- 18 Jun, 2017 1 commit
-
-
Wei Wang authored
In ipv6 tx path, rcu_read_lock() is taken so that dst won't get freed during the execution of ip6_fragment(). Hence, no need to hold dst in it. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 16 Jun, 2017 39 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 updates and cleanups 2017-06-16 mlx5-updates-2017-06-16 This series provide some updates and cleanups for mlx5 core and netdevice driver. From Eli Cohen, add a missing event string. From Or Gerlitz, some checkpatch cleanups. From Moni, Disalbe HW level LAG when SRIOV is enabled. From Tariq, A code reuse cleanup in aRFS flow. From Itay Aveksis, Typo fix. From Gal Pressman, ethtool statistics updates and "update stats" deferred work optimizations. From Majd Dibbiny, Fast unload support on kernel shutdown. ==================== Signed-off-by: -
Vivien Didelot authored
Similarly to how cross-chip VLAN works, define a bitmap of multicast group members for a switch, now including its DSA ports, so that multicast traffic can be sent to all switches of the fabric. A switch may drop the frames if no user port is a member. This brings support for multicast in a multi-chip environment. As of now, all switches of the fabric must support the multicast operations in order to program a single fabric port. Reported-by:
Jason Cobham <jcobham@questertangent.com> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nathan Fontenot authored
When booting into the kdump/kexec kernel, pHyp and vios are not prepared for the initialization crq request and a failover transport event is generated. This is not handled correctly. At this point in initialization the driver is still in the 'probing' state and cannot handle a full reset of the driver as is normally done for a failover transport event. To correct this we catch driver resets while still in the 'probing' state and return EAGAIN. This results in the driver tearing down the main crq and calling ibmvnic_init() again. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Wei Wang authored
In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== rds: tcp: misc bug fixes This series contains 2 bug fixes (patch2, patch3) and one bit of code cleanup (patch1) identified during database testing ==================== Signed-off-by: -
Sowmini Varadhan authored
Each time we get an incoming SYN to the RDS_TCP_PORT, the TCP layer accepts the connection and then the rds_tcp_accept_one() callback is invoked to process the incoming connection. rds_tcp_accept_one() may reject the incoming syn for a number of reasons, e.g., commit 1a0e100f ("RDS: TCP: Force every connection to be initiated by numerically smaller IP address"), or because we are getting spammed by a malicious node that is triggering a flood of connection attempts to RDS_TCP_PORT. If the incoming syn is rejected, no data would have been sent on the TCP socket, and we do not need to be in TIME_WAIT state, so we set linger on the TCP socket before closing, thereby closing the socket efficiently with a RST. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by:
Imanti Mendez <imanti.mendez@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Found when testing between sparc and x86 machines on different subnets, so the address comparison patterns hit the corner cases and brought out some bugs fixed by this patch. Signed-off-by:
-
Sowmini Varadhan authored
After commit 1a0e100f ("RDS: TCP: Force every connection to be initiated by numerically smaller IP address") we no longer need the logic associated with cp_outgoing, so clean up usage of this field. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: loop: Driver updates This patch series updates drivers/net/dsa/dsa_loop.c to provide more useful coverage of the DSA APIs and how we mangle the CPU ports ethtool statistics to include its switch-facing port counters. ==================== Signed-off-by: -
Florian Fainelli authored
When a DSA driver implements ethtool statistics, we also override the master network device's ethtool statistics with the CPU port's statistics and this has proven to be a possible source of bugs in the past. Enhance the dsa_loop.c driver to provide statistics under the forme of ok/error reads and writes from the per-port PHY read/writes. Signed-off-by:
-
Florian Fainelli authored
This is a simple function that only gets used in the driver's remove function, inline it there. Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== pktgen new parameters This patchset adds two parameters to the pktgen scripts. * The first patch adds a parameter to control the number of packets sent by every pktgen thread. * The second patch adds a parameter to control the index of first thread, instead of always starting from cpu 0. Series generated against net-next commit: f7aec129 rxrpc: Cache the congestion window setting Thanks, Tariq. V2: * rebased to latest net-next. * per Jesper's comments on Patch 2, fixed $F_THREAD description and $L_THREAD evaluation. ==================== Signed-off-by:
-
Tariq Toukan authored
Use "-f <num>", to specify the index of the first sender thread. In default first thread is #0. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Tariq Toukan authored
