- 30 Mar, 2020 20 commits
-
-
Paolo Abeni authored
Keep the send page fragment on an MPTCP level retransmission queue. The queue entries are allocated inside the page frag allocator, acquiring an additional reference to the page for each list entry. Also switch to a custom page frag refill function, to ensure that the current page fragment can always host an MPTCP rtx queue entry. The MPTCP rtx queue is flushed at disconnect() and close() time Note that now we need to call __mptcp_init_sock() regardless of mptcp enable status, as the destructor will try to walk the rtx_queue. v2 -> v3: - remove 'inline' in foo.c files (David S. Miller) Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
So that we keep per unacked sequence number consistent; since we update per msk data, use an atomic64 cmpxchg() to protect against concurrent updates from multiple subflows. Initialize the snd_una at connect()/accept() time. Co-developed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Peter Krystad authored
Fill in more path manager functionality by adding a worker function and modifying the related stub functions to schedule the worker. Co-developed-by:
Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by:
-
Peter Krystad authored
Subflow creation may be initiated by the path manager when the primary connection is fully established and a remote address has been received via ADD_ADDR. Create an in-kernel sock and use kernel_connect() to initiate connection. Passive sockets can't acquire the mptcp socket lock at subflow creation time, so an additional list protected by a new spinlock is used to track the MPJ subflows. Such list is spliced into conn_list tail every time the msk socket lock is acquired, so that it will not interfere with data flow on the original connection. Data flow and connection failover not addressed by this commit. Co-developed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Peter Krystad authored
Process the MP_JOIN option in a SYN packet with the same flow as MP_CAPABLE but when the third ACK is received add the subflow to the MPTCP socket subflow list instead of adding it to the TCP socket accept queue. The subflow is added at the end of the subflow list so it will not interfere with the existing subflows operation and no data is expected to be transmitted on it. Co-developed-by:
-
Peter Krystad authored
Add enough of a path manager interface to allow sending of ADD_ADDR when an incoming MPTCP connection is created. Capable of sending only a single IPv4 ADD_ADDR option. The 'pm_data' element of the connection sock will need to be expanded to handle multiple interfaces and IPv6. Partial processing of the incoming ADD_ADDR is included so the path manager notification of that event happens at the proper time, which involves validating the incoming address information. This is a skeleton interface definition for events generated by MPTCP. Co-developed-by:
-
Peter Krystad authored
Add handling for sending and receiving the ADD_ADDR, ADD_ADDR6, and RM_ADDR suboptions. Co-developed-by:
-
Jacob Keller authored
A recent commit e8937681 ("devlink: prepare to support region operations") used the region_cr_space_str and region_fw_health_str variables as initializers for the devlink_region_ops structures. This can result in compiler errors: drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: error: initializer element is not constant .name = region_cr_space_str, ^ drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: note: (near initialization for ‘region_cr_space_ops.name’) drivers/net/ethernet/mellanox//mlx4/crdump.c:50:10: error: initializer element is not constant .name = region_fw_health_str, The variables were made to be "const char * const", indicating that both the pointer and data were constant. This was enough to resolve this on recent GCC (gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1) for this author). Unfortunately this is not enough for older compilers to realize that the variable can be treated as a constant expression. Fix this by introducing macros for the string and use those instead of the variable name in the region ops structures. Reported-by:
tanhuazhong <tanhuazhong@huawei.com> Fixes: e8937681 ("devlink: prepare to support region operations") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jacob Keller authored
The devlink-region.rst and ice-region.rst documentation files wrapped some lines within shell code blocks due to being longer than 80 lines. It was pointed out during review that wrapping these lines shouldn't be done. Fix these two rST files and remove the line wrapping on these shell command examples. Reported-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
René van Dorst authored
Convert the mt7530 switch driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by:
René van Dorst <opensource@vdorst.com> Tested-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Vladimir Oltean authored
It looks like the P/Q/R/S series supports some more counters, generically named "Ethernet statistics counter", which we were not printing. Add them. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Julian Wiedmann authored
