- 14 Apr, 2015 40 commits
-
-
Sasha Levin authored
Document the structure and files under the new debugfs interface. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
s/CONFIG_CMA_ALIGNMENT/0/, per Joonsoo Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Sasha Levin authored
Provides a userspace interface to trigger a CMA release. Usage: echo [pages] > free This would provide testing/fuzzing access to the CMA release paths. [akpm@linux-foundation.org: coding-style fixes] [mhocko@suse.cz: fix build] Signed-off-by:Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Sasha Levin authored
Provides a userspace interface to trigger a CMA allocation. Usage: echo [pages] > alloc This would provide testing/fuzzing access to the CMA allocation paths. Signed-off-by: -
Sasha Levin authored
I've noticed that there is no interfaces exposed by CMA which would let me fuzz what's going on in there. This small patchset exposes some information out to userspace, plus adds the ability to trigger allocation and freeing from userspace. This patch (of 3): Implement a simple debugfs interface to expose information about CMA areas in the system. Useful for testing/sanity checks for CMA since it was impossible to previously retrieve this information in userspace. Signed-off-by:
-
Sheng Yong authored
Use macro section_nr_to_pfn() to switch between section and pfn, instead of open-coding it. No semantic changes. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
-
Johannes Weiner authored
Add myself to the list of copyright holders. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Baoquan He authored
A small cleanup. Seems in e3239ff9 ("memblock: Rename memblock_region to memblock_type and memblock_property to memblock_region") this one was missed. Signed-off-by:
Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Kirill A. Shutemov authored
It's odd that we have populate_vma_page_range() and __mm_populate() in mm/mlock.c. It's implementation of generic memory population and mlocking is one of possible side effect, if VM_LOCKED is set. __get_user_pages() is core of the implementation. Let's move the code into mm/gup.c. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
-
Kirill A. Shutemov authored
This is praparation to moving mm_populate()-related code out of mm/mlock.c. Signed-off-by:
-
Kirill A. Shutemov authored
__mlock_vma_pages_range() doesn't necessarily mlock pages. It depends on vma flags. The same codepath is used for MAP_POPULATE. Let's rename __mlock_vma_pages_range() to populate_vma_page_range(). This patch also drops mlock_vma_pages_range() references from documentation. It has gone in cea10a19 ("mm: directly use __mlock_vma_pages_range() in find_extend_vma()"). Signed-off-by:
-
Kirill A. Shutemov authored
After commit a1fde08c ("VM: skip the stack guard page lookup in get_user_pages only for mlock") FOLL_MLOCK has lost its original meaning: we don't necessarily mlock the page if the flags is set -- we also take VM_LOCKED into consideration. Since we use the same codepath for __mm_populate(), let's rename FOLL_MLOCK to FOLL_POPULATE. Signed-off-by:
-
Fabian Frederick authored
slob_alloc_node() is only used in slob.c. Remove the EXPORT_SYMBOL and make slob_alloc_node() static. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joe Perches authored
Use the normal return values for bool functions Signed-off-by:
Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
-
David Rientjes authored
CONFIG_SLAB_DEBUG doesn't exist, CONFIG_DEBUG_SLAB does. Signed-off-by:
-
Chris J Arges authored
By moving the O option detection into the switch statement, we allow this parameter to be combined with other options correctly. Previously options like slub_debug=OFZ would only detect the 'o' and use DEBUG_DEFAULT_FLAGS to fill in the rest of the flags. Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
-
Geert Uytterhoeven authored
With gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) : mm/migrate.c: In function `migrate_pages': mm/migrate.c:1148:1: internal compiler error: in push_minipool_fix, at config/arm/arm.c:13500 Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.7/README.Bugs> for instructions. Preprocessed source stored into /tmp/ccPoM1tr.out file, please attach this to your bugreport. make[1]: *** [mm/migrate.o] Error 1 make: *** [mm/migrate.o] Error 2 Mark unmap_and_move() (which is used in a single place only) "noinline" to work around this compiler bug. [akpm@linux-foundation.org: make it conditional on gcc-4.7.3 and arm] [khilman@kernel.org: fine-tune compiler versions] [akpm@linux-foundation.org: fix comment] Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reported-by:
Kevin Hilman <khilman@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Tested-by:
Lina Iyer <lina.iyer@linaro.org> Signed-off-by:
-
Ulrich Obergfell authored
Have kvm_guest_init() use hardlockup_detector_disable() instead of watchdog_enable_hardlockup_detector(false). Remove the watchdog_hardlockup_detector_is_enabled() and the watchdog_enable_hardlockup_detector() function which are no longer needed. Signed-off-by:
Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ulrich Obergfell authored
Rename the update_timers*() functions to update_watchdog*(). Remove the boolean argument from watchdog_enable_all_cpus() because update_watchdog_all_cpus() is now a generic function to change the run state of the lockup detectors and to have the lockup detectors use a new sample period. Signed-off-by:
-
Ulrich Obergfell authored
With the current user interface of the watchdog mechanism it is only possible to disable or enable both lockup detectors at the same time. This series introduces new kernel parameters and changes the semantics of some existing kernel parameters, so that the hard lockup detector and the soft lockup detector can be disabled or enabled individually. With this series applied, the user interface is as follows. - parameters in /proc/sys/kernel . soft_watchdog This is a new parameter to control and examine the run state of the soft lockup detector. . nmi_watchdog The semantics of this parameter have changed. It can now be used to control and examine the run state of the hard lockup detector. . watchdog This parameter is still available to control the run state of both lockup detectors at the same time. If this parameter is examined, it shows the logical OR of soft_watchdog and nmi_watchdog. . watchdog_thresh The semantics of this parameter are not affected by the patch. - kernel command line parameters . nosoftlockup The semantics of this parameter have changed. It can now be used to disable the soft lockup detector at boot time. . nmi_watchdog=0 or nmi_watchdog=1 Disable or enable the hard lockup detector at boot time. The patch introduces '=1' as a new option. . nowatchdog The semantics of this parameter are not affected by the patch. It is still available to disable both lockup detectors at boot time. Also, remove the proc_dowatchdog() function which is no longer needed. [dzickus@redhat.com: wrote changelog] [dzickus@redhat.com: update documentation for kernel params and sysctl] Signed-off-by: -
Ulrich Obergfell authored
If watchdog_nmi_enable() fails to set up the hardware perf event of one CPU, the entire hard lockup detector is deemed unreliable. Hence, disable the hard lockup detector and shut down the hardware perf events on all CPUs. [dzickus@redhat.com: update comments to explain some code] Signed-off-by:
-
Ulrich Obergfell authored
Separate handlers for each watchdog parameter in /proc/sys/kernel replace the proc_dowatchdog() function. Three of those handlers merely call proc_watchdog_common() with one different argument. Signed-off-by:
-
Ulrich Obergfell authored
Three of four handlers for the watchdog parameters in /proc/sys/kernel essentially have to do the same thing. if the parameter is being read { return the state of the corresponding bit(s) in 'watchdog_enabled' } else { set/clear the state of the corresponding bit(s) in 'watchdog_enabled' update the run state of the lockup detector(s) } Hence, introduce a common function that can be called by those handlers. The callers pass a 'bit mask' to this function to indicate which bit(s) should be set/cleared in 'watchdog_enabled'. This function handles an uncommon race with watchdog_nmi_enable() where a concurrent update of 'watchdog_enabled' is possible. We use 'cmpxchg' to detect the concurrency. [This avoids introducing a new spinlock or a mutex to synchronize updates of 'watchdog_enabled'. Using the same lock or mutex in watchdog thread context and in system call context needs to be considered carefully because it can make the code prone to deadlock situations in connection with parking/unparking the watchdog threads.] Signed-off-by: -
Ulrich Obergfell authored
This series removes proc_dowatchdog(). Since multiple new functions need the 'watchdog_proc_mutex' to serialize access to the watchdog parameters in /proc/sys/kernel, move the mutex outside of any function. Signed-off-by:
-
Ulrich Obergfell authored
This series introduces a separate handler for each watchdog parameter in /proc/sys/kernel. The separate handlers need a common function that they can call to update the run state of the lockup detectors, or to have the lockup detectors use a new sample period. Signed-off-by:
-
Ulrich Obergfell authored
The hardlockup and softockup had always been tied together. Due to the request of KVM folks, they had a need to have one enabled but not the other. Internally rework the code to split things apart more cleanly. There is a bunch of churn here, but the end result should be code that should be easier to maintain and fix without knowing the internals of what is going on. This patch (of 9): Introduce new definitions and variables to separate the user interface in /proc/sys/kernel from the internal run state of the lockup detectors. The internal run state is represented by two bits in a new variable that is named 'watchdog_enabled'. This helps simplify the code, for example: - In order to check if any of the two lockup detectors is enabled, it is sufficient to check if 'watchdog_enabled' is not zero. - In order to enable/disable one or both lockup detectors, it is sufficient to set/clear one or both bits in 'watchdog_enabled'. - Concurrent updates of 'watchdog_enabled' need not be synchronized via a spinlock or a mutex. Updates can either be atomic or concurrency can be detected by using 'cmpxchg'. Signed-off-by:
