- 25 May, 2011 40 commits
-
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: RCU conversion
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits) sh_mobile_meram: Safely disable MERAM operation when not initialized video: mb862xxfb: add support for L1 displaying video: mb862xx: add support for controller's I2C bus adapter video: mb862xxfb: relocate register space to get contiguous vram video: mb862xxfb: use pre-initialized configuration for PCI GDCs video: mb862xxfb: correct fix.smem_len field initialization video: s3c-fb: correct transparency checking in 32bpp video: s3c-fb: add gpio setup function to resume function fbdev/amifb: Remove superfluous alignment of frame buffer memory fbdev/amifb: Do not call panic() if there's not enough Chip RAM fbdev/amifb: Correct check for video memory size video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME video: s3c-fb: add window variant information for S5P video: s3c-fb: add additional validate bpps video: s3c-fb: correct window osd size offset values udlfb: include prefetch.h explicitly drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region drivers/video/sm501fb.c: Convert release_resource to release_mem_region drivers/video: Convert release_resource to release_mem_region video, udlfb: Fix two build warnings about 'ignoring return value' ...
-
Andrew Morton authored
alpha allmodconfig: drivers/tty/serial/pch_uart.c: In function 'dma_handle_tx': drivers/tty/serial/pch_uart.c:873: error: implicit declaration of function 'kzalloc' drivers/tty/serial/pch_uart.c:873: warning: assignment makes pointer from integer without a cast drivers/tty/serial/pch_uart.c: In function 'pch_uart_init_port': drivers/tty/serial/pch_uart.c:1403: warning: assignment makes pointer from integer without a cast Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
alpha allmodconfig: drivers/gpio/ml_ioh_gpio.c: In function 'ioh_gpio_probe': drivers/gpio/ml_ioh_gpio.c:205: error: implicit declaration of function 'kzalloc' drivers/gpio/ml_ioh_gpio.c:205: warning: assignment makes pointer from integer without a cast also fix this: drivers/gpio/ml_ioh_gpio.c:145: warning: 'ioh_gpio_save_reg_conf' defined but not used drivers/gpio/ml_ioh_gpio.c:154: warning: 'ioh_gpio_restore_reg_conf' defined but not used Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Andrew Morton authored
alpha allmodconfig: drivers/gpio/vx855_gpio.c: In function 'vx855gpio_probe': drivers/gpio/vx855_gpio.c:233: error: implicit declaration of function 'kzalloc' drivers/gpio/vx855_gpio.c:233: warning: assignment makes pointer from integer without a cast Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Andrew Morton authored
We get this spurious warning: fs/ncpfs/inode.c: In function 'ncp_fill_super': fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[1u]' may be used uninitialized in this function fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[2u]' may be used uninitialized in this function fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[3u]' may be used uninitialized in this function ... It's notabug, but we can easily fix it with a memset(). Reported-by:
Harry Wei <jiaweiwei.xiyou@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
-
Joe Perches authored
Currently, printk lines with a only KERN_PREFIX and a quoted string without a comma or close paren that exceed 80 columns are flagged with a warning. ie: printk(KERN_WARNING "some long string that extends beond 80 cols..." "and is continued on another line\n"); Allow this form instead of emitting a warning. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Many module or file local logging functions use specific prefixes other than pr|dev|netdev. Allow all forms like foo_printk and foo_err to be longer than 80 columns. Also allow MODULE_<BAR> declarations to be longer than 80 columns. Signed-off-by:
-
Joe Perches authored
Add a warning for unterminated quoted strings with line continuations as these frequently add unwanted whitespace. Signed-off-by:
-
Stephen Boyd authored
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it to lib/Kconfig.debug so each arch doesn't have to define it. This obviously makes the option generic, but that's fine because the config is already used in generic code. It's not obvious to me that sysrq-P actually does anything caution by keeping the most inclusive wording. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Richard Weinberger <richard@nod.at> Acked-by:
Mike Frysinger <vapier@gentoo.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Shaohua Li authored
