- 27 Jul, 2011 40 commits
-
-
Josh Wu authored
This patch is to enable Atmel Image Sensor Interface (ISI) driver support. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
This patch removes .enum_input(), .suspend() and .resume() soc-camera client operations. Functionality, provided by .enum_input(), if needed, can be implemented using the v4l2-subdev API. As for .suspend() and .resume(), the only client driver, implementing these methods has been mt9m111, and the only host driver, using them has been pxa-camera. Now that both those drivers have been converted to the standard subdev .s_power() operation, .suspend() and .resume() can be removed. Signed-off-by:
-
Guennadi Liakhovetski authored
Eliminate soc-camera specific .suspend() and .restore() methods in favour of the standard v4l2-subdev .s_power() method Signed-off-by:
-
Guennadi Liakhovetski authored
It is more convenient to propagate the higher level abstraction - the struct mt9m111 object into functions and then retrieve a pointer to the i2c client, if needed, than to do the reverse. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Guennadi Liakhovetski authored
SOCAM_MIPI_[1234]LANE flags are not board-specific sensor flags, they are bus configuration flags. Signed-off-by:
-
Guennadi Liakhovetski authored
tw9910 is a TV decoder, it doesn't have a tuner. Besides, the .enum_input soc-camera operation is optional and normally not needed. Signed-off-by:
-
Guennadi Liakhovetski authored
soc_camera core now performs the standard .bytesperline and .sizeimage calculations internally, no need to duplicate in drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
If the user is requesting too large a frame, instead of failing select an acceptable geometry, preserving the requested aspect ratio. Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera specific .suspend() and .resume() methods are deprecated and should be replaced by the subdev standard .s_power() operation. Signed-off-by:
-
Guennadi Liakhovetski authored
The pxa-camera driver only supports progressive video so far. Passing down to the client the same format, as what the user has requested can result in interlaced video, even if the client supports both. This patch avoids such cases. Signed-off-by:
-
Guennadi Liakhovetski authored
soc_camera core now performs the standard .bytesperline and .sizeimage calculations internally, no need to duplicate in drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
soc_camera core now performs the standard .bytesperline and .sizeimage calculations internally, no need to duplicate in drivers. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Whenever a control changes value or state an event is sent to anyone that subscribed to it. This functionality is useful for control panels but also for applications that need to wait for (usually status) controls to change value. Signed-off-by:
-
Hans Verkuil authored
When an application changes a control you want to generate an event. However, you want to avoid sending such an event back to the application (file handle) that caused the change. Add the filehandle to the various set control functions. The filehandle isn't used yet, but the control event patches will need this. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
It is a bit tricky to handle autogain/gain type scenerios correctly. Such controls need to be clustered and the V4L2_CTRL_FLAG_UPDATE should be set on the autofoo controls. In addition, the manual controls should be marked inactive when the automatic mode is on, and active when the manual mode is on. This also requires specialized volatile handling. The chances of drivers doing all these things correctly are pretty remote. So a new v4l2_ctrl_auto_cluster function was added that takes care of these issues. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
If you have a cluster of controls that is a mix of volatile and non-volatile controls, then requesting the value of the volatile control would fail if the master control of that cluster was non-volatile. The code assumed that the volatile state of the master control was the same for all other controls in the cluster. This is now fixed. In addition, it was clear from bugs in some drivers that it was confusing that the ctrl->cur union had to be used in g_volatile_ctrl. Several drivers used the 'new' values instead. The framework was changed so that drivers now set the new value instead of the current value. This has an additional benefit as well: the volatile values are now only stored in the 'new' value, leaving the current value alone. This is useful for autofoo/foo control clusters where you want to have a 'foo' control act like a volatile control if 'autofoo' is on, but as a normal control when it is off. Since with this change the cur value is no longer overwritten when g_volatile_ctrl is called, you can use it to remember the original 'foo' value. For example: autofoo = 0, foo = 10 and foo is non-volatile. Now autofoo is set to 1 and foo is marked volatile. Retrieving the foo value will get the volatile value. Set autofoo back to 0, which marks foo as non- volatile again, and retrieving foo will get the old current value of 10. Signed-off-by:
-
Hans Verkuil authored
To be consistent with v4l2-ioctl.c. Signed-off-by:
-
Hans Verkuil authored
This is required to implement control events and is also needed to allow for per-filehandle control handlers. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
When applications try to set READ_ONLY controls an error should be returned. However, when drivers do that it should be accepted. Those controls could reflect some driver status which the application can't change but the driver obviously has to be able to change it. This is needed among others for future HDMI status controls. Signed-off-by:
-
Hans Verkuil authored
The lower-level prepare functions just set error_idx for each control that might have an error. The high-level functions will override this with cs->count in the get and set cases. Only try will keep the error_idx. Signed-off-by:
-
Hans Verkuil authored
Add the call_op define to safely call the control ops. This also allows for controls without any ops such as the 'control class' controls. Signed-off-by:
-
Mauro Carvalho Chehab authored
Acked-by:
-
Mauro Carvalho Chehab authored
Just like the video drivers, the right thing to do is to use the per-subsystem version control. Acked-by:
-
Mauro Carvalho Chehab authored
Standardize the remaining video drivers to return the API version for the VIDIOC_QUERYCAP version, instead of a per-driver version. Those drivers had the version updated more recently or are SoC drivers. Even so, it doesn't sound a good idea to keep a per-driver version control, so, let's use the per-subsystem version control instead. Acked-by:
-
Mauro Carvalho Chehab authored
Instead of handling a per-driver driver version, use the per-subsystem one. As reviewed by Jean-Francois Moine <moinejf@free.fr>: - the 'info' may be simplified: Reviewed-by:
Jean-Francois Moine <moinejf@free.fr> Acked-by:
-
Mauro Carvalho Chehab authored
uvcvideo doesn't use vidioc_ioctl2. As the API is changing to use a common version for all drivers, we need to expliticly fix this driver. Acked-by:
-
Mauro Carvalho Chehab authored
sn9c102 doesn't use vidioc_ioctl2. As the API is changing to use a common version for all drivers, we need to expliticly fix this driver. Acked-by:
-
Mauro Carvalho Chehab authored
pvrusb2 doesn't use vidioc_ioctl2. As the API is changing to use a common version for all drivers, we need to expliticly fix this driver. Acked-by:
-
Mauro Carvalho Chehab authored
et61x251 doesn't use vidioc_ioctl2. As the API is changing to use a common version for all drivers, we need to expliticly fix this driver. Acked-by:
-
Mauro Carvalho Chehab authored
After discussing with Andy Walls on irc, we've agreed that this is the best thing to do. No regressions will be introduced, as 3.x.y is greater then the current versions for cx18 and ivtv. Acked-by:
-
Mauro Carvalho Chehab authored
After discussing with Hans, change pwc to use the default version control. The only version ever used for pwc driver is 10.0.12, due to commit 2b455db6. Changing it to 3.x.y won't conflict with the old version. There's no namespace conflicts in any predictable future. Even on the remote far-away case where we might have a conflict, it will be on just one specific stable Kernel release (Kernel 10.0.12), if we ever have such stable release. So, it is safe and consistent on using 3.x.y numering schema for it. Acked-by:
-