-
Andrew Morton authored
ocfs2 does mlog_errno(v); return v; in many places. Change mlog_errno() so we can do return mlog_errno(v); For some weird reason this patch reduces the size of ocfs2 by 6k: akpm3:/usr/src/25> size fs/ocfs2/ocfs2.ko text data bss dec hex filename 1146613 82767 832192 2061572 1f7504 fs/ocfs2/ocfs2.ko-before 1140857 82767 832192 2055816 1f5e88 fs/ocfs2/ocfs2.ko-after [dan.carpenter@oracle.com: double evaluation concerns in mlog_errno()] Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: alex chen <alex.chen@huawei.com> Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
alex chen authored
If ocfs2 lockres has not been initialized before calling ocfs2_dlm_lock, the lock won't be dropped and then will lead umount hung. The case is described below: ocfs2_mknod ocfs2_mknod_locked __ocfs2_mknod_locked ocfs2_journal_access_di Failed because of -ENOMEM or other reasons, the inode lockres has not been initialized yet. iput(inode) ocfs2_evict_inode ocfs2_delete_inode ocfs2_inode_lock ocfs2_inode_lock_full_nested __ocfs2_cluster_lock Succeeds and allocates a new dlm lockres. ocfs2_clear_inode ocfs2_open_unlock ocfs2_drop_inode_locks ocfs2_drop_lock Since lockres has not been initialized, the lock can't be dropped and the lockres can't be migrated, thus umount will hang forever. Signed-off-by:Alex Chen <alex.chen@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Joe Perches authored
Use the vsprintf %pV extension to avoid using a static buffer and remove the now unnecessary buffer. Signed-off-by:
-
Chengyu Song authored
debugfs_create_dir and debugfs_create_file may return -ENODEV when debugfs is not configured, so the return value should be checked against ERROR_VALUE as well, otherwise the later dereference of the dentry pointer would crash the kernel. This patch tries to solve this problem by fixing certain checks. However, I have that found other call sites are protected by #ifdef CONFIG_DEBUG_FS. In current implementation, if CONFIG_DEBUG_FS is defined, then the above two functions will never return any ERROR_VALUE. So another possibility to fix this is to surround all the buggy checks/functions with the same #ifdef CONFIG_DEBUG_FS. But I'm not sure if this would break any functionality, as only OCFS2_FS_STATS declares dependency on DEBUG_FS. Signed-off-by:
Chengyu Song <csong84@gatech.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Jakub Wilk authored
Signed-off-by:
Jakub Wilk <jwilk@jwilk.net> Reviewed-by:
Eric Ren <zren@suse.com> Signed-off-by:
-
Joseph Qi authored
In ocfs2_local_alloc_find_clear_bits and ocfs2_get_dentry, variable numfound and set may be uninitialized and then used in tracepoint. In ocfs2_xattr_block_get and ocfs2_delete_xattr_in_bucket, variable block_off and xv may be uninitialized and then used in the following logic due to unchecked return value. This patch fixes these possible issues. Signed-off-by:
-
Daeseok Youn authored
Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by:
-
Joseph Qi authored
ocfs2_block_group_clear_bits will clear bits in block group bitmap. Once it succeeds but fails in the following step, it will cause block group bitmap mismatch the corresponding count recorded in dinode. So rollback the cleared bits if error occurs. Signed-off-by:
-
Joseph Qi authored
When ocfs2_get_system_file_inode fails, it is obscure to set the return value to -EEXIST. So change it to -ENOENT. Signed-off-by:
-
Joseph Qi authored
If the namelen is 20 and name only has actual length 16, it will fail in ocfs2_find_entry because of mismatch. So use actual name length when find entry. Signed-off-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Dan Carpenter authored
The code at the "out" label assumes that "default_acl" and "acl" are NULL, but actually the pointers can be NULL, unitialized, or freed. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Joseph Qi authored
In ocfs2_reserve_local_alloc_bits, it calls ocfs2_error if local alloc inode bitmap used bits mismatch, but the log mistakes it as free bits. Signed-off-by:
-
Joseph Qi authored
In ocfs2_direct_IO_write, we use ocfs2_zero_extend to zero allocated clusters in case of cluster not aligned. But ocfs2_zero_extend uses page cache, this may happen that it clears the data which blockdev_direct_IO has already written. We should use blkdev_issue_zeroout instead of ocfs2_zero_extend during direct IO. So fix this issue by introducing ocfs2_direct_IO_zero_extend and ocfs2_direct_IO_extend_no_holes. Reported-by:
-
Joseph Qi authored
We need take inode lock when calling ocfs2_get_clusters. And use GFP_NOFS instead of GFP_KERNEL. Signed-off-by:
-
