- 05 Oct, 2019 10 commits
-
-
Shih-Yuan Lee (FourDollars) authored
commit 7b485d17 upstream. The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A codec like another HP machine. Signed-off-by:
Shih-Yuan Lee (FourDollars) <fourdollars@debian.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920134052.GA8035@localhostSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 2757970f upstream. The node obtained from of_find_node_by_path() has to be unreferenced after the use, but we forgot it for the root node. Fixes: f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support") Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Marco Felsch authored
commit 2d29bcc8 upstream. The function only consists of a single switch case block without a default case. Unsupported control requests are indicated by the -EINVAL return code trough the last return statement at the end of the function. So exiting just the switch case block returns the -EINVAL error code but the hue control is supported and a zero should be returned instead. Replace the break by a 'return 0' to fix this behaviour. Fixes: d183e4ef ("[media] v4l: tvp5150: Add missing break in set control handler") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 5fc194ea upstream. Add missing break statement in order to prevent the code from falling through to case CRYPTO_ALG_TYPE_AHASH. Fixes: aeb4c132 ("crypto: talitos - Convert to new AEAD interface") Cc: stable@vger.kernel.org Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tokunori Ikegami authored
commit 37c673ad upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bf ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by:
Fabio Bettoni <fbettoni@gmail.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Alan Stern authored
commit 416dacb8 upstream. The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
commit 5f924277 upstream. The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by:
-
Alan Stern authored
commit 98375b86 upstream. The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by:
-
Jack Morgenstein authored
commit f794809a upstream. The upstream kernel commit cited below modified the workqueue in the new CQ API to be bound to a specific CPU (instead of being unbound). This caused ALL users of the new CQ API to use the same bound WQ. Specifically, MAD handling was severely delayed when the CPU bound to the WQ was busy handling (higher priority) interrupts. This caused a delay in the MAD "heartbeat" response handling, which resulted in ports being incorrectly classified as "down". To fix this, add a new "unbound" WQ type to the new CQ API, so that users have the option to choose either a bound WQ or an unbound WQ. For MADs, choose the new "unbound" WQ. Fixes: b7363e67 ("IB/device: Convert ib-comp-wq to be CPU-bound") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.m> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Marcel Holtmann authored
[ Upstream commit 68d19d7d ] This reverts commit c49a8682. There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- 21 Sep, 2019 30 commits
-
-
Greg Kroah-Hartman authored
-
Cong Wang authored
[ Upstream commit 6efb971b ] When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL pointer which leads to a crash in sfb_destroy(). Similar for sch_dsmark. Instead of fixing each separately, Linus suggested to just accept NULL pointer in qdisc_put(), which would make callers easier. (For sch_dsmark, the bug probably exists long before commit 6529eaba.) Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Reported-by: syzbot+d5870a903591faaca4ae@syzkaller.appspotmail.com Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vineet Gupta authored
This is a custom patch (no mainline equivalent) for stable backport only to address 0-Day kernel test infra ARC 4.x.y builds errors. The reason for this custom patch as that it is a single patch, touches only ARC, vs. atleast two 7c2c11b2, dc8635b7 which touch atleast 3 other arches (one long removed) and could potentially have a fallout. Reported-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sean Young authored
commit 0c4df39e upstream. Ensure we do not access the buffer beyond the end if no 0xff byte is encountered. Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jann Horn authored
commit 52f6f9d7 upstream. As sparse points out, these two copy_from_user() should actually be copy_to_user(). Fixes: 229b53c9 ("take floppy compat ioctls to sodding floppy.c") Cc: stable@vger.kernel.org Acked-by:
Alexander Popov <alex.popov@linux.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Joerg Roedel authored
[ Upstream commit 754265bc ] After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by:
Qian Cai <cai@lca.pw> Fixes: 256e4621 ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Hillf Danton authored
