- 04 Mar, 2016 3 commits
-
-
Ville Syrjälä authored
With the hrawclk frequency cached in dev_priv, we can simply use g4x_get_aux_clock_divider() for VLV/CHV. v2: Rebase due to IS_VALLYVIEW vs. IS_CHERRYVIEW split Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-4-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
g4x is the first platform with DP support, so let's name the relevant functions as g4x_ instead i9xx_ to avoid confusion. Signed-off-by:
-
Ville Syrjälä authored
Generalize rawclk handling by storing it in dev_priv. Presumably our hrawclk readout works at least for CTG and ELK since we've been using it for DP AUX on those platforms. There are no real docs anymore after configdb vanished, so the only reference is the public CTG GMCH spec. What bits are listed in that doc match our code. The ELK GMCH spec have no relevant details unfortunately. The PNV situation is less clear. Starting from commit aa17cdb4 ("drm/i915: initialize backlight max from VBT") we assume that the CTG/ELK hrawclk readout works for PNV as well. At least the results *seem* reasonable for one PNV machine (Lenovo Ideapad S10-3t). Sadly the PNV GMCH spec doesn't have the goods on the relevant register either. So let's keep assuming it works for PNV,ELK,CTG and read it out on those platforms. G33 also has hrawclk according to some notes in BSpec, but we don't actually need it for anything, so let's not even try to read it out there. v2: Rebase due to IS_VALLYVIEW vs. IS_CHERRYVIEW split Use KHz() all over, and kill off a few useless temp variables Signed-off-by:
-
- 03 Mar, 2016 9 commits
-
-
Tvrtko Ursulin authored
Looks like this code does not need to wait atomically since it otherwise takes the mutex. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Currently the wait_for_atomic_us only allows for a jiffie timeout granularity which is not nice towards callers requesting small micro-second timeouts. Re-implement it so micro-second timeout granularity is really supported and not just in the name of the macro. This has another beneficial side effect that it improves "gem_latency -n 100" results by approximately 2.5% (throughput and latencies) and 3% (CPU usage). (Note this improvement is relative to not yet merged execlist lock uncontention patch which moves the CSB MMIO outside this lock.) It also shrinks some hot functions like fw_domains_get by a tiny 3%. v2: * Warn when used from non-atomic context (if possible). * Warn on too long atomic waits. v3: * Added comment explaining CONFIG_PREEMPT_COUNT. * Fixed pre-processor indentation. (Chris Wilson) v4: * Commit msg update (gem_latency) and rebase. v5: * Commit message re-wording. * Added comment about no need for double cond check. (Chris Wilson) Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
v2: Added a submenu based on an idea by Chris Wilson. Signed-off-by:
-
Tvrtko Ursulin authored
I do not see that this needs to be done atomically and up to one second is quite a long time to busy loop. Signed-off-by:
-
Tvrtko Ursulin authored
This is for callers who want micro-second precision but are not waiting from the atomic context. v2: * Fix atomic waits. (Dave Gordon) * Use USEC_PER_SEC and USEC_PER_MSEC. (Chris Wilson) Signed-off-by:
-
Deepak M authored
The MIPI clock calculations for the addtional clock are revised from B0 stepping onwards, the bit definitions have changed compared to old stepping. v2: Fixing compilation warning. v3: Retained the old Macros (Jani) Signed-off-by:
Deepak M <m.deepak@intel.com> Tested-by: Ramalingam C <ramalingam.c@intel.com> # BXT-T with Tianma panel Signed-off-by:
-
Maarten Lankhorst authored
Only planes that are part of the state should be used for recalculating watermarks. For planes not part of the state the previous patch allows us to re-use the old values since they're calculated even for levels that are not actively used. Changes since v1: - Remove big if from intel_crtc_atomic_check. - Remove extra newline. - Remove memset in ilk_compute_pipe_wm. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456826842-32553-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
As Paulo has noted we can help bisectability by separating computing watermarks on a noop in 2 separate commits. This patch no longer clears the crtc watermark state, but recalculates it completely. Regardless whether a level is used the full values for each level are calculated. If a level is invalid wm[level].enable is unset. Changes since v1: - Only call ilk_validate_wm_level when level <= usable_level. (Ville) Signed-off-by:
-
Maarten Lankhorst authored
This function returns an int, but when ilk_validate_pipe_wm fails it returns false, which is 0 (success). As a result invalid watermarks are applied, while they should have been rejected. Fix this by returning -EINVAL. Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com>
-
- 02 Mar, 2016 3 commits
-
-
Sagar Arun Kamble authored
This changes ensures device is active when frequency limits are changed. This is needed as we are writing to register RPNSWREQ in intel_set_rps. If not done, might lead to undesired errors like: [ 1965.189137] [drm:fw_domains_get] *ERROR* blitter: timed out waiting for forcewake ack to clear. v2: Added elaborate commit message. (Jani) Fixing RPM reference drop in early exit paths. (Ville) Signed-off-by:Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454951831-11778-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by:
-
Tvrtko Ursulin authored
