() case, we didn't have the same nice infrastructure
to just generate the call with a single case, so this actually has to
change some of the infrastructure in order to do this.  But that only
cleans up the code further.

So now, instead of using a case statement for the sizes, we just do the
same thing we've done on the get_user() side for a long time: use the
size as an immediate constant to the asm, and generate the asm that way
directly.

In order to handle the special case of 64-bit data on a 32-bit kernel, I
needed to change the calling convention slightly: the data is passed in
%eax[:%edx], the pointer in %ecx, and the return value is also returned
in %ecx.  It used to be returned in %eax, but because of how %eax can
now be a double register input, we don't want mix that with a
single-register output.

The actual low-level asm is easier to handle: we'll just share the code
between the checking and non-checking case, with the non-checking case
jumping into the middle of the function.  That may sound a bit too
special, but this code is all very very special anyway, so...

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of inlining the whole stac/lfence/mov/clac sequence (which also
requires individual exception table entries and several asm instruction
alternatives entries), just generate "call __get_user_nocheck_X" for the
__get_user() cases.

We can use all the same infrastructure that we already do for the
regular "get_user()", and the end result is simpler source code, and
much simpler code generation.

It also means that when I introduce asm goto with input for
"unsafe_get_user()", there are no nasty interactions with the
__get_user() code.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull file locking fix from Jeff Layton:
 "Just a single patch to fix up some tracepoint output"

* tag 'locks-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: Remove extra "0x" in tracepoint format specifier

Pull compat mount cleanups from Al Viro:
 "The last remnants of mount(2) compat buried by Christoph.

  Buried into NFS, that is.

  Generally I'm less enthusiastic about "let's use in_compat_syscall()
  deep in call chain" kind of approach than Christoph seems to be, but
  in this case it's warranted - that had been an NFS-specific wart,
  hopefully not to be repeated in any other filesystems (read: any new
  filesystem introducing non-text mount options will get NAKed even if
  it doesn't mess the layout up).

  IOW, not worth trying to grow an infrastructure that would avoid that
  use of in_compat_syscall()..."

* 'compat.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: remove compat_sys_mount
  fs,nfs: lift compat nfs4 mount data handling into the nfs code
  nfs: simplify nfs4_parse_monolithic

Pull compat quotactl cleanups from Al Viro:
 "More Christoph's compat cleanups: quotactl(2)"

* 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  quota: simplify the quotactl compat handling
  compat: add a compat_need_64bit_alignment_fixup() helper
  compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>

Pull compat iovec cleanups from Al Viro:
 "Christoph's series around import_iovec() and compat variant thereof"

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  security/keys: remove compat_keyctl_instantiate_key_iov
  mm: remove compat_process_vm_{readv,writev}
  fs: remove compat_sys_vmsplice
  fs: remove the compat readv/writev syscalls
  fs: remove various compat readv/writev helpers
  iov_iter: transparently handle compat iovecs in import_iovec
  iov_iter: refactor rw_copy_check_uvector and import_iovec
  iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
  compat.h: fix a spelling error in <linux/compat.h>

Pull copy_and_csum cleanups from Al Viro:
 "Saner calling conventions for csum_and_copy_..._user() and friends"

[ Removing 800+ lines of code and cleaning stuff up is good  - Linus ]

* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ppc: propagate the calling conventions change down to csum_partial_copy_generic()
  amd64: switch csum_partial_copy_generic() to new calling conventions
  sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
  xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
  mips: propagate the calling convention change down into __csum_partial_copy_..._user()
  mips: __csum_partial_copy_kernel() has no users left
  mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
  sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
  i386: propagate the calling conventions change down to csum_partial_copy_generic()
  sh: propage the calling conventions change down to csum_partial_copy_generic()
  m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
  arm: propagate the calling convention changes down to csum_partial_copy_from_user()
  alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
  saner calling conventions for csum_and_copy_..._user()
  csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
  csum_partial_copy_nocheck(): drop the last argument
  unify generic instances of csum_partial_copy_nocheck()
  icmp_push_reply(): reorder adding the checksum up
  skb_copy_and_csum_bits(): don't bother with the last argument

