- 28 Jan, 2014 40 commits
-
-
Liu Bo authored
@full is not protected within global_rsv.lock, so we may think global_rsv is already full but in fact it's not, so we miss the opportunity to return free space to global_rsv directly when we release other block_rsvs. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Wang Shilong authored
During balance test, we hit an oops: [ 2013.841551] kernel BUG at fs/btrfs/relocation.c:1174! The problem is that if we fail to relocate tree blocks, we should update backref cache, otherwise, some pending nodes are not updated while snapshot check @cache->last_trans is within one transaction and won't update it and then oops happen. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
The following warning message was outputed when running the 274th case of xfstests with nodatacow option: BUG: Bad page state in process kswapd0 pfn:1c66f page:ffffea0000636848 count:0 mapcount:0 mapping:(null) index:0x78000 page flags: 0x1000000000100a(error|uptodate|private_2) It is because the check of nocow range was wrong, we should compare the start and end position of the extent with the write position to verify if the write position was in the extent, but the current code just used the start postion to do the check, so we got the wrong extent and told the caller that it was a nocow write. And then when we write back the dirty pages, we found we should cow the extent, but at that time, there was no space in the fs, we had to the error flag for the page. When someone reclaimed that page, the above warning outputed. Fix it. Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Wang Shilong authored
Previously, we will free reloc root memory and then force filesystem to be readonly. The problem is that there may be another thread commiting transaction which will try to access freed reloc root during merging reloc roots process. To keep consistency snapshots shared space, we should allow snapshot finished if possible, so here we don't free reloc root memory. signed-off-by:
-
Wang Shilong authored
@nr is no longer used, remove it from select_reloc_root() Signed-off-by:
-
Filipe David Borba Manana authored
If we do a btree search with the goal of updating an existing item without changing its size (ins_len == 0 and cow == 1), then we never need to hold locks on upper level nodes (even when slot == 0) after we COW their child nodes/leaves, as we won't have node splits or merges in this scenario (that is, no key additions, removals or shifts on any nodes or leaves). Therefore release the locks immediately after COWing the child nodes/leaves while navigating the btree, even if their parent slot is 0, instead of returning a path to the caller with those nodes locked, which would get released only when the caller releases or frees the path (or if it calls btrfs_unlock_up_safe). This is a common scenario, for example when updating inode items in fs trees and block group items in the extent tree. The following benchmarks were performed on a quad core machine with 32Gb of ram, using a leaf/node size of 4Kb (to generate deeper fs trees more quickly). sysbench --test=fileio --file-num=131072 --file-total-size=8G \ --file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \ --max-requests=100000 --file-io-mode=sync [prepare|run] Before this change: 49.85Mb/s (average of 5 runs) After this change: 50.38Mb/s (average of 5 runs) Signed-off-by:Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Wenliang Fan authored
The local variable 'new_size' comes from userspace. If a large number was passed, there would be an integer overflow in the following line: new_size = old_size + new_size; Signed-off-by:
Wenliang Fan <fanwlexca@gmail.com> Signed-off-by:
-
Josef Bacik authored
We can starve out the transaction commit with a bunch of caching threads all running at the same time. This is because we will only drop the extent_commit_sem if we need_resched(), which isn't likely to happen since we will be reading a lot from the disk so have already schedule()'ed plenty. Alex observed that he could starve out a transaction commit for up to a minute with 32 caching threads all running at once. This will allow us to drop the extent_commit_sem to allow the transaction commit to swap the commit_root out and then all the cachers will start back up. Here is an explanation provided by Igno So, just to fill in what happens in this loop: mutex_unlock(&caching_ctl->mutex); cond_resched(); goto again; where 'again:' takes caching_ctl->mutex and fs_info->extent_commit_sem again: again: mutex_lock(&caching_ctl->mutex); /* need to make sure the commit_root doesn't disappear */ down_read(&fs_info->extent_commit_sem); So, if I'm reading the code correct, there can be a fair amount of concurrency here: there may be multiple 'caching kthreads' per filesystem active, while there's one fs_info->extent_commit_sem per filesystem AFAICS. So, what happens if there are a lot of CPUs all busy holding the ->extent_commit_sem rwsem read-locked and a writer arrives? They'd all rush to try to release the fs_info->extent_commit_sem, and they'd block in the down_read() because there's a writer waiting. So there's a guarantee of forward progress. This should answer akpm's concern I think. Thanks, Acked-by:Ingo Molnar <mingo@kernel.org> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Josef Bacik authored
