Skip to content

L
linux
Switch branch/tag
  1. 19 Feb, 2019 2 commits
  3. 16 Feb, 2019 5 commits
  5. 15 Feb, 2019 5 commits
  7. 14 Feb, 2019 7 commits
  9. 13 Feb, 2019 4 commits
  11. 11 Feb, 2019 14 commits
  13. 09 Feb, 2019 3 commits
    • Doug Ledford's avatar
      Merge branch 'wip/dl-for-next' into for-next · 82771f20
      Doug Ledford authored 
      Due to concurrent work by myself and Jason, a normal fast forward merge
was not possible.  This brings in a number of hfi1 changes, mainly the
hfi1 TID RDMA support (roughly 10,000 LOC change), which was reviewed
and integrated over a period of days.
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      82771f20
    • Doug Ledford's avatar
      Merge branch 'hfi1-tid' into wip/dl-for-next · 416fbc1b
      Doug Ledford authored 
      Omni-Path TID RDMA Feature

Intel Omni-Path (OPA) TID RDMA support is a feature that accelerates
data movement between two OPA nodes through the IB Verbs interface. It
improves RDMA READ/WRITE performance by delivering the data payload to a
user buffer directly without any software copying.

Architecture
=============
The TID RDMA protocol is implemented on the hfi1 driver level and is
therefore transparent to the ULPs. It is designed to facilitate the data
transactions for two specific RDMA requests:
  - RDMA READ;
  - RDMA WRITE.
Previously, when a verbs data packet is received at the destination
(requester side for RDMA READ and responder side for RDMA WRITE), the
data payload is copied to the user buffer by software, which slows down
the performance significantly for large requests.

Internally, hfi1 converts qualified RDMA READ/WRITE requests into TID
RDMA READ/WRITE requests when the requests are post sent to the hfi1
driver. Non-qualified RDMA requests are handled by normal RDMA protocol.

For TID RDMA requests, hardware resources (hardware flow and TID entries)
are allocated on the destination side (the requester side for TID RDMA
READ and the responder side for TID RDMA WRITE). The information for
these resources is conveyed to the data source side (the responder side
for TID RDMA READ and the requester side for TID RDMA WRITE) and embedded
in data packets. When data packets are received by the destination,
hardware will deliver the data payload to the destination buffer without
involving software and therefore improve the performance.

Details
=======
RDMA READ/WRITE requests are qualified by the following:
  - Total data length >= 256k;
  - Totoal data length is a multiple of 4K pages.

Additional qualifications are enforced for the destination buffers:
  For RDMA RAED:
    - Each destination sge buffer is 4K aligned;
    - Each destination sge buffer is a multiple of 4K pages.
  For RDMA WRITE:
    - The destination number is 4K aligned.

In addition, in an OPA fabric, some nodes may support TID RDMA while
others may not. As such, it is important for two transaction nodes to
exchange the information about the features they support. This discovery
mechanism is called OPA Feature Negotion (OPFN) and is described in
details in the patch series. Through OPFN, two nodes can find whether
they both support TID RDMA and subsequently convert RDMA requests into
TID RDMA requests.

* hfi1-tid: (46 commits)
  IB/hfi1: Prioritize the sending of ACK packets
  IB/hfi1: Add static trace for TID RDMA WRITE protocol
  IB/hfi1: Enable TID RDMA WRITE protocol
  IB/hfi1: Add interlock between TID RDMA WRITE and other requests
  IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbs
  IB/hfi1: Add the dual leg code
  IB/hfi1: Add the TID second leg ACK packet builder
  IB/hfi1: Add the TID second leg send packet builder
  IB/hfi1: Resend the TID RDMA WRITE DATA packets
  IB/hfi1: Add a function to receive TID RDMA RESYNC packet
  IB/hfi1: Add a function to build TID RDMA RESYNC packet
  IB/hfi1: Add TID RDMA retry timer
  IB/hfi1: Add a function to receive TID RDMA ACK packet
  IB/hfi1: Add a function to build TID RDMA ACK packet
  IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet
  IB/hfi1: Add a function to build TID RDMA WRITE DATA packet
  IB/hfi1: Add a function to receive TID RDMA WRITE response
  IB/hfi1: Add TID resource timer
  IB/hfi1: Add a function to build TID RDMA WRITE response
  IB/hfi1: Add functions to receive TID RDMA WRITE request
  ...
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      416fbc1b
    • Raju Rangoju's avatar
      iw_cxgb4: fix srqidx leak during connection abort · f368ff18
      Raju Rangoju authored 
      When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().

c4iw_ep_disconnect() does the following:
 1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
 2. sends abort request CPL to hw.

But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().

This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl().  So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.
Signed-off-by: default avatarRaju Rangoju <rajur@chelsio.com>
Signed-off-by: default avatarJason Gunthorpe <jgg@mellanox.com>
      f368ff18
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7