Enable the L3 driver's IPv4 address notifier to watch for events on qeth devices that have been moved into a net namespace. We need to program those IPs into the HW just as usual, otherwise inbound traffic won't flow. Fixes: 6133fb1a ("[NETNS]: Disable inetaddr notifiers in namespaces other than initial.") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Cambda Zhu authored
The SKB_SGO_CB_OFFSET should be SKB_GSO_CB_OFFSET which means the offset of the GSO in skb cb. This patch fixes the typo. Fixes: 9207f9d4 ("net: preserve IP control block during GSO segmentation") Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by:
-
Yuval Basson authored
Calling queue_delayed_work concurrently with destroy_workqueue might race to an unexpected outcome - scheduled task after wq is destroyed or other resources (like ptt_pool) are freed (yields NULL pointer dereference). cancel_delayed_work prevents the race by cancelling the timer triggered for scheduling a new task. Fixes: 59ccf86f ("qed: Add driver infrastucture for handling mfw requests") Signed-off-by:
Denis Bolotin <dbolotin@marvell.com> Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Yuval Basson <ybason@marvell.com> Signed-off-by:
-
Denis Kirjanov authored
page pool API can be useful for non-DMA cases like xen-netfront driver so let's allow to pass zero flags to page pool flags. v2: check DMA direction only if PP_FLAG_DMA_MAP is set Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jian Yang authored
For historical reasons, there are several timestamping selftest targets in selftests/networking/timestamping. Move them to the standard directory for networking tests: selftests/net. Signed-off-by:
Jian Yang <jianyang@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Philippe Schenker authored
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY too, use rgmii-id. For the now used KSZ9031 nothing will change, as rgmii-id is only implemented and supported by the KSZ9131. Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by:
-
Philippe Schenker authored
The KSZ9131 provides DLL controlled delays on RXC and TXC lines. This patch makes use of those delays. The information which delays should be enabled or disabled comes from the interface names, documented in ethernet-controller.yaml: rgmii: Disable RXC and TXC delays rgmii-id: Enable RXC and TXC delays rgmii-txid: Enable only TXC delay, disable RXC delay rgmii-rxid: Enable onlx RXC delay, disable TXC delay Signed-off-by:
-
Mark Starovoytov authored
This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Minor comment conflict in mac80211. Signed-off-by:
-
- 29 Mar, 2020 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge vm fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/sparse: fix kernel crash with pfn_section_valid check mm: fork: fix kernel_stack memcg stats for various stack implementations hugetlb_cgroup: fix illegal access to memory drivers/base/memory.c: indicate all memory blocks as removable mm/swapfile.c: move inode_lock out of claim_swapfile
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for the Hyper-V clocksource driver to make sched clock actually return nanoseconds and not the virtual clock value which increments at 10e7 HZ (100ns)" * tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single bugfix to prevent reference leaks in irq affinity notifiers" * tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix reference leaks on irq affinity notifiers
-
Aneesh Kumar K.V authored
Fix the crash like this: BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000c3447c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1 ... NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0 LR [c000000000088354] vmemmap_free+0x144/0x320 Call Trace: section_deactivate+0x220/0x240 __remove_pages+0x118/0x170 arch_remove_memory+0x3c/0x150 memunmap_pages+0x1cc/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x2f8/0x3e0 device_release_driver_internal+0x168/0x270 unbind_store+0x130/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x68/0x80 kernfs_fop_write+0x100/0x290 __vfs_write+0x3c/0x70 vfs_write+0xcc/0x240 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The crash is due to NULL dereference at test_bit(idx, ms->usage->subsection_map); due to ms->usage = NULL in pfn_section_valid() With commit d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after depopulate_section_mem(). This was done so that pfn_page() can work correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that config pfn_to_page does __section_mem_map_addr(__sec) + __pfn; where static inline struct page *__section_mem_map_addr(struct mem_section *section) { unsigned long map = section->section_mem_map; map &= SECTION_MAP_MASK; return (struct page *)map; } Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is used to check the pfn validity (pfn_valid()). Since section_deactivate release mem_section->usage if a section is fully deactivated, pfn_valid() check after a subsection_deactivate cause a kernel crash. static inline int pfn_valid(unsigned long pfn) { ... return early_section(ms) || pfn_section_valid(ms, pfn); } where static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn) { int idx = subsection_map_index(pfn); return