Btrfs needs a simple way to know if it needs to let go of it's read lock on a rwsem. Introduce rwsem_is_contended to check to see if there are any waiters on this rwsem currently. This is just a hueristic, it is meant to be light and not 100% accurate and called by somebody already holding on to the rwsem in either read or write. Thanks, Signed-off-by:
-
Miao Xie authored
The inode reference item is close to inode item, so we insert it simultaneously with the inode item insertion when we create a file/directory.. In fact, we also can handle the inode reference deletion by the same way. So we made this patch to introduce the delayed inode reference deletion for the single link inode(At most case, the file doesn't has hard link, so we don't take the hard link into account). This function is based on the delayed inode mechanism. After applying this patch, we can reduce the time of the file/directory deletion by ~10%. Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
Two reasons: - btrfs_end_transaction_dmeta() is the same as btrfs_end_transaction_throttle() so it is unnecessary. - All the delayed items should be dealt in the current transaction, so the workers should not commit the transaction, instead, deal with the delayed items as many as possible. So we can remove btrfs_end_transaction_dmeta() Signed-off-by:
-
Miao Xie authored
- move the condition check for wait into a function - use wait_event_interruptible instead of prepare-schedule-finish process Signed-off-by:
-
Miao Xie authored
If the number of the delayed items is greater than the upper limit, we will try to flush all the delayed items. After that, it is unnecessary to run them again because they are being dealt with by the wokers or the number of them is less than the lower limit. Signed-off-by:
-
Miao Xie authored
Before applying the patch commit de3cb945 title: Btrfs: improve the delayed inode throttling We need requeue the async work after the current work was done, it introduced a deadlock problem. So we wrote the code that this patch removes to avoid the above problem. But after applying the above patch, the deadlock problem didn't exist. So we should remove that fix code. Signed-off-by:
-
Frank Holton authored
Convert all applicable cases of printk and pr_* to the btrfs_* macros. Fix all uses of the BTRFS prefix. Signed-off-by:
Frank Holton <fholton@gmail.com> Signed-off-by:
-
Filipe David Borba Manana authored
While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: -
David Sterba authored
Warn if the balance goes below zero, which appears to be unlikely though. Otherwise cleans up the code a bit. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Wang Shilong authored
Since daivd did the work that force us to use readonly snapshot, we can safely remove transaction protection from btrfs send. Signed-off-by:
-
Miao Xie authored
We met the following oops when doing space balance: kobject (ffff88081b590278): tried to init an initialized object, something is seriously wrong. ... Call Trace: [<ffffffff81937262>] dump_stack+0x49/0x5f [<ffffffff8137d259>] kobject_init+0x89/0xa0 [<ffffffff8137d36a>] kobject_init_and_add+0x2a/0x70 [<ffffffffa009bd79>] ? clear_extent_bit+0x199/0x470 [btrfs] [<ffffffffa005e82c>] __link_block_group+0xfc/0x120 [btrfs] [<ffffffffa006b9db>] btrfs_make_block_group+0x24b/0x370 [btrfs] [<ffffffffa00a899b>] __btrfs_alloc_chunk+0x54b/0x7e0 [btrfs] [<ffffffffa00a8c6f>] btrfs_alloc_chunk+0x3f/0x50 [btrfs] [<ffffffffa0060123>] do_chunk_alloc+0x363/0x440 [btrfs] [<ffffffffa00633d4>] btrfs_check_data_free_space+0x104/0x310 [btrfs] [<ffffffffa0069f4d>] btrfs_write_dirty_block_groups+0x48d/0x600 [btrfs] [<ffffffffa007aad4>] commit_cowonly_roots+0x184/0x250 [btrfs] ... Steps to reproduce: # mkfs.btrfs -f <dev> # mount -o nospace_cache <dev> <mnt> # btrfs balance start <mnt> # dd if=/dev/zero of=<mnt>/tmpfile bs=1M count=1 The reason of this problem is that we initialized the raid kobject when we added a block group into a empty raid list. As we know, when we mounted a btrfs filesystem, the raid list was empty, we would initialize the raid kobject when we added the first block group. But if there was not data stored in the block group, the block group would be freed when doing balance, and the raid list would be empty. And then if we allocated a new block group and added it into the raid list, we would initialize the raid kobject again, the oops happened. Fix this problem by initializing the raid kobject just when mounting the fs. Signed-off-by:
-
Wang Shilong authored