The percpu_counter_*_positive() API in UP case doesn't check if return value is positive. Add comments to explain why we don't. Also if count < 0, returns 0 instead of 1 for *read_positive(). [akpm@linux-foundation.org: tweak comment] Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
So we can specify the virtual address as the base of the pool chunk and then get physical addresses for hardware IP. For example on at91 we will use this on spi, uart or macb Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com> Cc: Jes Sorensen <jes@wildopensource.com> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Stephen Boyd authored
DEBUG_PER_CPU_MAPS is used in lib/cpumask.c as well as in inlcude/linux/cpumask.h and thus it has outgrown its use within x86 and powerpc alone. Any arch with SMP support may want to get some more debugging, so make this option generic. Signed-off-by:
-
Alexey Dobriyan authored
There is quite a lot of code which does copy_from_user() + strict_strto*() or simple_strto*() combo in slightly different ways. Before doing conversions all over tree, let's get final API correct. Enter kstrtoull_from_user() and friends. Typical code which uses them looks very simple: TYPE val; int rv; rv = kstrtoTYPE_from_user(buf, count, 0, &val); if (rv < 0) return rv; [use val] return count; There is a tiny semantic difference from the plain kstrto*() API -- the latter allows any amount of leading zeroes, while the former copies data into buffer on stack and thus allows leading zeroes as long as it fits into buffer. This shouldn't be a problem for typical usecase "echo 42 > /proc/x". The point is to make reading one integer from userspace _very_ simple and very bug free. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Ilia Mirkin authored
This has no actual effect, since sizeof(struct hlist_head) == sizeof(struct hlist_head *), but it's still the wrong type to use. The semantic match that finds this problem: // <smpl> @@ type T; identifier x; @@ T *x; ... * x = kzalloc(... * sizeof(T*) * ..., ...); // </smpl> [akpm@linux-foundation.org: use kcalloc()] Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by:
Lars Ellenberg <lars@linbit.com> Signed-off-by:
-
Uwe Kleine-König authored
This function makes a deep copy of the platform data to allow it to live in init memory. For a kernel that supports several machines and so includes the definition for several leds-gpio devices this saves quite some memory because all but one definition can be free'd after boot. As the function is used by arch code it must be builtin and so cannot go into leds-gpio.c. [akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/] Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by:
-
Shreshtha Kumar Sahu authored
Add add regulator support to lm3530 driver. The lm3530 driver needs to get proper regulator during device probe and enable it before accessing the device. Also it disables the regulator in case of brightness == LED_OFF, and puts it back during driver removal. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Vasily Khoruzhick authored
The H1940 machine now uses leds-gpio and leds-h1940 has no users anymore. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Cc: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Jan Weitzel authored
The pca953x family are only different in number of leds and register layout Adding chipinfo to use driver with whole pca953x family Rename driver to pca953x, but left files and platformflags named pca9532. Tested with pca9530 and pca9533 Tested-by:
Juergen Kilb <j.kilb@phytec.de> Signed-off-by:
Jan Weitzel <j.weitzel@phytec.de> Acked-by:
Joachim Eastwood <joachim.eastwood@jotron.com> Tested-by:
-
Joachim Eastwood authored
Allow unused leds on pca9532 to be used as gpio. The board I am working on now has no less than 6 pca9532 chips. One chips is used for only leds, one has 14 leds and 2 gpio and the rest of the chips are gpio only. There is also one board in mainline which could use this capabilty; arch/arm/mach-iop32x/n2100.c 232 { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ 233 { .type = PCA9532_TYPE_NONE }, /* reset gpio */ This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a gpiochip if any pin has this type set. The gpio will registers all chip pins but will filter on gpio_request. [randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled] Signed-off-by:Wolfram Sang <w.sang@pengutronix.de> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Weitzel <j.weitzel@phytec.de> Cc: Juergen Kilb <j.kilb@phytec.de> Signed-off-by:
-
Esben Haabendal authored
By setting initial values blink_delay_on and blink_delay_off in a led_classdev struct, this change starts the blinking when the led is initialized. With this patch, you can initialize blink_delay_on and blink_delay_off in led_classdev with default_trigger set to "timer", and the led will start up blinking. The current ledtrig-timer implementation ignores any initial blink_delay_on/blink_delay_off settings, and requires setting blink_delay_on/blink_delay_off (typically from userspace) before the led blinks. Signed-off-by:
Esben Haabendal <eha@doredevelopment.dk> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Joe Perches authored
Tobias's email bounces and he hasn't submitted or acked a patch in git history. Signed-off-by:
-
Lucian Adrian Grijincu authored
This tree hasn't been updated since June 2008. Signed-off-by:
Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Acked-by:
Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Mike Travis authored
On larger systems, because of the numerous ACPI, Bootmem and EFI messages, the static log buffer overflows before the larger one specified by the log_buf_len param is allocated. Minimize the overflow by allocating the new log buffer as soon as possible. On kernels without memblock, a later call to setup_log_buf from kernel/init.c is the fallback. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_PRINTK=n build] Signed-off-by:
Mike Travis <travis@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Yinghai Lu authored
On larger systems, information in the kernel log is lost because there is so much early text printed, that it overflows the static log buffer before the log_buf_len kernel parameter can be processed, and a bigger log buffer allocated. Distros are relunctant to increase memory usage by increasing the size of the static log buffer, so minimize the problem by allocating the new log buffer as early as possible. This patch: Add an error return if CONFIG_HAVE_MEMBLOCK is not set instead of having to add #ifdef CONFIG_HAVE_MEMBLOCK around blocks of code calling that function. Signed-off-by:
-
Jan Beulich authored
Otherwise, the warning at the top of vsnprintf() gets triggered by kvasprintf()'s first invocation (with NULL buffer and zero size) of vsnprintf(). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
KOSAKI Motohiro authored
sparse can't parse warning and error attribute. then they should be hidden from sparse. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
-
KOSAKI Motohiro authored
commit c5e631cf ("ARRAY_SIZE: check for type") added __must_be_array(). But sparse can't parse this gcc extention. Now make C=2 makes following sparse errors a lot. kernel/futex.c:2699:25: error: No right hand side of '+'-expression Because __must_be_array() is used for ARRAY_SIZE() macro and it is used very widely. This patch fixes it. Signed-off-by:
-
KOSAKI Motohiro authored
BUILD_BUG_ON() causes a syntax error to detect coding errors. So it causes sparse to detect an error too. This reduces sparse's usefulness. This patch makes a dummy BUILD_BUG_ON() definition for sparse. Signed-off-by:
-
Andrew Worsley authored
A fix to the TSC (Time Stamp Counter) based bogoMIPS calculation used on secondary CPUs which has two faults: 1: Not handling wrapping of the lower 32 bits of the TSC counter on 32bit kernel - perhaps TSC is not reset by a warm reset? 2: TSC and Jiffies are no incrementing together properly. Either jiffies increment too quickly or Time Stamp Counter isn't incremented in during an SMI but the real time clock is and jiffies are incremented. Case 1 can result in a factor of 16 too large a value which makes udelay() values too small and can cause mysterious driver errors. Case 2 appears to give smaller 10-15% errors after averaging but enough to cause occasional failures on my own board I have tested this code on my own branch and attach patch suitable for current kernel code. See below for examples of the failures and how the fix handles these situations now. I reported this issue earlier here: Intermittent problem with BogoMIPs calculation on Intel AP CPUs - http://marc.info/?l=linux-kernel&m=129947246316875&w=4 I suspect this issue has been seen by others but as it is intermittent and bogoMIPS for secondary CPUs are no longer printed out it might have been difficult to identify this as the cause. Perhaps these unresolved issues, although quite old, might be relevant as possibly this fault has been around for a while. In