An error occurred fetching the project authors.
- 27 Jun, 2011 1 commit
-
-
Dmitry Eremin-Solenikov authored
fsl-lbc driver requires an interrupt to bind to localbus device. Populate 85xx boards' dts trees with lbc interrupt info. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 04 Aug, 2010 1 commit
-
-
Dmitry Eremin-Solenikov authored
Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X slot and add INTA/INTB mapping for PCMCIA bridge. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 19 May, 2009 3 commits
-
-
Kumar Gala authored
Between the addition of the ecm/mcm law nodes and the fact that the get_immrbase() has been using the range property of the SoC to determine the base address of CCSR space we no longer need the reg property at the soc node level. It has been ill specified and varied between device trees to cover either the {e,m}cm-law node, some odd subset of CCSR space or all of CCSR space. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 07 Apr, 2009 2 commits
-
-
Wolfgang Grandegger authored
For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Wolfgang Grandegger authored
Commit 0f73a449 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 06 Apr, 2009 1 commit
-
-
Wolfgang Grandegger authored
This patch adds multi-chip support for the Micron MT29F8G08FAB NAND flash memory on the TQM8548 modules. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
- 24 Mar, 2009 1 commit
-
-
Anton Vorontsov authored
Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 02 Feb, 2009 2 commits
-
-
Wolfgang Grandegger authored
Automatic I2C device probing is not done any more. Therefore we need proper DTS device node definitions for the I2C LM75 thermal sensor on the TQM85xx modules. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Wolfgang Grandegger authored
Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 16 Dec, 2008 1 commit
-
-
Andy Fleming authored
Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Aug, 2008 1 commit
-
-
Wolfgang Grandegger authored
Due to the missing compatible property for the SOC, the MPC I2C buses are not found any more. This patch fixes this issue. Furthermore it corrects the name of the SOC node and adds the missing I2C node for the RTC. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 14 Jul, 2008 1 commit
-
-
Wolfgang Grandegger authored
It adds the missing RTC node to tqm8548.dts and enables support for I2C, DS1307 and LM75 in the default configuration. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 27 Jun, 2008 1 commit
-
-
Kumar Gala authored
Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
- 10 Jun, 2008 1 commit
-
-
Wolfgang Grandegger authored
This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-