- 23 Aug, 2013 2 commits
-
-
Gerhard Sittig authored
use devm_clk_get() for automatic put after device close, check for and propagate errors when enabling clocks, need to prepare clocks before they can get enabled, adjust error code paths to correctly balance get/put and prepare/unprepare and enable/disable calls Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
Gerhard Sittig authored
use devm_get_clk() for automatic put upon device release, check for and propagate errors when enabling clocks, must prepare clocks before they can get enabled, unprepare after disable need to use the _parent_ of the platform device for clock lookup, since this one is associated with the respective device tree node; this change remains neutral as long as a "globally" provided "usb%d_clk" item gets provided by either the PPC_CLOCK implementation or clkdev_register'ed aliases, using the correct devide and thus referencing the right DT node becomes essential when clock lookup will become based on device tree when common clock support will get introduced Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
- 21 Aug, 2013 1 commit
-
-
Gerhard Sittig authored
cleanup the clock API use of the UART driver which is shared among the MPC512x and the MPC5200 platforms - get, prepare, and enable the MCLK during port allocation; disable, unprepare and put the MCLK upon port release; hold a reference to the clock over the period of use; check for and propagate enable errors - fix a buffer overflow for clock names with two digit PSC index numbers - stick with the PPC_CLOCK 'psc%d_mclk' name for clock lookup, only switch to a fixed string later after device tree based clock lookup will have become available to achieve support for MPC512x which is neutral to MPC5200, the modification was done as follows - introduce "clock alloc" and "clock release" routines in addition to the previous "clock enable/disable" routine in the psc_ops struct - make the clock allocation a part of the port request (resource allocation), and make clock release a part of the port release, such that essential resources get allocated early - just enable/disable the clock from within the .clock() callback without any allocation or preparation as the former implementation did, since this routine is called from within the startup and shutdown callbacks - all of the above remains a NOP for the MPC5200 platform (no callbacks are provided on that platform) - implementation note: the clock gets enabled upon allocation already just in case the clock is not only required for bitrate generation but for register access as well Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
- 12 Aug, 2013 2 commits
-
-
Sebastian Siewior authored
My gcc-4.3.5 fails to compile due to: |cc1: warnings being treated as errors |arch/powerpc/platforms/52xx/mpc52xx_pic.c: In function ‘mpc52xx_irqhost_map’: |arch/powerpc/platforms/52xx/mpc52xx_pic.c:343: error: ‘irqchip’ may be used uninitialized in this function since commit e34298c9 ("powerpc: 52xx: nop out unsupported critical IRQs"). This warning is complete crap since only values 0…3 are possible which are checked but gcc fails to understand that. I wouldn't care much but since this is compiled with -Werror I made this patch. While add it, I replaced the warning from l2irq to l1irq since this is the number that is evaluated. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-
Linus Torvalds authored
-
- 11 Aug, 2013 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is three bug fixes: An fnic warning caused by sleeping under a lock, a major regression with our updated WRITE SAME/UNMAP logic which caused tons of USB devices (and one RAID card) to cease to function and a megaraid_sas firmware initialisation problem which causes kdump failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set [SCSI] fnic: BUG: sleeping function called from invalid context during probe [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "This includes small series from Michael Neuling to fix a couple of nasty remaining problems with the new Power8 support, also targeted at stable 3.10, without which some new userspace accessible registers aren't properly context switched, and in some case, can be clobbered by the user of transactional memory. Along with that, a few slightly more minor things, such as a missing Kconfig option to enable handling of denorm exceptions when not running under a hypervisor (or userspace will randomly crash when hitting denorms with the vector unit), some nasty bugs in the new pstore oops code, and other simple bug fixes worth having in now. Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to handle KVM bits while he is on vacation. However I'll let him decide whether they should go to -stable or not when he is back" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs powerpc: Save the TAR register earlier powerpc: Fix context switch DSCR on POWER8 powerpc: Rework setting up H/FSCR bit definitions powerpc: Fix hypervisor facility unavaliable vector number powerpc/kvm/book3s_pr: Return appropriate error when allocation fails powerpc/kvm: Add signed type cast for comparation powerpc/eeh: Add missing procfs entry for PowerNV powerpc/pseries: Add backward compatibilty to read old kernel oops-log powerpc/pseries: Fix buffer overflow when reading from pstore powerpc: On POWERNV enable PPC_DENORMALISATION by default
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull s390 kvm fixes from Paolo Bonzini: "Two fixes for s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix pfmf non-quiescing control handling KVM: s390: move kvm_guest_enter,exit closer to sie
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mv64xxx: Document the newly introduced allwinner compatible i2c: Fix Kontron PLD prescaler calculation i2c: i2c-mxs: Use DMA mode even for small transfers
-