Use -n <num>, to specify the number of packets every thread sends. Zero means indefinitely. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvmdio: add xMDIO xSMI support This series aims to add the xSMI support on the xMDIO bus to the mvmdio driver. The xSMI interface complies with the IEEE 802.3 clause 45 and is used by 10GbE devices. On 7k and 8k (as of now), such an interface is found and is used by Ethernet controllers. Patches 1-4 and 9 are cosmetic cleanups. Patches 5-7 are prerequisites to the xSMI support. Patches 8 and 10-11 add the xSMI support to the mvmdio driver, and a node is added both in the cp110 slave and master device trees. This was tested on an Armada 8040 mcbin, as well as on both the Armada 7040 DB and the Armada 8040 DB to ensure the SMI interface was still working. @Dave: patch 11 should go through the mvebu tree as asked by Gregory, thanks! ==================== Signed-off-by: -
Antoine Ténart authored
A new compatible for Marvell xMDIO interfaces was added into the Marvell MDIO driver. Document this new compatible. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
Antoine Ténart authored
Cosmetic patch simplifying the smi read and write error paths. It also align their error paths with the ones of the xsmi functions. Signed-off-by:
-
Antoine Ténart authored
This patch adds the xmdio xsmi interface support in the mvmdio driver. This interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as of now). The xsmi interface supported by this driver complies with the IEEE 802.3 clause 45. The xSMI interface is used by 10GbE devices. Signed-off-by:
-
Antoine Ténart authored
Add a check for the read and write smi operations, to ensure the MII_ADDR_C45 bit isn't set. This will be needed as soon as the xSMI support is added to the mvmdio driver. Signed-off-by:
-
Antoine Ténart authored
Put the two poll intervals (min and max) in the driver's ops structure. This is needed to add the xmdio support later. Signed-off-by:
-
Antoine Ténart authored
Introduce an ops structure to add an indirection on the is_done function, as this is needed to add the xMDIO support later. Signed-off-by:
-
Russell King authored
The MDIO layer already provides per-bus locking, so there's no need for MDIO bus drivers to do their own internal locking. Remove this. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
-
Antoine Ténart authored
Cosmetic patch to use the GENMASK helper for masks. Signed-off-by:
-
Antoine Ténart authored
Cosmetic patch replacing spaces by tabs for defined values. Signed-off-by:
-
Antoine Ténart authored
Cosmetic fix reordering headers alphabetically. Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== bpf: xdp: Report bpf_prog ID in IFLA_XDP This is the first usage of the new bpf_prog ID. It is for reporting the ID of a xdp_prog through netlink. It rides on the existing IFLA_XDP. This patch adds IFLA_XDP_PROG_ID for the bpf_prog ID reporting. It starts with changing the generic_xdp first. After that, the hardware driver is changed one by one. Jakub Kicinski mentioned that he will soon introduce XDP_ATTACHED_HW (on top of the existing XDP_ATTACHED_DRV and XDP_ATTACHED_SKB) and he is going to reuse the prog_attached for this purpose. Hence, this patch set keeps the prog_attached even though !!prog_id also implies there is xdp_prog attached. I have tested with generic_xdp, mlx4 and mlx5. v3: 1. Replace 'if' by '?' when checking the xdp_prog pointer as suggested by Jakub Kicinski (thanks!) v2: 1. Remove READ_ONCE since it is alredy under rtnl lock 2. Keep prog_attached in 'struct netdev_xdp' as requested by Jakub Kicinski. The existing prog_attached and the new prog_id are put under a struct for XDP_QUERY_PROG. ==================== Signed-off-by: -
Martin KaFai Lau authored
Add support to qede to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Alexei Starovoitov <ast@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Martin KaFai Lau authored
Add support to nfp to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Martin KaFai Lau authored
Add support to ixgbe to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to thunderx to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to bnxt to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to virtio_net to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Add support to mlx5e to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Martin KaFai Lau authored
Add support to mlx4 to report bpf_prog ID during XDP_QUERY_PROG. Signed-off-by:
-
Martin KaFai Lau authored
Expose prog_id through IFLA_XDP_PROG_ID. This patch makes modification to generic_xdp. The later patches will modify other xdp-supported drivers. prog_id is added to struct net_dev_xdp. iproute2 patch will be followed. Here is how the 'ip link' will look like: > ip link show eth0 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp(prog_id:1) qdisc fq_codel state UP mode DEFAULT group default qlen 1000 Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== skb data accessors cleanup Over night, Fengguang's bot told me that it compiled all of its many various configurations successfully, and I had done allyesconfig on x86_64 myself yesterday to iron out the things I missed. So now I think I'm happy with it. My tree was based on your commit 3715c47b Merge: 18b6e795 d8fbd274 Author: David S. Miller <davem@davemloft.net> Date: Thu Jun 15 14:31:56 2017 -0400 Merge branch 'r8152-support-new-chips' when the compilation tests happened, but I've reviewed the changes coming into net-next in the meantime and didn't see any new usages of skb data accessors having come in. ==================== Signed-off-by: -
Johannes Berg authored
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by:Joe Perches <joe@perches.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: -
Johannes Berg authored
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by:
-