Pull documentation updates from Jonathan Corbet:
 "As hoped, things calmed down for docs this cycle; fewer changes and
  almost no conflicts at all. This includes:

   - A reworked and expanded user-mode Linux document

   - Some simplifications and improvements for submitting-patches.rst

   - An emergency fix for (some) problems with Sphinx 3.x

   - Some welcome automarkup improvements to automatically generate
     cross-references to struct definitions and other documents

   - The usual collection of translation updates, typo fixes, etc"

* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
  gpiolib: Update indentation in driver.rst for code excerpts
  Documentation/admin-guide: tainted-kernels: Fix typo occured
  Documentation: better locations for sysfs-pci, sysfs-tagging
  docs: programming-languages: refresh blurb on clang support
  Documentation: kvm: fix a typo
  Documentation: Chinese translation of Documentation/arm64/amu.rst
  doc: zh_CN: index files in arm64 subdirectory
  mailmap: add entry for <mstarovoitov@marvell.com>
  doc: seq_file: clarify role of *pos in ->next()
  docs: trace: ring-buffer-design.rst: use the new SPDX tag
  Documentation: kernel-parameters: clarify "module." parameters
  Fix references to nommu-mmap.rst
  docs: rewrite admin-guide/sysctl/abi.rst
  docs: fb: Remove vesafb scrollback boot option
  docs: fb: Remove sstfb scrollback boot option
  docs: fb: Remove matroxfb scrollback boot option
  docs: fb: Remove framebuffer scrollback boot option
  docs: replace the old User Mode Linux HowTo with a new one
  Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
  Documentation/admin-guide: README & svga: remove use of "rdev"
  ...

Pull ia64 updates from Tony Luck:
 "Cleanups by Christoph:

   - Switch to libata instead of legacy ide driver

   - Drop ia64 perfmon (it's been broken for a while)"

* tag 'ia64_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: Use libata instead of the legacy ide driver in defconfigs
  ia64: Remove perfmon

Pull x86 Hyper-V update from Ingo Molnar:
 "A single commit harmonizing the x86 and ARM64 Hyper-V constants
  namespace"

* tag 'x86-hyperv-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyperv: Remove aliases with X64 in their name

Pull x86 paravirt cleanup from Ingo Molnar:
 "Clean up the paravirt code after the removal of 32-bit Xen PV support"

* tag 'x86-paravirt-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Avoid needless paravirt step clearing page table entries
  x86/paravirt: Remove set_pte_at() pv-op
  x86/entry/32: Simplify CONFIG_XEN_PV build dependency
  x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT
  x86/paravirt: Clean up paravirt macros
  x86/paravirt: Remove 32-bit support from CONFIG_PARAVIRT_XXL

Pull x86 build update from Ingo Molnar:
 "Remove a couple of ancient and distracting printouts from the x86
  build, such as the CRC sum or limited size data - most of which can be
  gained via tools"

* tag 'x86-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Declutter the build output

Pull x86 mm updates from Ingo Molnar:
 "Do not sync vmalloc/ioremap mappings on x86-64 kernels.

  Hopefully now without the bugs!"

* tag 'x86-mm-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/64: Update comment in preallocate_vmalloc_pages()
  x86/mm/64: Do not sync vmalloc/ioremap mappings

Pull x86 kaslr updates from Ingo Molnar:
 "This cleans up and simplifies the x86 KASLR code, and also fixes some
  corner case bugs"

* tag 'x86-kaslr-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/kaslr: Replace strlen() with strnlen()
  x86/kaslr: Add a check that the random address is in range
  x86/kaslr: Make local variables 64-bit
  x86/kaslr: Replace 'unsigned long long' with 'u64'
  x86/kaslr: Make minimum/image_size 'unsigned long'
  x86/kaslr: Small cleanup of find_random_phys_addr()
  x86/kaslr: Drop unnecessary alignment in find_random_virt_addr()
  x86/kaslr: Drop redundant check in store_slot_info()
  x86/kaslr: Make the type of number of slots/slot areas consistent
  x86/kaslr: Drop test for command-line parameters before parsing
  x86/kaslr: Simplify process_gb_huge_pages()
  x86/kaslr: Short-circuit gb_huge_pages on x86-32
  x86/kaslr: Fix off-by-one error in process_gb_huge_pages()
  x86/kaslr: Drop some redundant checks from __process_mem_region()
  x86/kaslr: Drop redundant variable in __process_mem_region()
  x86/kaslr: Eliminate 'start_orig' local variable from __process_mem_region()
  x86/kaslr: Drop redundant cur_entry from __process_mem_region()
  x86/kaslr: Fix off-by-one error in __process_mem_region()
  x86/kaslr: Initialize mem_limit to the real maximum address
  x86/kaslr: Fix process_efi_entries comment
  ...

