- 10 Jan, 2006 18 commits
-
-
Paul Mackerras authored
<asm/systemcfg.h> is gone now, and the PCI error recovery constants in include/linux/pci.h changed their names in the process of getting accepted. Signed-off-by:Paul Mackerras <paulus@samba.org> (cherry picked from 5a2516156c591fc3d2059fbd93f97e15eb6010d6 commit)
-
Linas Vepstas authored
242-eeh-no-percpu-counters.patch Remove per-cpu counters from the EEH code. These statistics counters are incremented at a very low frequency, and the performance gains of per-cpu variables are negligable. By contrast, the counters weren't safe against cpu off/online operations, and its not worth the effort to make them so (other than to turn them into plain globals). Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Linas Vepstas authored
241-eeh-save-bars-earlier.patch Save the PCI device bars *before* any PCI probing is done. Signed-off-by:
-
Linas Vepstas authored
240-ioremap-null-ptr-test.patch Under highly unusual circumstances, a buggy driver will ask a null ptr to be ioremapped, an operation that curently succeeds but leads to later trouble. Instead, refuse to remap the null pointer. Signed-off-by:
-
Linas Vepstas authored
239-eeh-multifunction-consolidate.patch New-style firmware will often place multiple different functions under a non-EEH-aware parent. However, these devices might share a common PE "partition endpoint" and config address, ad thus any EEH events will affect all of the devices in common. This patch makes the effort to find all of these common devices and handle them together. Signed-off-by:
-
Linas Vepstas authored
238-eeh-stop-if-reset_failed.patch If the firmware is unable to reset the PCI slot for some reason, then don't attempt any further recovery steps after that point. Instead, mark the device as permanently failed. Signed-off-by:
-
Linas Vepstas authored
237-eeh-bridge-token.patch Minor: the rtas-bridge token should be set up the same way that all the other rtas tokens are set up. Signed-off-by:
-
Linas Vepstas authored
236-eeh-config-addr.patch The PE configuration address wasn't being cnsistently used in all locations where a config address is called for. This patch adds it to the places it should have appeared in. Signed-off-by:
-
Linas Vepstas authored
235-eeh-set-pcidev-bugfix.patch The pci device field of the pci_dn struct should be initialized to a valid value. Signed-off-by:
-
Linas Vepstas authored
234-eeh-find-pe.patch The find_device_pe() routine is duplicated in two files. Remove one of the two copies, declare the other extern. Signed-off-by:
-
Linas Vepstas authored
233-eeh-buid-fix.patch Remove un-desired warning print from EEH code. Signed-off-by:
-
Linas Vepstas authored
26-eeh-partition-endpoint.patch New versions of firmware introduce a new method by which the "partitionable endpoint" (the point at which the pci bus is cut) should be located. This code adds the support for this (mandatory) new feature. Signed-off-by:
-
Linas Vepstas authored
25-pci-address-cache.patch The core EEH file is rather large. This patch splits out a self-contained chunk of it into its own file. This is the chunk that performes the caching and lookup of pci devices based on the i/o addresses of thier resoures. This code is almos architecture-independent and could be used by any system that wanted to find a pci device based only on the i/o address used by the device. Signed-off-by:
-
Linas Vepstas authored
Various PCI bus errors can be signaled by newer PCI controllers. The core error recovery routines are architecture dependent. This patch adds a recovery infrastructure for the PPC64 pSeries systems. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
-
Oleg Nesterov authored
I think it is better to set ->next_pending in the caller, when it is needed. This saves one parameter, and this coincides with cpu_quiet() beahaviour, which sets ->completed = ->cur itself. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 09 Jan, 2006 22 commits
-
-
Ingo Molnar authored
convert the block loop device from semaphores to completions. Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Aleksey Makarov authored
The patch changes semaphores that are initialized as locked to complete(). Source: MontaVista Software, Inc. Modified-by:
Steven Rostedt <rostedt@goodmis.org> The following patch is from Montavista. I modified it slightly. Semaphores are currently being used where it makes more sense for completions. This patch corrects that. Signed-off-by:
Aleksey Makarov <amakarov@ru.mvista.com> Signed-off-by:
-
Steven Rostedt authored
change CPU3WDT semaphores to completions. Signed-off-by: -
Steven Rostedt authored
change SX8 semaphores to completions. Signed-off-by: -
Ingo Molnar authored
This patch converts the superblock-lock semaphore to a mutex, affecting lock_super()/unlock_super(). Tested on ext3 and XFS. Signed-off-by: -
Jes Sorensen authored
This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Jes Sorensen authored
This patch switches XFS over to use the new mutex code directly as opposed to the previous workaround patch I posted earlier that avoided the namespace clash by forcing it back to semaphores. This falls in the 'works for me<tm>' category. Signed-off-by:
Jes Sorensen <jes@trained-monkey.org> Signed-off-by:
-
Ingo Molnar authored
more mutex debugging: check for held locks during memory freeing, task exit, enable sysrq printouts, etc. Signed-off-by:
Arjan van de Ven <arjan@infradead.org>
-
Ingo Molnar authored
mutex implementation - add debugging code. Signed-off-by:
-
Ingo Molnar authored
Add mutex design related documentation. Signed-off-by:
-
Ingo Molnar authored
mutex implementation, core files: just the basic subsystem, no users of it. Signed-off-by:
-
Arjan van de Ven authored
add the per-arch mutex.h files for the remaining architectures. We default to asm-generic/mutex-dec.h, because that performs quite well on most arches. Arches that do not have atomic decrement/increment instructions should switch to mutex-xchg.h instead. Arches can also provide their own implementation for the mutex fastpath primitives. Signed-off-by:
-
Nicolas Pitre authored
add the ARM version of mutex.h, which is optimized in assembly for ARMv6, and uses the xchg implementation on pre-ARMv6. Signed-off-by: -
Ingo Molnar authored
add the x86_64 version of mutex.h, optimized in assembly. Signed-off-by:
-
Arjan van de Ven authored
add the i386 version of mutex.h, optimized in assembly. Signed-off-by:
-
Ingo Molnar authored
Add three (generic) mutex fastpath implementations. The mutex-xchg.h implementation is atomic_xchg() based, and should work fine on every architecture. The mutex-dec.h implementation is atomic_dec_return() based - this one too should work on every architecture, but might not perform the most optimally on architectures that have no atomic-dec/inc instructions. The mutex-null.h implementation forces all calls into the slowpath. This is used for mutex debugging, but it can also be used on platforms that do not want (or need) a fastpath at all. Signed-off-by:
-
Chuck Ebbert authored
add typecheck_fn(type, function) to do type-checking of function pointers. Modified-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Ingo Molnar authored
add atomic_xchg() to all the architectures. Needed by the new mutex code. Signed-off-by:
-
Jesper Juhl authored
Here's a small patch with a few tiny fixups for the EHCI Kconfig help text. Please consider applying. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
Adrian Bunk <bunk@stusta.de>
-
Adrian Bunk authored
Signed-off-by: -
Adrian Bunk authored
This patch removes two outdated changelog files. Signed-off-by:
Dave Jones <davej@redhat.com>
-
Adrian Bunk authored
Leonard N. Zubkoff passed away in August 2002. Signed-off-by:
-
