- 18 Jun, 2013 11 commits
-
-
Tomasz Figa authored
Contents of this header are not used any more and can be safely removed. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Tomasz Figa authored
This patch removes mach/gpio.h header that is not required any more on Exynos. Signed-off-by:
-
Tomasz Figa authored
Now since SAMSUNG_ATAGS is no longer selected for ARCH_EXYNOS, we can safely remove the remaining setup code. Signed-off-by:
-
Tomasz Figa authored
This patch removes selection of several legacy Kconfig symbols from ARCH_EXYNOS to bypass compilation of code used only for ATAGS based boot. Signed-off-by:
-
Tomasz Figa authored
Since it is illegal to include mach/ headers from source files outside of respective mach-* directory and DT-only Samsung platforms might not have all of them anyway, this patches makes inclusion of them conditional, based on CONFIG_SAMSUNG_ATAGS. Signed-off-by:
-
Tomasz Figa authored
After removing support for ATAGS based boot on Exynos, there is not much that can be shared between Exynos and other S5P platforms. This patch makes Exynos a standalone Samsung platform, not using PLAT_S5P. Signed-off-by:
-
Tomasz Figa authored
ARCH_EXYNOS is going to be excluded from PLAT_S5P, so it must be checked separately in Exynos-related Kconfig entries. Signed-off-by:
-
Tomasz Figa authored
ARCH_EXYNOS is going to be excluded from PLAT_S5P, so it must be checked separately in Exynos-related Kconfig entries. Cc: linux-media@vger.kernel.org Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kamil Debski <k.debski@samsung.com> Cc: Tomasz Stanislawski <t.stanislaws@samsung.com> Cc: Jeongtae Park <jtp.park@samsung.com> Signed-off-by:
-
Tomasz Figa authored
This patch adds new Kconfig symbols, SAMSUNG_PM_GPIO and S5P_IRQ_PM that get enabled when GPIO_SAMSUNG, PM and S5P_PM are enabled, but only if SAMSUNG_ATAGS is selected. Signed-off-by:
-
Tomasz Figa authored
This patch adds several compatibility definitions that are not relevant for Exynos, but are required by Samsung PM core. Signed-off-by:
-
Tomasz Figa authored
This patch adds Kconfig entry that selects whether legacy Samsung GPIO driver should be built or not. For platforms that support only DT based boot, the new pinctrl driver is used and so the old one is not needed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 15 Jun, 2013 13 commits
-
-
Tomasz Figa authored
This patch removes static definitions of power domains and code responsible for registering them and adding devices to them, since only DT based boot is now supported on Exynos. Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Tomasz Figa authored
This patch makes the firmware setup code assume presence of DT, since it is now the only way of booting supported for Exynos. Signed-off-by:
-
Tomasz Figa authored
This patch removes static mapping of chip ID block that was used when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy platform device initialization code that was used to set names and other parameters of static platform devices when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy timer initialization code that was used to set up system timers when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy IRQ initialization code that was used to set up interrupt handling when booting with ATAGS, which is not supported any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes now unused files containing old device and GPIO setup code that was needed for ATAGS based boot, which is not supported on Exynos any more. The only exception is setup-i2c0.c that will be removed later, since it has dependencies in plat-samsung/ directory. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy UART initialization code that was used to set up UART platform devices when booting with ATAGS, which is not supported on Exynos any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy EINT initialization code that was used to handle external interrupts when booting with ATAGS, which is not supported any more. Signed-off-by:
-
Tomasz Figa authored
This patch removes legacy PMU initialization code that was used to set up PMU when booting with ATAGS, which is not supported any more. Signed-off-by:
-
Tomasz Figa authored
This patch adds a Kconfig entry that enables compilation of legacy support code required for Samsung platforms that require ATAGS based boot. This allows to bypass compilation of this code when platforms without ATAGS support are selected. Signed-off-by:
-
Tomasz Figa authored
Since EXYNOS is now DT-only, it always requires USE_OF option to be selected. This patch moves USE_OF selection from entries of DT board files to ARCH_EXYNOS. Signed-off-by:
-
Tomasz Figa authored
Since commit 383ffda2 ARM: EXYNOS: no more support non-DT for EXYNOS SoCs all non-DT Exynos board files are not used anymore. This patch removes them. Signed-off-by:
-
- 10 Jun, 2013 1 commit
-
-
Kukjin Kim authored