Pull perf/kprobes updates from Ingo Molnar:
 "This prepares to unify the kretprobe trampoline handler and make
  kretprobe lockless (those patches are still work in progress)"

* tag 'perf-kprobes-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
  kprobes: Make local functions static
  kprobes: Free kretprobe_instance with RCU callback
  kprobes: Remove NMI context check
  sparc: kprobes: Use generic kretprobe trampoline handler
  sh: kprobes: Use generic kretprobe trampoline handler
  s390: kprobes: Use generic kretprobe trampoline handler
  powerpc: kprobes: Use generic kretprobe trampoline handler
  parisc: kprobes: Use generic kretprobe trampoline handler
  mips: kprobes: Use generic kretprobe trampoline handler
  ia64: kprobes: Use generic kretprobe trampoline handler
  csky: kprobes: Use generic kretprobe trampoline handler
  arc: kprobes: Use generic kretprobe trampoline handler
  arm64: kprobes: Use generic kretprobe trampoline handler
  arm: kprobes: Use generic kretprobe trampoline handler
  x86/kprobes: Use generic kretprobe trampoline handler
  kprobes: Add generic kretprobe trampoline handler

Pull performance events updates from Ingo Molnar:
 "x86 Intel updates:

   - Add Jasper Lake support

   - Add support for TopDown metrics on Ice Lake

   - Fix Ice Lake & Tiger Lake uncore support, add Snow Ridge support

   - Add a PCI sub driver to support uncore PMUs where the PCI resources
     have been claimed already - extending the range of supported
     systems.

  x86 AMD updates:

   - Restore 'perf stat -a' behaviour to program the uncore PMU to count
     all CPU threads.

   - Fix setting the proper count when sampling Large Increment per
     Cycle events / 'paired' events.

   - Fix IBS Fetch sampling on F17h and some other IBS fine tuning,
     greatly reducing the number of interrupts when large sample periods
     are specified.

   - Extends Family 17h RAPL support to also work on compatible F19h
     machines.

  Core code updates:

   - Fix race in perf_mmap_close()

   - Add PERF_EV_CAP_SIBLING, to denote that sibling events should be
     closed if the leader is removed.

   - Smaller fixes and updates"

* tag 'perf-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  perf/core: Fix race in the perf_mmap_close() function
  perf/x86: Fix n_metric for cancelled txn
  perf/x86: Fix n_pair for cancelled txn
  x86/events/amd/iommu: Fix sizeof mismatch
  perf/x86/intel: Check perf metrics feature for each CPU
  perf/x86/intel: Fix Ice Lake event constraint table
  perf/x86/intel/uncore: Fix the scale of the IMC free-running events
  perf/x86/intel/uncore: Fix for iio mapping on Skylake Server
  perf/x86/msr: Add Jasper Lake support
  perf/x86/intel: Add Jasper Lake support
  perf/x86/intel/uncore: Reduce the number of CBOX counters
  perf/x86/intel/uncore: Update Ice Lake uncore units
  perf/x86/intel/uncore: Split the Ice Lake and Tiger Lake MSR uncore support
  perf/x86/intel/uncore: Support PCIe3 unit on Snow Ridge
  perf/x86/intel/uncore: Generic support for the PCI sub driver
  perf/x86/intel/uncore: Factor out uncore_pci_pmu_unregister()
  perf/x86/intel/uncore: Factor out uncore_pci_pmu_register()
  perf/x86/intel/uncore: Factor out uncore_pci_find_dev_pmu()
  perf/x86/intel/uncore: Factor out uncore_pci_get_dev_die_info()
  perf/amd/uncore: Inform the user how many counters each uncore PMU has
  ...