particular Case 1 may only be relevant to 32bit kernels on newer HW (most people run 64bit kernels?). Case 2 is less dramatic since the earlier fix in this area and also intermittent. Re: bogomips discrepancy on Intel Core2 Quad CPU - http://marc.info/?l=linux-kernel&m=118929277524298&w=4 slow system and bogus bogomips - http://marc.info/?l=linux-kernel&m=116791286716107&w=4 Re: Re: [RFC-PATCH] clocksource: update lpj if clocksource has - http://marc.info/?l=linux-kernel&m=128952775819467&w=4 This issue is masked a little by commit feae3203 ("timers, init: Limit the number of per cpu calibration bootup messages") which only prints out the first bogoMIPS value making it much harder to notice other values differing. Perhaps it should be changed to only suppress them when they are similar values? Here are some outputs showing faults occurring and the new code handling them properly. See my earlier message for examples of the original failure. Case 1: A Time Stamp Counter wrap: ... Calibrating delay loop (skipped), value calculated using timer frequency.. 6332.70 BogoMIPS (lpj=31663540) .... calibrate_delay_direct() timer_rate_max=31666493 timer_rate_min=31666151 pre_start=4170369255 pre_end=4202035539 calibrate_delay_direct() timer_rate_max=2425955274 timer_rate_min=2425954941 pre_start=4265368533 pre_end=2396356387 calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4265368581 >=post_end=2396356511 calibrate_delay_direct() timer_rate_max=31666274 timer_rate_min=31665942 pre_start=2440373374 pre_end=2472039515 calibrate_delay_direct() timer_rate_max=31666492 timer_rate_min=31666160 pre_start=2535372139 pre_end=2567038422 calibrate_delay_direct() timer_rate_max=31666455 timer_rate_min=31666207 pre_start=2630371084 pre_end=2662037415 Calibrating delay using timer specific routine.. 6333.28 BogoMIPS (lpj=31666428) Total of 2 processors activated (12665.99 BogoMIPS). .... Case 2: Some thing (presumably the SMM interrupt?) causing the very low increase in TSC counter for the DELAY_CALIBRATION_TICKS increase in jiffies ... Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.25 BogoMIPS (lpj=31666270) ... calibrate_delay_direct() timer_rate_max=31666483 timer_rate_min=31666074 pre_start=4199536526 pre_end=4231202809 calibrate_delay_direct() timer_rate_max=864348 timer_rate_min=864016 pre_start=2405343672 pre_end=2406207897 calibrate_delay_direct() timer_rate_max=31666483 timer_rate_min=31666179 pre_start=2469540464 pre_end=2501206823 calibrate_delay_direct() timer_rate_max=31666511 timer_rate_min=31666122 pre_start=2564539400 pre_end=2596205712 calibrate_delay_direct() timer_rate_max=31666084 timer_rate_min=31665685 pre_start=2659538782 pre_end=2691204657 calibrate_delay_direct() dropping min bogoMips estimate 1 = 864348 Calibrating delay using timer specific routine.. 6333.27 BogoMIPS (lpj=31666390) Total of 2 processors activated (12666.53 BogoMIPS). ... After 70 boots I saw 2 variations <1% slip through [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix straggly printk mess] Signed-off-by:Andrew Worsley <amworsley@gmail.com> Reviewed-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by:
-
Eric Paris authored
af4f1360 ("security: move LSM xattrnames to xattr.h") moved the XATTR_CAPS_SUFFIX define from capability.h to xattr.h. This makes sense except it was previously exports to userspace but xattr.h does not export it to userspace. This patch exports these headers to userspace to fix the ABI regression. There is some slight possibility that this will cause problems in other applications which used these #defines differently (wrongly) and I could JUST export the capabilities xattr name that we broke. Does anyonehave an idea how exposing these headers could cause a problem? Below is what is being exposed to userspace, included here since it isn't clear exactly what is going to be made available from the patch. /* Namespaces */ #define XATTR_OS2_PREFIX "os2." #define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) #define XATTR_SECURITY_PREFIX "security." #define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) #define XATTR_SYSTEM_PREFIX "system." #define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) #define XATTR_TRUSTED_PREFIX "trusted." #define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) #define XATTR_USER_PREFIX "user." #define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) /* Security namespace */ #define XATTR_SELINUX_SUFFIX "selinux" #define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX #define XATTR_SMACK_SUFFIX "SMACK64" #define XATTR_SMACK_IPIN "SMACK64IPIN" #define XATTR_SMACK_IPOUT "SMACK64IPOUT" #define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX #define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN #define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT #define XATTR_CAPS_SUFFIX "capability" #define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX Reported-by:
Ozan Çaglayan <ozan@pardus.org.tr> Signed-off-by:
Eric Paris <eparis@redhat.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Mike Travis authored
Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the cpu count is large. Setting smp affinity to cpus 256 to 263 would be: echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity instead of: echo 256-263 > smp_affinity_list Think about what it looks like for cpus around say, 4088 to 4095. We already have many alternate "list" interfaces: /sys/devices/system/cpu/cpuX/indexY/shared_cpu_list /sys/devices/system/cpu/cpuX/topology/thread_siblings_list /sys/devices/system/cpu/cpuX/topology/core_siblings_list /sys/devices/system/node/nodeX/cpulist /sys/devices/pci***/***/local_cpulist Add a companion interface, smp_affinity_list to use cpu lists instead of cpu maps. This conforms to other companion interfaces where both a map and a list interface exists. This required adding a bitmap_parselist_user() function in a manner similar to the bitmap_parse_user() function. [akpm@linux-foundation.org: make __bitmap_parselist() static] Signed-off-by:
-
Amerigo Wang authored
There is no CONFIG_WORKQUEUE_DEBUGFS any more, so this code is dead. Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Roland Dreier authored
The presense of a writeq() implementation on 32-bit x86 that splits the 64-bit write into two 32-bit writes turns out to break the mpt2sas driver (and in general is risky for drivers as was discussed in <http://lkml.kernel.org/r/adaab6c1h7c.fsf@cisco.com>). To fix this, revert 2c5643b1 ("x86: provide readq()/writeq() on 32-bit too") and follow-on cleanups. This unfortunately leads to pushing non-atomic definitions of readq() and write() to various x86-only drivers that in the meantime started using the definitions in the x86 version of <asm/io.h>. However as discussed exhaustively, this is actually the right thing to do, because the right way to split a 64-bit transaction is hardware dependent and therefore belongs in the hardware driver (eg mpt2sas needs a spinlock to make sure no other accesses occur in between the two halves of the access). Build tested on 32- and 64-bit x86 allmodconfig. Link: http://lkml.kernel.org/r/x86-32-writeq-is-broken@mdm.bga.comAcked-by:
Hitoshi Mitake <h.mitake@gmail.com> Cc: Kashyap Desai <Kashyap.Desai@lsi.com> Cc: Len Brown <lenb@kernel.org> Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Acked-by:
James Bottomley <James.Bottomley@parallels.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Stephen Boyd authored
This constant hasn't been used since before the git era (2.6.12) and thus can be dropped. Signed-off-by:
-
Wanlong Gao authored
The macro to_class_dev() uses the deprecated structure class_device, and the c2port_device has no member named class in the definition of the macro to_c2port_device. Signed-off-by:
Wanlong Gao <wanlong.gao@gmail.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
Tim Gardner authored
Apps are increasingly using more than 1024 file descriptors. See discussion in several distro bug trackers, e.g. BugLink: http://bugs.launchpad.net/bugs/663090 https://issues.rpath.com/browse/RPL-2054 You don't want to raise the default soft limit, since that might break apps that use select(), but it's safe to raise the default hard limit; that way, apps that know they need lots of file descriptors can raise their soft limit without needing root, and without user intervention. Ubuntu is doing this with a kernel change because they have a policy of not changing kernel defaults in userland. While 4096 might not be enough for *all* apps, it seems to be plenty for the apps I've seen lately that are unhappy with 1024. Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Cc: Dan Kegel <dank@kegel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Richard Weinberger authored
os_dump_core() emits SIGTERM to terminate all UML processes. Kernel threads have to exit on SIGTERM instead of calling last_ditch_exit(). Multiple calls to last_ditch_exit() can cause a crash. Signed-off-by:
-
Richard Weinberger authored
Fix build failures on UML. Signed-off-by:
-