- 10 Aug, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are assorted fixes, mostly from Josef nailing down xfstests runs. Zach also has a long standing fix for problems with readdir wrapping f_pos (or ctx->pos) These patches were spread out over different bases, so I rebased things on top of rc4 and retested overnight" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: don't loop on large offsets in readdir Btrfs: check to see if root_list is empty before adding it to dead roots Btrfs: release both paths before logging dir/changed extents Btrfs: allow splitting of hole em's when dropping extent cache Btrfs: make sure the backref walker catches all refs to our extent Btrfs: fix backref walking when we hit a compressed extent Btrfs: do not offset physical if we're compressed Btrfs: fix extent buffer leak after backref walking Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Stable patch for lockd to fix Oopses due to inappropriate calls to utsname()->nodename - Stable patches for sunrpc to fix Oopses on shutdown when using AF_LOCAL sockets with rpcbind - Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint - Fix a regression with the sync mount option failing to work for nfs4 mounts - Fix a writeback performance issue when doing cache invalidation - Remove an incorrect call to nfs_setsecurity in nfs_fhget * tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix up nfs4_proc_lookup_mountpoint NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget() NFSv4: Fix the sync mount option for nfs4 mounts NFS: Fix writeback performance issue on cache invalidation SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister SUNRPC: Don't auto-disconnect from the local rpcbind socket LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Some fixes for a 4.1 feature that in retrospect probably should have waited for 3.12.... But it appears to be working now" * 'for-3.11' of git://linux-nfs.org/~bfields/linux: nfsd: Fix SP4_MACH_CRED negotiation in EXCHANGE_ID nfsd4: Fix MACH_CRED NULL dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A couple of USB-audio fixes that should also go to stable kernels" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: do not trust too-big wMaxPacketSize values ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing huge, two IIO driver fixes, and a zcache fix. All of these have been in linux-next for a while" * tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: zcache: fix "zcache=" kernel parameter iio: ti_am335x_adc: Fix wrong samples received on 1st read iio:trigger: Fix use_count race condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are 3 small USB fixes for 3.11-rc5. One is a fix that the ChromeOS developers ran into on some Intel hardware, one is a build fix, and the last is a MAINTAINERS update to help people figure out where to send USB network driver patches. All of these have been in linux-next for a while" * tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: MAINTAINERS: Add separate section for USB NETWORKING DRIVERS usb: xhci: add missing dma-mapping.h includes usb: core: don't try to reset_device() a port that got just disconnected
-
- 09 Aug, 2013 25 commits
-
-
Zach Brown authored
When btrfs readdir() hits the last entry it sets the readdir offset to a huge value to stop buggy apps from breaking when the same name is returned by readdir() with concurrent rename()s. But unconditionally setting the offset to INT_MAX causes readdir() to loop returning any entries with offsets past INT_MAX. It only takes a few hours of constant file creation and removal to create entries past INT_MAX. So let's set the huge offset to LLONG_MAX if the last entry has already overflowed 32bit loff_t. Without large offsets behaviour is identical. With large offsets 64bit apps will work and 32bit apps will be no more broken than they currently are if they see large offsets. Signed-off-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
A user reported a panic when running with autodefrag and deleting snapshots. This is because we could end up trying to add the root to the dead roots list twice. To fix this check to see if we are empty before adding ourselves to the dead roots list. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
The ceph guys tripped over this bug where we were still holding onto the original path that we used to copy the inode with when logging. This is based on Chris's fix which was reported to fix the problem. We need to drop the paths in two cases anyway so just move the drop up so that we don't have duplicate code. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
I noticed while running multi-threaded fsync tests that sometimes fsck would complain about an improper gap. This happens because we fail to add a hole extent to the file, which was happening when we'd split a hole EM because btrfs_drop_extent_cache was just discarding the whole em instead of splitting it. So this patch fixes this by allowing us to split a hole em properly, which means that added holes actually get logged properly and we no longer see this fsck error. Thankfully we're tolerant of these sort of problems so a user would not see any adverse effects of this bug, other than fsck complaining. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
Because we don't mess with the offset into the extent for compressed we will properly find both extents for this case [extent a][extent b][rest of extent a] but because we already added a ref for the front half we won't add the inode information for the second half. This causes us to leak that memory and not print out the other offset when we do logical-resolve. So fix this by calling ulist_add_merge and then add our eie to the existing entry if there is one. With this patch we get both offsets out of logical-resolve. With this and the other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo set. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
If you do btrfs inspect-internal logical-resolve on a compressed extent that has been partly overwritten it won't find anything. This is because we try and match the extent offset we've searched for based on the extent offset in the data extent entry. However this doesn't work for compressed extents because the offsets are for the uncompressed size, not the compressed size. So instead only do this check if we are not compressed, that way we can get an actual entry for the physical offset rather than nothing for compressed. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