Pull static call support from Ingo Molnar:
 "This introduces static_call(), which is the idea of static_branch()
  applied to indirect function calls. Remove a data load (indirection)
  by modifying the text.

  They give the flexibility of function pointers, but with better
  performance. (This is especially important for cases where retpolines
  would otherwise be used, as retpolines can be pretty slow.)

  API overview:

      DECLARE_STATIC_CALL(name, func);
      DEFINE_STATIC_CALL(name, func);
      DEFINE_STATIC_CALL_NULL(name, typename);

      static_call(name)(args...);
      static_call_cond(name)(args...);
      static_call_update(name, func);

  x86 is supported via text patching, otherwise basic indirect calls are
  used, with function pointers.

  There's a second variant using inline code patching, inspired by
  jump-labels, implemented on x86 as well.

  The new APIs are utilized in the x86 perf code, a heavy user of
  function pointers, where static calls speed up the PMU handler by
  4.2% (!).

  The generic implementation is not really excercised on other
  architectures, outside of the trivial test_static_call_init()
  self-test"

* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  static_call: Fix return type of static_call_init
  tracepoint: Fix out of sync data passing by static caller
  tracepoint: Fix overly long tracepoint names
  x86/perf, static_call: Optimize x86_pmu methods
  tracepoint: Optimize using static_call()
  static_call: Allow early init
  static_call: Add some validation
  static_call: Handle tail-calls
  static_call: Add static_call_cond()
  x86/alternatives: Teach text_poke_bp() to emulate RET
  static_call: Add simple self-test for static calls
  x86/static_call: Add inline static call implementation for x86-64
  x86/static_call: Add out-of-line static call implementation
  static_call: Avoid kprobes on inline static_call()s
  static_call: Add inline static call infrastructure
  static_call: Add basic static call infrastructure
  compiler.h: Make __ADDRESSABLE() symbol truly unique
  jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
  module: Properly propagate MODULE_STATE_COMING failure
  module: Fix up module_notifier return values
  ...

Pull orphan section checking from Ingo Molnar:
 "Orphan link sections were a long-standing source of obscure bugs,
  because the heuristics that various linkers & compilers use to handle
  them (include these bits into the output image vs discarding them
  silently) are both highly idiosyncratic and also version dependent.

  Instead of this historically problematic mess, this tree by Kees Cook
  (et al) adds build time asserts and build time warnings if there's any
  orphan section in the kernel or if a section is not sized as expected.

  And because we relied on so many silent assumptions in this area, fix
  a metric ton of dependencies and some outright bugs related to this,
  before we can finally enable the checks on the x86, ARM and ARM64
  platforms"

* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/boot/compressed: Warn on orphan section placement
  x86/build: Warn on orphan section placement
  arm/boot: Warn on orphan section placement
  arm/build: Warn on orphan section placement
  arm64/build: Warn on orphan section placement
  x86/boot/compressed: Add missing debugging sections to output
  x86/boot/compressed: Remove, discard, or assert for unwanted sections
  x86/boot/compressed: Reorganize zero-size section asserts
  x86/build: Add asserts for unwanted sections
  x86/build: Enforce an empty .got.plt section
  x86/asm: Avoid generating unused kprobe sections
  arm/boot: Handle all sections explicitly
  arm/build: Assert for unwanted sections
  arm/build: Add missing sections
  arm/build: Explicitly keep .ARM.attributes sections
  arm/build: Refactor linker script headers
  arm64/build: Assert for unwanted sections
  arm64/build: Add missing DWARF sections
  arm64/build: Use common DISCARDS in linker script
  arm64/build: Remove .eh_frame* sections due to unwind tables
  ...

Pull EFI changes from Ingo Molnar:

 - Preliminary RISC-V enablement - the bulk of it will arrive via the
   RISCV tree.

 - Relax decompressed image placement rules for 32-bit ARM

 - Add support for passing MOK certificate table contents via a config
   table rather than a EFI variable.

 - Add support for 18 bit DIMM row IDs in the CPER records.

 - Work around broken Dell firmware that passes the entire Boot####
   variable contents as the command line

 - Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
   can identify it in the memory map listings.