As we discussed in mailing list, non-DT for EXYNOS SoCs will not be supported from v3.11. This patch removes regarding files for non-DT including board files and defconfig. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-off-by:
-
- 09 Jun, 2013 2 commits
-
-
Linus Torvalds authored
-
Mikulas Patocka authored
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by:Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Jun, 2013 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
-
Grant Likely authored
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by:Grant Likely <grant.likely@linaro.org>
-
Linus Walleij authored
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Chen Gang authored
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Arnd Bergmann authored
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "MIPS fixes across the field. The only area that's standing out is the exception handling which received it's dose of breakage as part of the microMIPS patchset" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: add missing SZ_1M multiplier MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIPS: OCTEON: Improve _machine_halt implementation. MIPS: rtlx: Fix implicit declaration of function set_vi_handler() MIPS: Trap exception handling fixes MIPS: Quit exposing Kconfig symbols in uapi headers. MIPS: Remove duplicate definition of check_for_high_segbits.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu fix from Greg Ungerer: "A single fix for compilation breakage to many of the ColdFire CPU targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: only use local gpio_request_one if not using GPIOLIB
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regression fixers for the big 3: - nouveau: hdmi audio, dac load detect, s/r regressions fixed - radeon: long standing system hang fixed, hdmi audio and rs780 fast fb fixes - intel: one old regression, a WARN removal, and a stop X dying fix Otherwise one mgag200 fix, a couple of arm build fixes, and a core use after free fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nv50/kms: use dac loadval from vbios, where it's available drm/nv50/disp: force dac power state during load detect drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix drm/nv84/disp: Fix HDMI audio regression drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. drm/radeon: don't allow audio on DCE6 drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) radeon: Fix system hang issue when using KMS with older cards drm/i915: no lvds quirk for hp t5740 drm/i915: Quirk the pipe A quirk in the modeset state checker drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus drm/mgag200: Add missing write to index before accessing data register drm/nouveau: use mdelay instead of large udelay constants drm/tilcd: select BACKLIGHT_LCD_SUPPORT drm: fix a use-after-free when GPU acceleration disabled -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Fix from Andy is for dmatest regression reported by Will and Rabin has fixed runtime ref counting for st_dma40" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmatest: do not allow to interrupt ongoing tests dmaengine: ste_dma40: fix pm runtime ref counting
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This contains 4 fixes. The first two fix the case where full RCU debugging is enabled, enabling function tracing causes a live lock of the system. This is due to the added debug checks in rcu_dereference_raw() that is used by the function tracer. These checks are also traced by the function tracer as well as cause enough overhead to the function tracer to slow down the system enough that the time to finish an interrupt can take longer than when the next interrupt is triggered, causing a live lock from the timer interrupt. Talking this over with Paul McKenney, we came up with a fix that adds a new rcu_dereference_raw_notrace() that does not perform these added checks, and let the function tracer use that. The third commit fixes a failed compile when branch tracing is enabled, due to the conversion of the trace_test_buffer() selftest that the branch trace wasn't converted for. The forth patch fixes a bug caught by the RCU lockdep code where a rcu_read_lock() is performed when rcu is disabled (either going to or from idle, or user space). This happened on the irqsoff tracer as it calls task_uid(). The fix here was to use current_uid() when possible that doesn't use rcu locking. Which luckily, is always used when irqsoff calls this code." * tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use current_uid() for critical time tracing tracing: Fix bad parameter passed in branch selftest ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
-
Rafael J. Wysocki authored
Commit 9f29ab11 ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by:
Tony Luck <tony.luck@gmail.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