[ Upstream commit d41a3eff ] If a request_key authentication token key gets revoked, there's a window in which request_key_auth_describe() can see it with a NULL payload - but it makes no check for this and something like the following oops may occur: BUG: Kernel NULL pointer dereference at 0x00000038 Faulting instruction address: 0xc0000000004ddf30 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [...] request_key_auth_describe+0x90/0xd0 LR [...] request_key_auth_describe+0x54/0xd0 Call Trace: [...] request_key_auth_describe+0x54/0xd0 (unreliable) [...] proc_keys_show+0x308/0x4c0 [...] seq_read+0x3d0/0x540 [...] proc_reg_read+0x90/0x110 [...] __vfs_read+0x3c/0x70 [...] vfs_read+0xb4/0x1b0 [...] ksys_read+0x7c/0x130 [...] system_call+0x5c/0x70 Fix this by checking for a NULL pointer when describing such a key. Also make the read routine check for a NULL pointer to be on the safe side. [DH: Modified to not take already-held rcu lock and modified to also check in the read routine] Fixes: 04c567d9 ("[PATCH] Keys: Fix race between two instantiators of a key") Reported-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
-
Peter Zijlstra authored
[ Upstream commit 9b8bd476 ] Identical to __put_user(); the __get_user() argument evalution will too leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region. While uncommon this was observed to happen for: drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i])) where UBSAN added array bound checking. This complements commit: 6ae86561 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation") Tested-by Sedat Dilek <sedat.dilek@gmail.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: broonie@kernel.org Cc: sfr@canb.auug.org.au Cc: akpm@linux-foundation.org Cc: Randy Dunlap <rdunlap@infradead.org> Cc: mhocko@suse.cz Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.netSigned-off-by:
-
Wenwen Wang authored
[ Upstream commit 962411b0 ] If devm_request_irq() fails to disable all interrupts, no cleanup is performed before retuning the error. To fix this issue, invoke omap_dma_free() to do the cleanup. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.eduSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 2c231c0c ] In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then of_property_read_u32_array() is invoked to search for the property. However, if this process fails, 'rsv_events' is not deallocated, leading to a memory leak bug. To fix this issue, free 'rsv_events' before returning the error. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit e1e54ec7 ] In commit 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit eeb71c95 ] turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit 0f4cd769 ] When counting dispatched micro-ops with cnt_ctl=1, in order to prevent sample bias, IBS hardware preloads the least significant 7 bits of current count (IbsOpCurCnt) with random values, such that, after the interrupt is handled and counting resumes, the next sample taken will be slightly perturbed. The current count bitfield is in the IBS execution control h/w register, alongside the maximum count field. Currently, the IBS driver writes that register with the maximum count, leaving zeroes to fill the current count field, thereby overwriting the random bits the hardware preloaded for itself. Fix the driver to actually retain and carry those random bits from the read of the IBS control register, through to its write, instead of overwriting the lower current count bits with zeroes. Tested with: perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload> 'perf annotate' output before: 15.70 65: addsd %xmm0,%xmm1 17.30 add $0x1,%rax 15.88 cmp %rdx,%rax je 82 17.32 72: test $0x1,%al jne 7c 7.52 movapd %xmm1,%xmm0 5.90 jmp 65 8.23 7c: sqrtsd %xmm1,%xmm0 12.15 jmp 65 'perf annotate' output after: 16.63 65: addsd %xmm0,%xmm1 16.82 add $0x1,%rax 16.81 cmp %rdx,%rax je 82 16.69 72: test $0x1,%al jne 7c 8.30 movapd %xmm1,%xmm0 8.13 jmp 65 8.24 7c: sqrtsd %xmm1,%xmm0 8.39 jmp 65 Tested on Family 15h and 17h machines. Machines prior to family 10h Rev. C don't have the RDWROPCNT capability, and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't affect their operation. It is unknown why commit db98c5fa ("perf/x86: Implement 64-bit counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt field; the number of preloaded random bits has always been 7, AFAICT. Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
-
Josh Hunt authored
[ Upstream commit 44d3bbb6 ] We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in some cases when using perf: perfevents: irq loop stuck! WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530 ... RIP: 0010:intel_pmu_handle_irq+0x37b/0x530 ... Call Trace: <NMI> ? perf_event_nmi_handler+0x2e/0x50 ? intel_pmu_save_and_restart+0x50/0x50 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x6e/0x120 default_do_nmi+0x3e/0x100 do_nmi+0x102/0x160 end_repeat_nmi+0x16/0x50 ... ? native_write_msr+0x6/0x20 ? native_write_msr+0x6/0x20 </NMI> intel_pmu_enable_event+0x1ce/0x1f0 x86_pmu_start+0x78/0xa0 x86_pmu_enable+0x252/0x310 __perf_event_task_sched_in+0x181/0x190 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 finish_task_switch+0x158/0x260 __schedule+0x2f6/0x840 ? hrtimer_start_range_ns+0x153/0x210 schedule+0x32/0x80 schedule_hrtimeout_range_clock+0x8a/0x100 ? hrtimer_init+0x120/0x120 ep_poll+0x2f7/0x3a0 ? wake_up_q+0x60/0x60 do_epoll_wait+0xa9/0xc0 __x64_sys_epoll_wait+0x1a/0x20 do_syscall_64+0x4e/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fdeb1e96c03 ... Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 189308d5 ] A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by:
SteveM <swm@swm1.com> Signed-off-by:
-
zhaoyang authored