test_bit(idx, ms->usage->subsection_map); } Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is freed. For architectures like ppc64 where large pages are used for vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple sections. Hence before a vmemmap mapping page can be freed, the kernel needs to make sure there are no valid sections within that mapping. Clearing the section valid bit before depopulate_section_memap enables this. [aneesh.kumar@linux.ibm.com: add comment] Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com Fixes: d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") Reported-by:Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Wei Yang <richard.weiyang@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the space for task stacks can be allocated using __vmalloc_node_range(), alloc_pages_node() and kmem_cache_alloc_node(). In the first and the second cases page->mem_cgroup pointer is set, but in the third it's not: memcg membership of a slab page should be determined using the memcg_from_slab_page() function, which looks at page->slab_cache->memcg_params.memcg . In this case, using mod_memcg_page_state() (as in account_kernel_stack()) is incorrect: page->mem_cgroup pointer is NULL even for pages charged to a non-root memory cgroup. It can lead to kernel_stack per-memcg counters permanently showing 0 on some architectures (depending on the configuration). In order to fix it, let's introduce a mod_memcg_obj_state() helper, which takes a pointer to a kernel object as a first argument, uses mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls mod_memcg_state(). It allows to handle all possible configurations (CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without spilling any memcg/kmem specifics into fork.c . Note: This is a special version of the patch created for stable backports. It contains code from the following two patches: - mm: memcg/slab: introduce mem_cgroup_from_obj() - mm: fork: fix kernel_stack memcg stats for various stack implementations [guro@fb.com: introduce mem_cgroup_from_obj()] Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com Fixes: 4d96ba35 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by:
Roman Gushchin <guro@fb.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.comSigned-off-by:
-
Mina Almasry authored
This appears to be a mistake in commit faced7e0 ("mm: hugetlb controller for cgroups v2"). Essentially that commit does a hugetlb_cgroup_from_counter assuming that page_counter_try_charge has initialized counter. But if that has failed then it seems will not initialize counter, so hugetlb_cgroup_from_counter(counter) ends up pointing to random memory, causing kasan to complain. The solution is to simply use 'h_cg', instead of hugetlb_cgroup_from_counter(counter), since that is a reference to the hugetlb_cgroup anyway. After this change kasan ceases to complain. Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2") Reported-by: syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com Signed-off-by:
Mina Almasry <almasrymina@google.com> Signed-off-by:
Giuseppe Scrivano <gscrivan@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.comSigned-off-by:
-
David Hildenbrand authored
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9f ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.comReported-by:
"Scargall, Steve" <steve.scargall@intel.com> Suggested-by:
Michal Hocko <mhocko@kernel.org> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Nathan Fontenot <ndfont@gmail.com> Acked-by:
-
Naohiro Aota authored
claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by:Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
Qais Youef <qais.yousef@arm.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in vti6, from Torsten Hilbrich. 2) Fix double free in xfrm_policy_timer, from YueHaibing. 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from Johannes Berg. 4) Wrong allocation failure check in qlcnic driver, from Xu Wang. 5) Get ks8851-ml IO operations right, for real this time, from Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits) r8169: fix PHY driver check on platforms w/o module softdeps net: ks8851-ml: Fix IO operations, again mlxsw: spectrum_mr: Fix list iteration in error path qlcnic: Fix bad kzalloc null test mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX mac80211: mark station unauthorized before key removal mac80211: Check port authorization in the ieee80211_tx_dequeue() case cfg80211: Do not warn on same channel at the end of CSA mac80211: drop data frames without key on encrypted links ieee80211: fix HE SPR size calculation nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type xfrm: policy: Fix doulbe free in xfrm_policy_timer bpf: Explicitly memset some bpf info structures declared on the stack bpf: Explicitly memset the bpf_attr structure bpf: Sanitize the bpf_struct_ops tcp-cc name vti6: Fix memory leak of skb if input policy check fails esp: remove the skb from the chain when it's enqueued in cryptd_wq ipv6: xfrm6_tunnel.c: Use built-in RCU list checking xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire xfrm: fix uctx len check in verify_sec_ctx_len ...
