- 23 Nov, 2010 23 commits
-
-
Daniel Vetter authored
Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Daniel Vetter authored
Just some minor shuffling to get rid of any agp traces in the exported functions. Signed-off-by:
-
Daniel Vetter authored
No more drm_*_agp in i915_gem.c! Signed-off-by:
-
Daniel Vetter authored
Its only user, intel-gtt.c is now gone. Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Daniel Vetter authored
This still uses the agp functions to actually reinstate the mappings (with a gross hack to make agp cooperate), but it wires everything up correctly for the switchover. The call to agp_rebind_memory can be dropped because all non-kms drivers do all their rebinding on EnterVT. v2: Be more paranoid and flush the chipset cache after restoring gtt mappings. Signed-off-by:
-
Daniel Vetter authored
This is required to restore gtt mappings on resume when agp is gone. The right way to do this would be to make sturct drm_mm_node embeddable and use the allocation list maintained by the drm memory manager. But that's a bigger project. Getting rid of the per bo agp_mem will save more memory than this wastes, anyway. Signed-off-by:
-
Daniel Vetter authored
The intel drm calls the chipset functions now directly. Userspace never called the corresponding ioctl, hence it can be killed, too. Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Daniel Vetter authored
No longer used. Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
Daniel Vetter authored
... and a few other defines. Signed-off-by:
-
Daniel Vetter authored
Now the intel-gtt.c rewrite is complete! Signed-off-by:
-
Daniel Vetter authored
Still a separate agp_bridge_driver because of the i81x-only dedicated vram support. Signed-off-by:
-
Daniel Vetter authored
Initialization is still done with the old code with a few added things sprinkled in to make the intel_fake_agp helper functions work. Signed-off-by:
-
Daniel Vetter authored
Used for the now dead agp type_to_mask stuff. Signed-off-by:
-
Daniel Vetter authored
i830_check_flags already disallows it, so no need to implement it in the write_entry function. Seems to be a remnant from i810 support. Signed-off-by:
-
Chris Wilson authored
-
Chris Wilson authored
Currently if we hit a pagefault when applying a user relocation for the execbuffer, we bail and return EFAULT to the application. Instead, we need to unwind, drop the dev->struct_mutex, copy all the relocation entries to a vmalloc array (to avoid any potential circular deadlocks when resolving the pagefault), retake the mutex and then apply the relocations. Afterwards, we need to again drop the lock and copy the vmalloc array back to userspace. v2: Incorporate feedback from Daniel Vetter. Reported-by:
-
Chris Wilson authored
... and no need to perform a linear search for the index. Signed-off-by: -
Chris Wilson authored
Signed-off-by: -
Chris Wilson authored
Now that the stolen memory does not also steal entries from the GTT, we can use all the memory the BIOS set aside for the GPU. Signed-off-by: -
Chris Wilson authored
The GATT is a write-only set of registers, reading from them in the manner of i915_gtt_to_phys() is supposed to be undefined. However a simple solution exists as we allocate linear memory from the stolen area, we can simply add the block offset to the base register. As a side-effect we recover all the unused stolen GTT entries and so enlarge our aperture. Signed-off-by: -
Chris Wilson authored
After a GPU reset, the backlight controller registers may be also reset to 0. In that case we should restore those to the original values programmed by the BIOS. Note that we still lack the code to handle the case where the BIOS failed to program those registers at all... Signed-off-by: -
Chris Wilson authored
Signed-off-by:
-
- 22 Nov, 2010 10 commits
-
-
Chris Wilson authored
As we conflated intel_sdvo->is_hdmi with both having HDMI support on the ADD along with having HDMI support on the monitor, we would attempt to use HDMI encodings even if the interface did not support those commands. Reported-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by:
-
Keith Packard authored
We were reading our 64-bit value in I915_READ64 and returning 32 bits of it. The restoration of fence regs at resume then had a zero end value, and the fence had no effect. Version 2: Split register access functions into per-size versions Sharing code between different sizes seemed reasonable when we only needed a single copy, but as 64-bit access requires its own version, it makes sense to just split them out for each size. Reported-by:
Peter Clifton <pcjc2@cam.ac.uk> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Keith Packard <keithp@keithp.com> [ickle: use a macro to create the various read/write routines] Signed-off-by:
-
Eric Anholt authored
This has proven sufficient to recover from a hang of the GPU using the gem_bad_blit test while at the KMS console then starting X. When attempting the same during an X session, the timer doesn't appear to trigger. Signed-off-by:
-
Eric Anholt authored
Signed-off-by:
-
Eric Anholt authored
It isn't used for the hangcheck, which does its work right from the timer trigger, but hangcheck can lead to error state recording, which is run off of the workqueue. Signed-off-by:
-
Chris Wilson authored
-
Chris Wilson authored
Conflicts: drivers/gpu/drm/i915/i915_gem.c
-
Chris Wilson authored
-
Chris Wilson authored
When trying to diagnose mysterious errors on resume, capture the display register contents as well. Signed-off-by: -
Chris Wilson authored
The pinned buffers are useful for diagnosing errors in setting up state for the chipset, which may not necessarily be 'active' at the time of the error, e.g. the cursor buffer object. Signed-off-by:
-
- 21 Nov, 2010 3 commits
-
-
Linus Torvalds authored
-
Chris Wilson authored
Under KMS, restoring the cursor is handled upon modeswitch in order to avoid enabling an undefined set of registers. At the moment, the cursor is restored before the aperture and modes are fully setup causing some invalid access during resume, such as: PGTBL_ER: 0x00040000 Invalid GTT entry during Cursor Fetch Fix this by only performing cursor register save/restore under UMS where it is done in the correct sequence. Reported-by:Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by:
-
Chris Wilson authored
Commit 2549d6c2 removed the vmalloc used for temporary storage of the relocation lists used during execbuffer. However, our use of vmalloc was being protected by an integer overflow check which we do want to preserve! Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
- 20 Nov, 2010 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard fs: Do not dispatch FITRIM through separate super_operation ext4: ext4_fill_super shouldn't return 0 on corruption jbd2: fix /proc/fs/jbd2/<dev> when using an external journal ext4: missing unlock in ext4_clear_request_list() ext4: fix setting random pages PageUptodate
-
Lukas Czerner authored
Filesystem independent ioctl was rejected as not common enough to be in core vfs ioctl. Since we still need to access to this functionality this commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch ext4_trim_fs(). It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h and its definition is as follows. struct fstrim_range { __u64 start; __u64 len; __u64 minlen; } start - first Byte to trim len - number of Bytes to trim from start minlen - minimum extent length to trim, free extents shorter than this number of Bytes will be ignored. This will be rounded up to fs block size. After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling. Signed-off-by:Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Lukas Czerner authored
There was concern that FITRIM ioctl is not common enough to be included in core vfs ioctl, as Christoph Hellwig pointed out there's no real point in dispatching this out to a separate vector instead of just through ->ioctl. So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs from super_operation structure. Signed-off-by:
-
- 19 Nov, 2010 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix readdir EOVERFLOW on 32-bit archs ceph: fix frag offset for non-leftmost frags ceph: fix dangling pointer ceph: explicitly specify page alignment in network messages ceph: make page alignment explicit in osd interface ceph: fix comment, remove extraneous args ceph: fix update of ctime from MDS ceph: fix version check on racing inode updates ceph: fix uid/gid on resent mds requests ceph: fix rdcache_gen usage and invalidate ceph: re-request max_size if cap auth changes ceph: only let auth caps update max_size ceph: fix open for write on clustered mds ceph: fix bad pointer dereference in ceph_fill_trace ceph: fix small seq message skipping Revert "ceph: update issue_seq on cap grant"
-