 - Don't abort the boot on arm64 if the EFI RNG protocol is available
   but returns with an error

 - Replace slashes with exclamation marks in efivarfs file names

 - Split efi-pstore from the deprecated efivars sysfs code, so we can
   disable the latter on !x86.

 - Misc fixes, cleanups and updates.

* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  efi: mokvar: add missing include of asm/early_ioremap.h
  efi: efivars: limit availability to X86 builds
  efi: remove some false dependencies on CONFIG_EFI_VARS
  efi: gsmi: fix false dependency on CONFIG_EFI_VARS
  efi: efivars: un-export efivars_sysfs_init()
  efi: pstore: move workqueue handling out of efivars
  efi: pstore: disentangle from deprecated efivars module
  efi: mokvar-table: fix some issues in new code
  efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
  efivarfs: Replace invalid slashes with exclamation marks in dentries.
  efi: Delete deprecated parameter comments
  efi/libstub: Fix missing-prototypes in string.c
  efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
  cper,edac,efi: Memory Error Record: bank group/address and chip id
  edac,ghes,cper: Add Row Extension to Memory Error Record
  efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
  efi/libstub: Add efi_warn and *_once logging helpers
  integrity: Load certs from the EFI MOK config table
  integrity: Move import of MokListRT certs to a separate routine
  efi: Support for MOK variable config table
  ...

Pull locking updates from Ingo Molnar:
 "These are the locking updates for v5.10:

   - Add deadlock detection for recursive read-locks.

     The rationale is outlined in commit 224ec489 ("lockdep/
     Documention: Recursive read lock detection reasoning")

     The main deadlock pattern we want to detect is:

           TASK A:                 TASK B:

           read_lock(X);
                                   write_lock(X);
           read_lock_2(X);

   - Add "latch sequence counters" (seqcount_latch_t):

     A sequence counter variant where the counter even/odd value is used
     to switch between two copies of protected data. This allows the
     read path, typically NMIs, to safely interrupt the write side
     critical section.

     We utilize this new variant for sched-clock, and to make x86 TSC
     handling safer.

   - Other seqlock cleanups, fixes and enhancements

   - KCSAN updates

   - LKMM updates

   - Misc updates, cleanups and fixes"

* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
  lockdep: Fix lockdep recursion
  lockdep: Fix usage_traceoverflow
  locking/atomics: Check atomic-arch-fallback.h too
  locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
  lockdep: Optimize the memory usage of circular queue
  seqlock: Unbreak lockdep
  seqlock: PREEMPT_RT: Do not starve seqlock_t writers
  seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
  seqlock: seqcount_t: Implement all read APIs as statement expressions
  seqlock: Use unique prefix for seqcount_t property accessors
  seqlock: seqcount_LOCKNAME_t: Standardize naming convention
  seqlock: seqcount latch APIs: Only allow seqcount_latch_t
  rbtree_latch: Use seqcount_latch_t
  x86/tsc: Use seqcount_latch_t
  timekeeping: Use seqcount_latch_t
  time/sched_clock: Use seqcount_latch_t
  seqlock: Introduce seqcount_latch_t
  mm/swap: Do not abuse the seqcount_t latching API
  time/sched_clock: Use raw_read_seqcount_latch() during suspend
  ...

Pull scheduler updates from Ingo Molnar:

 - reorganize & clean up the SD* flags definitions and add a bunch of
   sanity checks. These new checks caught quite a few bugs or at least
   inconsistencies, resulting in another set of patches.