See the warning below: [ 1209.102076] [<ffffffffa04721b9>] remove_extent_mapping+0x69/0x70 [btrfs] [ 1209.102084] [<ffffffffa0466b06>] btrfs_evict_inode+0x96/0x4d0 [btrfs] [ 1209.102089] [<ffffffff81073010>] ? wake_atomic_t_function+0x40/0x40 [ 1209.102092] [<ffffffff8118ab2e>] evict+0x9e/0x190 [ 1209.102094] [<ffffffff8118b313>] iput+0xf3/0x180 [ 1209.102101] [<ffffffffa0461fd1>] btrfs_run_delayed_iputs+0xb1/0xd0 [btrfs] [ 1209.102107] [<ffffffffa045d358>] __btrfs_end_transaction+0x268/0x350 [btrfs] clear extent bit here to avoid triggering WARN_ON() in remove_extent_mapping() Signed-off-by:
-
David Sterba authored
All the subvolues that are involved in send must be read-only during the whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the status to read-write and the result of send stream is undefined if the data change unexpectedly. Fix that by adding a refcount for all involved roots and verify that there's no send in progress during SUBVOL_SETFLAGS ioctl call that does read-only -> read-write transition. We need refcounts because there are no restrictions on number of send parallel operations currently run on a single subvolume, be it source, parent or one of the multiple clone sources. Kernel is silent when the RO checks fail and returns EPERM. The same set of checks is done already in userspace before send starts. Signed-off-by:
-
David Sterba authored
Unused since ed259095 "Btrfs: stop using vfs_read in send". Signed-off-by:
-
David Sterba authored
Remove ifdefed code: - tlv_put for 8, 16 and 32, add a generic tempalte if needed in future - tlv_put_timespec - the btrfs_timespec fields are used - fs_path_remove obsoleted long ago Signed-off-by:
-
Filipe David Borba Manana authored
While running btrfs/004 from xfstests, after 503 iterations, dmesg reported a deadlock between tasks iterating inode refs and tasks running delayed inodes (during a transaction commit). It turns out that iterating inode refs implies doing one tree search and release all nodes in the path except the leaf node, and then passing that leaf node to btrfs_ref_to_path(), which in turn does another tree search without releasing the lock on the leaf node it received as parameter. This is a problem when other task wants to write to the btree as well and ends up updating the leaf that is read locked - the writer task locks the parent of the leaf and then blocks waiting for the leaf's lock to be released - at the same time, the task executing btrfs_ref_to_path() does a second tree search, without releasing the lock on the first leaf, and wants to access a leaf (the same or another one) that is a child of the same parent, resulting in a deadlock. The trace reported by lockdep follows. [84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds. [84314.936381] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936386] fsstress D ffff8806e1bf8000 0 11930 11926 0x00000000 [84314.936393] ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd [84314.936399] ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8 [84314.936405] ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190 [84314.936410] Call Trace: [84314.936421] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936428] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936451] [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs] [84314.936457] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936470] [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs] [84314.936489] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936504] [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [84314.936510] [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0 [84314.936528] [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs] [84314.936543] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936558] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936573] [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs] [84314.936589] [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs] [84314.936604] [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs] [84314.936620] [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs] [84314.936630] [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs] [84314.936635] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936639] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936643] [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30 [84314.936648] [<ffffffff811a3541>] iterate_supers+0xf1/0x100 [84314.936652] [<ffffffff811d0c45>] sys_sync+0x55/0x90 [84314.936658] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936660] INFO: lockdep is turned off. [84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds. [84314.936666] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936670] btrfs D ffff880541729a88 0 11955 11608 0x00000000 [84314.936674] ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd [84314.936680] ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8 [84314.936685] ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000 [84314.936690] Call Trace: [84314.936695] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936700] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936717] [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs] [84314.936721] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936733] [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs] [84314.936746] [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs] [84314.936763] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936780] [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs] [84314.936797] [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs] [84314.936813] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936830] [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs] [84314.936846] [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs] [84314.936851] [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200 [84314.936868] [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs] [84314.936873] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [84314.936877] [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00 [84314.936882] [<ffffffff81075563>] ? up_read+0x23/0x40 [84314.936886] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [84314.936892] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [84314.936896] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [84314.936901] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [84314.936906] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [84314.936910] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [84314.936915] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [84314.936920] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936922] INFO: lockdep is turned off. [84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds. [84434.866881] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84434.866886] btrfs-transacti D ffff880755b6a478 0 11921 2 0x00000000 [84434.866893] ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd [84434.866899] ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8 [84434.866904] ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0 [84434.866910] Call Trace: [84434.866920] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84434.866927] [<ffffffff81774269>] schedule+0x29/0x70 [84434.866948] [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs] [84434.866954] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84434.866970] [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs] [84434.866985] [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs] [84434.866999] [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs] [84434.867012] [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs] [84434.867026] [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs] [84434.867030] [<ffffffff81070dad>] kthread+0xed/0x100 [84434.867035] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 [84434.867040] [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0 [84434.867044] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 Signed-off-by:
-
Wang Shilong authored
Chris introduced hleper function read_csums() and this function has been removed, but we forgot to remove its corresponding comments. Signed-off-by:
-
Filipe David Borba Manana authored
It's not used anywhere, so just drop it. Signed-off-by:
-
Filipe David Borba Manana authored
fs/btrfs/file.c: In function ‘prepare_pages.isra.18’: fs/btrfs/file.c:1265:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by:
-
Wang Shilong authored
We have commited transaction before, remove redundant filemap writting and waiting here, it can speed up balance relocation process. Signed-off-by:
-
Tsutomu Itoh authored
Clean up btrfs_lookup_dentry() to never return NULL, but PTR_ERR(-ENOENT) instead. This keeps the return value convention consistent. Callers who use btrfs_lookup_dentry() require a trivial update. create_snapshot() in particular looks like it can also lose a BUG_ON(!inode) which is not really needed - there seems less harm in returning ENOENT to userspace at that point in the stack than there is to crash the machine. Signed-off-by:
-
Filipe David Borba Manana authored
In ctree.c:tree_mod_log_set_node_key() we were calling __tree_mod_log_insert_key() even when the modification doesn't need to be logged. This would allocate a tree_mod_elem structure, fill it and pass it to __tree_mod_log_insert(), which would just acquire the tree mod log write lock and then free the tree_mod_elem structure and return (that is, a no-op). Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert() which just returns immediately if the modification doesn't need to be logged (without allocating the structure, fill it, acquire write lock, free structure). Signed-off-by:
-
Josef Bacik authored
I need to create a fake tree to test qgroups and I don't want to have to setup a fake btree_inode. The fact is we only use the radix tree for the fs_info, so everybody else who allocates an extent_io_tree is just wasting the space anyway. This patch moves the radix tree and its lock into btrfs_fs_info so there is less stuff I have to fake to do qgroup sanity tests. Thanks, Signed-off-by:
-
Josef Bacik authored