commit e5756c10 Author: Imre Deak <imre.deak@intel.com> Date: Fri Aug 14 18:43:30 2015 +0300 drm/i915/bxt: don't allow cached GEM mappings on A stepping Added an exception of disallowing snooping for Broxton A stepping hardware but userptr was still enabling it regardless. Move the check to HAS_SNOOP now that it is used from multiple call sites and use it. v2: Userptr cannot be supported when it cannot be coherent and generalize the code better. (Chris Wilson) v3: Make has_snoop true only when !has_llc. (Chris Wilson) Signed-off-by:
-
Maarten Lankhorst authored
This fixes the IGT test, which interprets unknown status as failed to acquire load detect pipe. Cc: Gabriel Feceoru <gabriel.feceoru@intel.com> Signed-off-by:
-
- 01 Mar, 2016 23 commits
-
-
Imre Deak authored
Disabling the DC states when it's already disabled is a valid scenario, for example during HW state sanitization during driver loading and resuming or when DC states are disabled via the i915.enable_dc or disable_power_well option. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-4-git-send-email-imre.deak@intel.com
-
Imre Deak authored
If power well support is disabled via the i915.disable_power_well module option we should never enable DC states. Currently we would enable DC states even in this case during system suspend, where we need to disable all power wells regardless of the disable_power_well option. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
We can simplify the conditions selecting the target DC state during runtime by calculating the allowed DC states in advance during driver loading. This also makes it easier to disable DC states depending on the i915.disable_power_well module option, added in the next patch. v2: - Print a debug message if the requested max DC value was adjusted due to a platform limit. Also debug print the calculated mask value. (Patrik) CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
During system suspend we need to first disable power wells then unitialize the display core. In case power well support is disabled we did this in the wrong order, so fix this up. Fixes: d314cd43 ("drm/i915: fix handling of the disable_power_well module option") CC: stable@vger.kernel.org CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
arun.siluvery@linux.intel.com authored
execute during context save/restore, good to have them in error state. v2: use wa_ctx->size and print only size values (Mika) v3: simplify conditions when recording and freeing object (Chris) v4: resolve checkpatch errors (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
LPT/WPT-H are limited to max 180 MHz CRT dotclock. Most other platforms have a limit of 350 MHz. Supposedly gen3 and gen4 go up to 400 MHz. VLV is a bit special since the docs are poor. Supposedly the DAC would be good up to 355 MHz, but currently we limit the DPLL to 270 MHz, so we'll have to limit the port clock to the same unless we change the DPLL limits. Signed-off-by:
-
Ville Syrjälä authored
Rather than assume the VGA dotclock is really the FDI based thing, let's read out the real thing via iclkip, and after readout it'll get to compare it with the FDI based number to make sure they're in sync. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The reason for spcial casing 20MHz in the iclkip calculations is that it would overflow the 7 bit divisor value. Let's rewrite the special case to check for just that, and bump up auxdiv when needed. This makes the code work for freqeuencies close to but not exactly 20MHz. The real lower limit for auxdiv=0 is actually: 172800000/(0x7f+2)*64)=~20930 kHz, and below that we must resort to auxdiv=1. Actually this is all very theoretical since we limit the dotclock to min 25MHz with CRT on all platforms. 25Mhz is actually the documented limit in Bspec, so it seems we ought to never need to worry about the auxdiv=1 case. But no harm in having it. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Instead of assuming we've correctly set up SPLL to run at 270Mhz for FDI, let's use the port_clock from pipe_config which should be what we want. This would catch problems if someone misconfigures SPLL for whatever reason. Signed-off-by:
-
Ville Syrjälä authored
Currently we check if the encoder's idea of dotclock agrees with what we calculated based on the FDI parameters. We do this in the encoder .get_config() hooks, which isn't so nice in case the BIOS (or some other outside party) made a mess of the state and we're just trying to take over. So as a prep step to being able sanitize such a bogus state, move the the sanity check to just after we've read out the entire state. If we then need to sanitize a bad state, it should be easier to move the sanity check to occur after sanitation instead of before it. Signed-off-by:
-
Ville Syrjälä authored
On HSW/BDW ddi_pll_sel is the actual register value. Let's dump it in hex so that people migth actually understand what it says. Signed-off-by:
-
Ville Syrjälä authored
Instead of repopulatin the rotation_info struct for the fb every time we try to use the fb, we can just populate it once when creating the fb, and later we can just copy the pre-populate struct into the gtt_view. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-10-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
rotate_pages() checks to see if it got called with a NULL sg, and then goes to extract it from sg->sgl. It always gets called with a NULL sg for the first plane, so moving the initial 'sg=st->sgl' assignment out into intel_rotate_fb_obj_pages() seems less special-casey. Signed-off-by:
-
Ville Syrjälä authored
Throw out a bunch of unnecessary stuff from struct intel_rotation_info, and pull most of the remaining stuff to live under an array of per-color plane sub-structures. What still remains outside the sub-structure will be reorgranized later as well, but that requires more work elsewhere so leave it be for now. v2: Split the vma size == luma+chroma size fix to prep patch (Daniel) Signed-off-by:
-
Ville Syrjälä authored
intel_compute_page_offsets() gets passed a bunch of the framebuffer metadate sepearately. Just pass the framebuffer itself to make life simpler for the caller, and make it less likely they would make a mistake in the order of the arguments (as most as just unsigned ints and such). We still pass the pitch explicitly since for 90/270 degree rotation the caller has to pass in the right thing. Signed-off-by:
-
Ville Syrjälä authored
intel_pin_and_fence_fb_obj() only needs the framebuffer, and the desird rotation (to find the right GTT view for it), so no need to pass all kinds of plane stuff. The main motivation is to get rid of the uggy NULL plane_state handling due to fbdev. v2: Add a note why I really want this Signed-off-by:
-
Ville Syrjälä authored
SKL+ needs >4K alignment for tiled surfaces, so make intel_compute_page_offset() handle it. The way we do it is first we compute the closest tile boundary as before, and then figure out how many tiles we need to go to reach the desired alignment. The difference in the offset is then added into the x/y offsets. v2: Be less confusing wrt. units (pixels vs. bytes) (Daniel) v3: Use u32 for offsets Have intel_adjust_tile_offset() return the new offset (will be useful later) Add an offset_aligned variable (Daniel) Signed-off-by: -
Ville Syrjälä authored
The page aligned surface address calculation needs to know which way things are rotated. The contract now says that the caller must pass the rotate x/y coordinates, as well as the tile_height aligned stride in the tile_height direction. This will make it fairly simple to deal with 90/270 degree rotation on SKL+ where we have to deal with the rotated view into the GTT. v2: Pass rotation instead of bool even thoughwe only care about 0/180 vs. 90/270 v3: Introduce intel_tile_dims(), and don't mix up different units so much v4: Unconfuse bytes vs. pixels even more Signed-off-by:
-
Ville Syrjälä authored
Make if clear whether we're talking tile widths in bytes or in pixels. Signed-off-by:
-
Ville Syrjälä authored
The size of the rotated ggtt mapping ought to include the size of the chroma plane as well. Not a huge deal since we don't expose NV12 (or any pother planar format for that matter) yet. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 89e3e142 ("drm/i915: Support NV12 in rotated GGTT mapping") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Imre Deak authored
Not all platforms set this callback, so NULL check it before calling it. v2: - Call intel_update_watermarks() on HSW+ where the callback is not set. (Matt) CC: Matt Roper <matthew.d.roper@intel.com> Fixes: commit ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by:
-
Tvrtko Ursulin authored
Assorted changes in the areas of code cleanup, reduction of invariant conditional in the interrupt handler and lock contention and MMIO access optimisation. * Remove needless initialization. * Improve cache locality by reorganizing code and/or using branch hints to keep unexpected or error conditions out of line. * Favor busy submit path vs. empty queue. * Less branching in hot-paths. v2: * Avoid mmio reads when possible. (Chris Wilson) * Use natural integer size for csb indices. * Remove useless return value from execlists_update_context. * Extract 32-bit ppgtt PDPs update so it is out of line and shared with two callers. * Grab forcewake across all mmio operations to ease the load on uncore lock and use chepear mmio ops. v3: * Removed some more pointless u8 data types. * Removed unused return from execlists_context_queue. * Commit message updates. v4: * Unclumsify the unqueue if statement. (Chris Wilson) * Hide forcewake from the queuing function. (Chris Wilson) Version 3 now makes the irq handling code path ~20% smaller on 48-bit PPGTT hardware, and a little bit less elsewhere. Hot paths are mostly in-line now and hammering on the uncore spinlock is greatly reduced together with mmio traffic to an extent. Benchmarking with "gem_latency -n 100" (keep submitting batches with 100 nop instruction) shows approximately 4% higher throughput, 2% less CPU time and 22% smaller latencies. This was on a big-core while small-cores could benefit even more. Most likely reason for the improvements are the MMIO optimization and uncore lock traffic reduction. One odd result is with "gem_latency -n 0" (dispatching empty batches) which shows 5% more throughput, 8% less CPU time, 25% better producer and consumer latencies, but 15% higher dispatch latency which is yet unexplained. Signed-off-by:
-
Maarten Lankhorst authored
CI runs with DEBUG_WW_MUTEX_SLOWPATH, so -EDEADLK occurs a lot more. Handle the case where drm_atomic_commit fails with -EDEADLK correctly. Signed-off-by:
-
- 29 Feb, 2016 2 commits
-
-
Eric Engestrom authored
79e53945 ("DRM: i915: add mode setting support") added those variables but never used them. Signed-off-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
Eric Engestrom authored
ae80152d ("drm/i915: Rewrite VLV/CHV watermark code") removed everything that would have used those vars. Signed-off-by:
-