xfstest btrfs/276 was freaking out on slower boxes partly because fiemap was offsetting the physical based on the extent offset. This is perfectly fine with uncompressed extents, however the extent offset is into the uncompressed area, not the compressed. So we can return a physical value that isn't at all within the area we have allocated on disk. Fix this by returning the start of the extent if it is compressed no matter what the offset. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
commit 47fb091f(Btrfs: fix unlock after free on rewinded tree blocks) takes an extra increment on the reference of allocated dummy extent buffer, so now we cannot free this dummy one, and end up with extent buffer leak. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
For partial extents, snapshot-aware defrag does not work as expected, since a) we use the wrong logical offset to search for parents, which should be disk_bytenr + extent_offset, not just disk_bytenr, b) 'offset' returned by the backref walking just refers to key.offset, not the 'offset' stored in btrfs_extent_data_ref which is (key.offset - extent_offset). The reproducer: $ mkfs.btrfs sda $ mount sda /mnt $ btrfs sub create /mnt/sub $ for i in `seq 5 -1 1`; do dd if=/dev/zero of=/mnt/sub/foo bs=5k count=1 seek=$i conv=notrunc oflag=sync; done $ btrfs sub snap /mnt/sub /mnt/snap1 $ btrfs sub snap /mnt/sub /mnt/snap2 $ sync; btrfs filesystem defrag /mnt/sub/foo; $ umount /mnt $ btrfs-debug-tree sda (Here we can check whether the defrag operation is snapshot-awared. This addresses the above two problems. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Jie Liu authored
Create a small file and fallocate it to a big size with FALLOC_FL_KEEP_SIZE option, then truncate it back to the small size again, the disk free space is not changed back in this case. i.e, total 4 -rw-r--r-- 1 root root 512 Jun 28 11:35 test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt -rw-r--r-- 1 root root 512 Jun 28 11:35 /mnt/test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt With this fix, the truncated up space is back as: Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - ACPI-based memory hotplug stopped working after a recent change, because it's not possible to associate sufficiently many "physical" devices with one ACPI device object due to an artificial limit. Fix from Rafael J Wysocki removes that limit and makes memory hotplug work again. - A change made in 3.9 uncovered a bug in the ACPI processor driver preventing NUMA nodes from being put offline due to an ordering issue. Fix from Yasuaki Ishimatsu changes the ordering to make things work again. - One of the recent ACPI video commits (that hasn't been reverted so far) uncovered a bug in the code handling quirky BIOSes that caused some Asus machines to boot with backlight completely off which made it quite difficult to use them afterward. Fix from Felipe Contreras improves the quirk to cover this particular case correctly. - A cpufreq user space interface change made in 3.10 inadvertently renamed the ignore_nice_load sysfs attribute to ignore_nice which resulted in some confusion. Fix from Viresh Kumar changes the name back to ignore_nice_load. - An initialization ordering change made in 3.9 broke cpufreq on loongson2 boards. Fix from Aaro Koskinen restores the correct initialization ordering there. - Fix breakage resulting from a mistake made in 3.9 and causing the detection of some graphics adapters (that were detected correctly before) to fail. There are two objects representing the same PCIe port in the affected systems' ACPI tables and both appear as "enabled" and we are expected to guess which one to use. We used to choose the right one before by pure luck, but when we tried to address another similar corner case, the luck went away. This time we try to make our guessing a bit more educated which is reported to work on those systems. - The /proc/acpi/wakeup interface code is missing some locking which may lead to breakage if that file is written or read during hotplug of wakeup devices. That should be rare but still possible, so it's better to start using the appropriate locking there. * tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Try harder to resolve _ADR collisions for bridges cpufreq: rename ignore_nice as ignore_nice_load cpufreq: loongson2: fix regression related to clock management ACPI / processor: move try_offline_node() after acpi_unmap_lsapic() ACPI: Drop physical_node_id_bitmap from struct acpi_device ACPI / PM: Walk physical_node_list under physical_node_lock ACPI / video: improve quirk check in acpi_video_bqc_quirk()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fix from Guenter Roeck: "Fix bug in adt7470 driver which causes it to fail writing fan speed limits" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adt7470) Fix incorrect return code check
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and a fix for media DocBook" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: fix dependency [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fix from Jiri Kosina: "Revert of a patch which breaks enumeration workaround in hid-logitech-dj" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: hid-logitech-dj: querying_devices was never set"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Mostly radeon, more fixes for dynamic power management which is is off by default for this release anyways, but there are a large number of testers, so I'd like to keep merging the fixes. Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915 regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix and one regression fix in the core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm: Don't pass negative delta to ktime_sub_ns() drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale ...