For creating a dummy in-memory btree I need to be able to use the radix tree to keep track of the buffers like normal extent buffers. With dummy buffers we skip the radix tree step, and we still want to do that for the tree mod log dummy buffers but for my test buffers we need to be able to remove them from the radix tree like normal. This will give me a way to do that. Thanks, Signed-off-by:
-
Josef Bacik authored
I need to add infrastructure to allocate dummy extent buffers for running sanity tests, and to do this I need to not have to worry about having an address_mapping for an io_tree, so just fix up the places where we assume that all io_tree's have a non-NULL ->mapping. Thanks, Signed-off-by:
-
Filipe David Borba Manana authored
Currently when finding the leaf to insert a key into a btree, if the leaf doesn't have enough space to store the item we attempt to move off some items from our leaf to its right neighbor leaf, and if this fails to create enough free space in our leaf, we try to move off more items to the left neighbor leaf as well. When trying to move off items to the right neighbor leaf, if it has enough room to store the new key but not not enough room to move off at least one item from our target leaf, __push_leaf_right returns 1 and we have to attempt to move items to the left neighbor (push_leaf_left function) without touching the right neighbor leaf. For the case where the right leaf has enough room to store at least 1 item from our leaf, we end up modifying (and dirtying) both our leaf and the right leaf. This is non-optimal for the case where the new key is greater than any key in our target leaf because it can be inserted at slot 0 of the right neighbor leaf and we don't need to touch our leaf at all nor to attempt to move off items to the left neighbor leaf. Therefore this change just selects the right neighbor leaf as our new target leaf if it has enough room for the new key without modifying our initial target leaf - we do this only if the new key is higher than any key in the initial target leaf. While running the following test, push_leaf_right was called by split_leaf 4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this special case (right leaf has enough room and new key is higher than any key in the initial target leaf). Test: sysbench --test=fileio --file-num=512 --file-total-size=5G \ --file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \ --max-requests=100000 --file-io-mode=sync [prepare|run] Results: sequential writes Throughput before this change: 65.71Mb/sec (average of 10 runs) Throughput after this change: 66.58Mb/sec (average of 10 runs) random writes Throughput before this change: 10.75Mb/sec (average of 10 runs) Throughput after this change: 11.56Mb/sec (average of 10 runs) Signed-off-by: -
Wang Shilong authored
Just wrap same code into one function scrub_blocked_if_needed(). This make a change that we will move waiting (@workers_pending = 0) before we can wake up commiting transaction(atomic_inc(@scrub_paused)), we must take carefully to not deadlock here. Thread 1 Thread 2 |->btrfs_commit_transaction() |->set trans type(COMMIT_DOING) |->btrfs_scrub_paused()(blocked) |->join_transaction(blocked) Move btrfs_scrub_paused() before setting trans type which means we can still join a transaction when commiting_transaction is blocked. Signed-off-by:
-
Wang Shilong authored
We came a race condition when scrubbing superblocks, the story is: In commiting transaction, we will update @last_trans_commited after writting superblocks, if scrubber start after writting superblocks and before updating @last_trans_commited, generation mismatch happens! We fix this by checking @scrub_pause_req, and we won't start a srubber until commiting transaction is finished.(after btrfs_scrub_continue() finished.) Reported-by:
Sebastian Ochmann <ochmann@informatik.uni-bonn.de> Signed-off-by:
-
Filipe David Borba Manana authored
fs/btrfs/send.c:2190:9: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:2190:9: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:2190:9: got restricted __le64 [usertype] ctransid fs/btrfs/send.c:2195:17: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:2195:17: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:2195:17: got restricted __le64 [usertype] ctransid fs/btrfs/send.c:3716:9: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:3716:9: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:3716:9: got restricted __le64 [usertype] ctransid Signed-off-by:
-
Filipe David Borba Manana authored
When merging an extent_map with its right neighbor, increment its block_len with the neighbor's block_len. Signed-off-by:
-
Michal Nazarewicz authored
[commit 8185554d: fix incorrect inode acl reset] introduced a dead code by adding a condition which can never be true to an else branch. The condition can never be true because it is already checked by a previous if statement which causes function to return. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Reviewed-By:
-