 - rseq updates, add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ

 - add a new tracepoint to improve CPU capacity tracking

 - improve overloaded SMP system load-balancing behavior

 - tweak SMT balancing

 - energy-aware scheduling updates

 - NUMA balancing improvements

 - deadline scheduler fixes and improvements

 - CPU isolation fixes

 - misc cleanups, simplifications and smaller optimizations

* tag 'sched-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  sched/deadline: Unthrottle PI boosted threads while enqueuing
  sched/debug: Add new tracepoint to track cpu_capacity
  sched/fair: Tweak pick_next_entity()
  rseq/selftests: Test MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
  rseq/selftests,x86_64: Add rseq_offset_deref_addv()
  rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
  sched/fair: Use dst group while checking imbalance for NUMA balancer
  sched/fair: Reduce busy load balance interval
  sched/fair: Minimize concurrent LBs between domain level
  sched/fair: Reduce minimal imbalance threshold
  sched/fair: Relax constraint on task's load during load balance
  sched/fair: Remove the force parameter of update_tg_load_avg()
  sched/fair: Fix wrong cpu selecting from isolated domain
  sched: Remove unused inline function uclamp_bucket_base_value()
  sched/rt: Disable RT_RUNTIME_SHARE by default
  sched/deadline: Fix stale throttling on de-/boosted tasks
  sched/numa: Use runnable_avg to classify node
  sched/topology: Move sd_flag_debug out of #ifdef CONFIG_SYSCTL
  MAINTAINERS: Add myself as SCHED_DEADLINE reviewer
  sched/topology: Move SD_DEGENERATE_GROUPS_MASK out of linux/sched/topology.h
  ...

When TABs are being used to indent the code excerpts inside the bullet
lists some of the tools [vim in particular] fail to recognize it and
continue interpreting the special characters inside the quoted excerpt.

Update indentation in driver.rst for code excerpts to avoid
their special interpretation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201007143817.76335-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>

Fix typo.
s/occured/occurred/
Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Link: https://lore.kernel.org/r/20201012082441.5831-1-naoki.hayama@lineo.co.jpSigned-off-by: Jonathan Corbet <corbet@lwn.net>

Pull x86 entry code updates from Thomas Gleixner:
 "More consolidation and correctness fixes for the debug exception:

   - Ensure BTF synchronization under all circumstances

   - Distangle kernel and user mode #DB further

   - Get ordering vs. the debug notifier correct to make KGDB work more
     reliably.

   - Cleanup historical gunk and make the code simpler to understand"

* tag 'x86-entry-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Change thread.debugreg6 to thread.virtual_dr6
  x86/debug: Support negative polarity DR6 bits
  x86/debug: Simplify hw_breakpoint_handler()
  x86/debug: Remove aout_dump_debugregs()
  x86/debug: Remove the historical junk
  x86/debug: Move cond_local_irq_enable() block into exc_debug_user()
  x86/debug: Move historical SYSENTER junk into exc_debug_kernel()
  x86/debug: Simplify #DB signal code
  x86/debug: Remove handle_debug(.user) argument
  x86/debug: Move kprobe_debug_handler() into exc_debug_kernel()
  x86/debug: Sync BTF earlier

Pull x86 irq updates from Thomas Gleixner:
 "Surgery of the MSI interrupt handling to prepare the support of
  upcoming devices which require non-PCI based MSI handling:

   - Cleanup historical leftovers all over the place

   - Rework the code to utilize more core functionality

   - Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
     assignment to PCI devices possible.

   - Assign irqdomains to PCI devices at initialization time which
     allows to utilize the full functionality of hierarchical
     irqdomains.

   - Remove arch_.*_msi_irq() functions from X86 and utilize the
     irqdomain which is assigned to the device for interrupt management.

   - Make the arch_.*_msi_irq() support conditional on a config switch
     and let the last few users select it"

* tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS
  x86/apic/msi: Unbreak DMAR and HPET MSI
  iommu/amd: Remove domain search for PCI/MSI
  iommu/vt-d: Remove domain search for PCI/MSI[X]
  x86/irq: Make most MSI ops XEN private
  x86/irq: Cleanup the arch_*_msi_irqs() leftovers
  PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable
  x86/pci: Set default irq domain in pcibios_add_device()
  iommm/amd: Store irq domain in struct device
  iommm/vt-d: Store irq domain in struct device
  x86/xen: Wrap XEN MSI management into irqdomain
  irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()
  x86/xen: Consolidate XEN-MSI init
  x86/xen: Rework MSI teardown
  x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init()
  PCI/MSI: Provide pci_dev_has_special_msi_domain() helper
  PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI
  irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI
  x86/irq: Initialize PCI/MSI domain at PCI init time
  x86/pci: Reducde #ifdeffery in PCI init code
  ...

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:
   - Allow trimming of interrupt hierarchy to support odd hardware
     setups where only a subset of the interrupts requires the full
     hierarchy.

   - Allow the retrigger mechanism to follow a hierarchy to simplify
     driver code.