-
- 28 Mar, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Three more driver bugfixes, and two doc improvements fixing build warnings while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pca-platform: Use platform_irq_get_optional i2c: st: fix missing struct parameter description i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status() i2c: fix a doc warning i2c: hix5hd2: add missed clk_disable_unprepare in remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to try to cope with USB enclosures that silently change reported parameters" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Fix optimal I/O size for devices that change reported values scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted
-
Chris Packham authored
The interrupt is not required so use platform_irq_get_optional() to avoid error messages like i2c-pca-platform 22080000.i2c: IRQ index 0 not found Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Alain Volmat authored
Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by:
Alain Volmat <avolmat@me.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
- 27 Mar, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-03-27 The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 4 day(s) which contain a total of 4 files changed, 25 insertions(+), 20 deletions(-). The main changes are: 1) Explicitly memset the bpf_attr structure on bpf() syscall to avoid having to rely on compiler to do so. Issues have been noticed on some compilers with padding and other oddities where the request was then unexpectedly rejected, from Greg Kroah-Hartman. 2) Sanitize the bpf_struct_ops TCP congestion control name in order to avoid problematic characters such as whitespaces, from Martin KaFai Lau. ==================== Signed-off-by: -
David S. Miller authored
Vladimir Oltean says: ==================== Configure the MTU on DSA switches This series adds support for configuring the MTU on front-panel switch ports, while seamlessly adapting the CPU port and the DSA master to the largest value plus the tagger overhead. It also implements bridge MTU auto-normalization within the DSA core, as resulted after the feedback of the implementation of this feature inside the bridge driver in v2. Support was added for quite a number of switches, in the hope that this series would gain some traction: - sja1105 - felix - vsc73xx - b53 and rest of the platform V3 of this series was submitted here: https://patchwork.ozlabs.org/cover/1262394/ V2 of this series was submitted here: https://patchwork.ozlabs.org/cover/1261471/ V1 of this series was submitted here: https://patchwork.ozlabs.org/cover/1199868/ ==================== Signed-off-by:
-
Vladimir Oltean authored
Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Instead of hardcoding the MTU to the maximum value allowed by the hardware, obey the value known by the operating system. Signed-off-by:
-
Vladimir Oltean authored
On this switch, the frame length enforcements are performed by the ingress policers. There are 2 types of those: regular L2 (also called best-effort) and Virtual Link policers (an ARINC664/AFDX concept for defining L2 streams with certain QoS abilities). To avoid future confusion, I prefer to call the reset reason "Best-effort policers", even though the VL policers are not yet supported. We also need to change the setup of the initial static config, such that DSA calls to .change_mtu (which are expensive) become no-ops and don't reset the switch 5 times. A driver-level decision is to unconditionally allow single VLAN-tagged traffic on all ports. The CPU port must accept an additional VLAN header for the DSA tag, which is again a driver-level decision. The policers actually count bytes not only from the SDU, but also from the Ethernet header and FCS, so those need to be accounted for as well. Signed-off-by:
-
Murali Krishna Policharla authored
It looks like the Broadcom switches supported by the b53 driver don't support precise configuration of the MTU, but just a mumbo-jumbo boolean flag. Set that. Also configure BCM583XX devices to send and receive jumbo frames when ports are configured with 10/100 Mbps speed. Signed-off-by:
Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by:
-