-
Oleg Nesterov authored
device_close()->recalc_sigpending() is not needed, sigprocmask() takes care of TIF_SIGPENDING correctly. And without ->siglock it is racy and wrong, it can wrongly clear TIF_SIGPENDING and miss a signal. But even with this patch device_close() is still buggy: 1. sigprocmask() should not be used, we have set_task_blocked(), but this is minor. 2. We should never block SIGKILL or SIGSTOP, and this is what the code tries to do. 3. This can't protect against SIGKILL or SIGSTOP anyway. Another thread can do signal_wake_up(), say, do_signal_stop() or complete_signal() or debugger. 4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears TIF_SIGPENDING, say, freezing() or ->jobctl. 5. device_write() looks equally wrong by the same reason. Looks like, this tries to protect some wait_event_interruptible() logic from signals, it should be turned into uninterruptible wait. Or we need to implement something like signals_stop/start for such a use-case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Kosina authored
This reverts commit 407a2c2a. Explanation provided by Benjamin Tissoires: Commit "HID: hid-logitech-dj, querying_devices was never set" activate a flag which guarantees that we do not ask the receiver for too many enumeration. When the flag is set, each following enumeration call is discarded (the usb request is not forwarded to the receiver). The flag is then released when the driver receive a pairing information event, which normally follows the enumeration request. However, the USB3 bug makes the driver think the enumeration request has been forwarded to the receiver. However, it is actually not the case because the USB stack returns -EPIPE. So, when a new unknown device appears, the workaround consisting in asking for a new enumeration is not working anymore: this new enumeration is discarded because of the flag, which is never reset. A solution could be to trigger a timeout before releasing it, but for now, let's just revert the patch. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Tested-by: Sune Mølgaard <sune@molgaard.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Michael Neuling authored
If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
POWER8 allows the DSCR to be accessed directly from userspace via a new SPR number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but like POWER7, is only accessible in HV and OS modes). Currently, we allow this by setting H/FSCR DSCR bit on boot. Unfortunately this doesn't work, as the kernel needs to see the DSCR change so that it knows to no longer restore the system wide version of DSCR on context switch (ie. to set thread.dscr_inherit). This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in facility_unavailable_exception(). We also change _switch() so that we set or clear the H/FSCR DSCR bit based on the thread.dscr_inherit. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This is needed for a subsequent patch to fix the userspace DSCR handling. HFSCR and FSCR bit definitions are the same, so reuse them. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we mark it as an OS facility unavaliable (0xf60) as the two share the same code path. The becomes a problem in facility_unavailable_exception() as we aren't able to see the hypervisor facility unavailable exceptions. Below fixes this by duplication the required macros. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thadeu Lima de Souza Cascardo authored
err was overwritten by a previous function call, and checked to be 0. If the following page allocation fails, 0 is going to be returned instead of -ENOMEM. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Chen Gang authored
'rmls' is 'unsigned long', lpcr_rmls() will return negative number when failure occurs, so it need a type cast for comparing. 'lpid' is 'unsigned long', kvmppc_alloc_lpid() return negative number when failure occurs, so it need a type cast for comparing. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-