- 17 Oct, 2015 6 commits
-
-
Tony Cho authored
This patch removes typedef from the tstrInterfaceInfo and renames it to the wilc_vif. Signed-off-by:
Tony Cho <tony.cho@atmel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Cho authored
This patch removes typedef from the struct linux_wlan_t and renames it to the wilc. In addition, all of linux_wlan_t is replaced with struct wilc and memory allocation style is changed with preferred form as well like the following: p = kmalloc(sizeof(*p), ...) where "struct wilc" is used Signed-off-by:
-
Tony Cho authored
This patch removes extern declaration of g_linux_wlan from the followings because it is declared as extern in the wilc_wfi_netdevice.h file. - linux_mon.c - linux_wlan_sdio.c - wilc_wfi_cfgoperations.c Signed-off-by:
-
Shraddha Barke authored
kfree on NULL pointer is a no-op. The semantic patch used to find such an instance where NULL check is present before kfree- // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl>smpl> Signed-off-by:Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
enum scan_conn_timer and its instances are never used anywhere in the code so, remove it. Semantic patch used: @@ type T; identifier i; constant C; position p != e.p; @@ - T i@p; <+... when != i - i = C; ...+> Signed-off-by:
Shivani Bhardwaj <shivanib134@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.4b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new drivers, functionality and cleanups for IIO in the 4.4 cycle. Core stuff * adjust resistance documentation to allow for output devices. New device support: * bmc150 - split the i2c driver up into a core and i2c_regmap part including regmap conversion. - add spi support. * mcp4531 digitial potentiometer driver. * Measurement Specialties set of drivers with a core library module providing common functionality. Note that the htu21 has a driver in hwmon, but the view from that side was that, given the range of devices the same silicon turns up in are not all typical hwmon material, that driver would be deprecated in favour of this new support. - ms8607 temperature, pressure and humidty sensor - ms5637 temperature and pressure sensor - htu21 temperature and humidity sensor - tsys02d temperature sensor - tsys01 temperature sensor Cleanups * tree wide. - squish cases where irq 0 is still considered valid. * apds9960 - sparse endian warning cleanups by making endianness explicit. * ad5504 - leave group naming to the core. * ad7746 - cleanup comment style. - drop an unnecessary bit of dev_info - add some appropriate uses of the BIT macro. * ad799x - leave group naming to the core. * hdc100x - introduced this cycle,. - fix a wrong offset value. * lidar - add missing MODULE_DEVICE_TABLE for dt. * max1363 - leave sysfs group naming to the core. * m62332 got the Harmut treatment and as ever he found a 'few' bits the rest of us had missed! - Share scale and offset attributes across channels. - Shutdown the device on driver remove - Use ARRAY_SIZE rather than a hard coded count for channels. - Return more directly in the write_raw callback dropping a local variable along the way. - a few style issues - move to reading the regulator voltage for each use allowing for dynamic regulators. This is a common feature across drivers so we might end up with more fixes throughout the tree for this. * mlx96014 - introduced this cycle. - fixed up a spot of error handling. * vz89x - introduced this cycle. - work around a hardware quirk.