[ Upstream commit 5b3efa4f ] pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>] [46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>] [46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>] [46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>] [46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>] [46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>] (ret_fast_syscall+0x0/0x28) Signed-off-by:
Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 478228e5 ] It's safer to zero out the password so that it can never be disclosed. Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit f2aee329 ] RHBZ: 1710429 When we use a domain-key to authenticate using multiuser we must also set the domainnmame for the new volume as it will be used and passed to the server in the NTLMSSP Domain-name. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit d33d4beb ] Ensure we update the write result count on success, since the RPC call itself does not do so. Reported-by:
Jan Stancek <jstancek@redhat.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by:
-
Trond Myklebust authored
[ Upstream commit 71affe9b ] If we received a reply from the server with a zero length read and no error, then that implies we are at eof. Signed-off-by:
-
Thomas Jarosch authored
[ Upstream commit 3a069024 ] The find_pattern() debug output was printing the 'skip' character. This can be a NULL-byte and messes up further pr_debug() output. Output without the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8 kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8 Output with the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter! kernel: nf_conntrack_ftp: Match succeeded! kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645) kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8 Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 3e5bedc2 ] Rahul Tanwar reported the following bug on DT systems: > 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is > updated to the end of hardware IRQ numbers but this is done only when IOAPIC > configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is > a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration > comes from devicetree. > > See dtb_add_ioapic() in arch/x86/kernel/devicetree.c > > In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base' > remains to zero initialized value. This means that for OF based systems, > virtual IRQ base will get set to zero. Such systems will very likely not even boot. For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead. Reported-by:
Rahul Tanwar <rahul.tanwar@linux.intel.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Prashant Malani authored
[ Upstream commit f53a7ad1 ] get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by:
Prashant Malani <pmalani@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 0ff0f15a ] Multiple batadv_ogm2_packet can be stored in an skbuff. The functions batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there is another additional batadv_ogm2_packet in the skb or not before they continue processing the packet. The length for such an OGM2 is BATADV_OGM2_HLEN + batadv_ogm2_packet->tvlv_len. The check must first check that at least BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Doug Berger authored
[ Upstream commit c51bc12d ] A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33 ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit de0e4fd2 ] If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error. Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Christophe JAILLET authored
Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105 [ Upstream commit cd9d4ff9 ] This should be IDT77105, not IDT77015. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 17d8c5d1 ] Initialise the result count to 0 rather than initialising it to the argument count. The reason is that we want to ensure we record the I/O stats correctly in the case where an error is returned (for instance in the layoutstats). Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 90cf500e ] Currently, we are translating RPC level errors such as timeouts, as well as interrupts etc into EOPENSTALE, which forces a single replay of the open attempt. What we actually want to do is force the replay only in the cases where the returned error indicates that the file may have changed on the server. So the fix is to spell out the exact set of errors where we want to return EOPENSTALE. Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 91b4db53 ] "p runtime/jit: pass > 32bit index to tail_call" fails when bpf_jit_enable=1, because the tail call is not executed. This in turn is because the generated code assumes index is 64-bit, while it must be 32-bit, and as a result prog array bounds check fails, while it should pass. Even if bounds check would have passed, the code that follows uses 64-bit index to compute prog array offset. Fix by using clrj instead of clgrj for comparing index with array size, and also by using llgfr for truncating index to 32 bits before using it to compute prog array offset. Fixes: 6651ee07 ("s390/bpf: implement bpf_tail_call() helper") Reported-by:
Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Acked-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