   - Provide a mechanism to force enable wakeup interrrupts on suspend.

   - More infrastructure to handle IPIs in the core code

  Architectures:
   - Convert ARM/ARM64 IPI handling to utilize the interrupt core code.

  Drivers:
   - The usual pile of new interrupt chips (MStar, Actions Owl, TI
     PRUSS, Designware ICTL)

   - ARM(64) IPI related conversions

   - Wakeup support for Qualcom PDC

   - Prevent hierarchy corruption in the NVIDIA Tegra driver

   - The usual small fixes, improvements and cleanups all over the
     place"

* tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  dt-bindings: interrupt-controller: Add MStar interrupt controller
  irqchip/irq-mst: Add MStar interrupt controller support
  soc/tegra: pmc: Don't create fake interrupt hierarchy levels
  soc/tegra: pmc: Allow optional irq parent callbacks
  gpio: tegra186: Allow optional irq parent callbacks
  genirq/irqdomain: Allow partial trimming of irq_data hierarchy
  irqchip/qcom-pdc: Reset PDC interrupts during init
  irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
  pinctrl: qcom: Use return value from irq_set_wake() call
  pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
  ARM: Handle no IPI being registered in show_ipi_list()
  MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
  irqchip: Add Actions Semi Owl SIRQ controller
  dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
  dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller
  irqchip/dw-apb-ictl: Add primary interrupt controller support
  irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains
  genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
  ...

Pull timekeeping updates from Thomas Gleixner:
 "Updates for timekeeping, timers and related drivers:

  Core:

   - Early boot support for the NMI safe timekeeper by utilizing
     local_clock() up to the point where timekeeping is initialized.
     This allows printk() to store multiple timestamps in the ringbuffer
     which is useful for coordinating dmesg information across a fleet
     of machines.

   - Provide a multi-timestamp accessor for printk()

   - Make timer init more robust by checking for invalid timer flags.

   - Comma vs semicolon fixes

  Drivers:

   - Support for new platforms in existing drivers (SP804 and Renesas
     CMT)

   - Comma vs semicolon fixes

* tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements
  clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements
  timers: Mask invalid flags in do_init_timer()
  clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
  clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
  clocksource/drivers/sp804: Support non-standard register offset
  clocksource/drivers/sp804: Prepare for support non-standard register offset
  clocksource/drivers/sp804: Remove a mismatched comment
  clocksource/drivers/sp804: Delete the leading "__" of some functions
  clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
  clocksource/drivers/sp804: Cleanup clk_get_sys()
  dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
  dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
  alarmtimer: Convert comma to semicolon
  timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
  timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot

Pull debugobjects updates from Thomas Gleixner:
 "A small set of updates for debug objects:

   - Make all debug object descriptors constant. There is no reason to
     have them writeable.

   - Free the per CPU object pool after CPU unplug to avoid memory
     waste"

* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Free per CPU pool after CPU unplug
  treewide: Make all debug_obj_descriptors const
  debugobjects: Allow debug_obj_descr to be const

Pull x86 fix from Borislav Petkov:
 "A single fix making the error message when the opcode bytes at rIP
  cannot be accessed during an oops, more precise"

* tag 'x86_core_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Fix misleading instruction pointer error message

Pull x86 cache resource control updates from Borislav Petkov:

 - Misc cleanups to the resctrl code in preparation for the ARM side
   (James Morse)

 - Add support for controlling per-thread memory bandwidth throttling
   delay values on hw which supports it (Fenghua Yu)

* tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Enable user to view thread or core throttling mode
  x86/resctrl: Enumerate per-thread MBA controls
  cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
  x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps
  x86/resctrl: Merge AMD/Intel parse_bw() calls
  x86/resctrl: Add struct rdt_membw::arch_needs_linear to explain AMD/Intel MBA difference
  x86/resctrl: Use is_closid_match() in more places
  x86/resctrl: Include pid.h
  x86/resctrl: Use container_of() in delayed_work handlers
  x86/resctrl: Fix stale comment
  x86/resctrl: Remove struct rdt_membw::max_delay
  x86/resctrl: Remove unused struct mbm_state::chunks_bw