-
- 13 Oct, 2015 34 commits
-
-
Aybuke Ozdemir authored
Problem found using checkpatch.pl CHECK: Comparison to NULL could be written "key" Signed-off-by:
Aybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
Remove a cast which is not required. Signed-off-by:
-
Shivani Bhardwaj authored
Remove a NULL test on variable hif_drv as it is already preceded by one. Signed-off-by:
-
Shraddha Barke authored
Replace kmalloc and memset with a single call to kzalloc. Signed-off-by:
-
Paul Gortmaker authored
In a recent change, we made a bool into a tristate in: "drivers/staging: make android tegra_ion.c properly tristate", since it was self evident that was the original intention. However on the final link phase we'll see an allmodconfig fail with: ERROR: "ion_device_add_heap" [drivers/staging/android/ion/tegra/tegra_ion.ko] undefined! ERROR: "ion_heap_create" [drivers/staging/android/ion/tegra/tegra_ion.ko] undefined! ERROR: "ion_device_create" [drivers/staging/android/ion/tegra/tegra_ion.ko] undefined! ERROR: "ion_heap_destroy" [drivers/staging/android/ion/tegra/tegra_ion.ko] undefined! ERROR: "ion_device_destroy" [drivers/staging/android/ion/tegra/tegra_ion.ko] undefined! Export the above using the non GPL specific export, since that is what the rest of the ion code base does. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Arve Hjønnevåg" <arve@android.com> Cc: Riley Andrews <riandrews@android.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: devel@driverdev.osuosl.org Cc: linux-tegra@vger.kernel.org Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Lars Svensson authored
In fbtft-bus.c:fbtft_write_vmem16_bus9(), ioread8() is used for accessing the provided screen array. Since screen_buffer actually points to an ordinary buffer, instead access it directly. Signed-off-by:
Lars Svensson <lars1.svensson@sonymobile.com> Signed-off-by:
-
Lars Svensson authored
Member screen_base in struct fb_info is declared with __iomem qualifier causing sparse warnings when used as a regular ponter. To avoid the warnings, instead use alternate non-__iomem pointer, screen_buffer, troughout the driver. Signed-off-by:
-
Lars Svensson authored
Some drivers use member screen_base of struct fb_info to store non- __iomem pointers, creating the need for ugly __force typecasts to avoid sparse warnings. This adds an alternate pointer without the __iomem qualifyer for this use. Signed-off-by:
-
Dennis Menschel authored
This patch adds support for the C-Berry28, a small 2.8" color display with a resolution of 320x240 pixels from admatec for the Raspberry Pi. It uses the Sitronix ST7789V display controller along with a custom init sequence and custom gamma curves. Signed-off-by:
Dennis Menschel <menschel-d@posteo.de> Signed-off-by:
-
Dennis Menschel authored
This patch adds support for the Sitronix ST7789V display controller. The controller is intended for small color displays with a resolution of up to 320x240 pixels. Signed-off-by:
-
Anish Bhatt authored
Use the BIT(x) macro directly instead using multiple BITX defines. Signed-off-by:
Anish Bhatt <anish@gatech.edu> Signed-off-by:
-
Ian Abbott authored
Fix the checkpatch.pl issues: CHECK: spaces preferred around that '*' (ctx:VxV) Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
Fix the checkpatch.pl issues: CHECK: spinlock_t definition without comment CHECK: struct mutes definition withoug comment Signed-off-by:
-
Ian Abbott authored
If the "read" file operation handler, `comedi_read()` is passed 0 for the amount to read, some error conditions are currently skipped and the function just returns 0. Change it to check those error conditions and return an error value if appropriate. The trickiest case is the check for when the previously set up asynchronous command has terminated with an error. In that case, `-EPIPE` is returned (as it is for a read of non-zero length) and the subdevice gets marked as non-busy. A zero-length read that returns 0 has no other effects, in particular, it does not cause the subdevice to be marked as non-busy, and the return value does not indicate an "end-of-file" condition. Signed-off-by:
-
Ian Abbott authored
In order to perform a "read" file operation, an asynchronous COMEDI command in the "read" direction needs to have been set up by the current file object on the COMEDI "read" subdevice associated with the file object. If there is a "read" subdevice, but a command has not been set up by the file object (or is has been set-up in the wrong direction), `comedi_read()` currently returns one of two error values `-EINVAL` or `-EACCES`. `-EACCES` is returned if the command was set up by a different subdevice, or somewhat randomly, if a COMEDI "instruction" is currently being processed. `-EINVAL` is returned in other cases. Simplify it by returning `-EINVAL` for all these cases. Signed-off-by:
-
Ian Abbott authored
The "read" file operation handler, `comedi_read()` returns an error for pretty much any condition that prevents a "read" going ahead. One of the conditions that prevents a "read" going ahead is that no asynchronous command has been set up, but that currently results in a return value of 0 (unless COMEDI instructions are being processed or an asynchronous command has been set up by a different file object). Change it to return `-EINVAL` in this case. Signed-off-by:
-
Ian Abbott authored
`comedi_read()` initializes `retval` to 0. The other `retval = 0` assignments are superfluous, so remove them. Signed-off-by:
-
Ian Abbott authored
`comedi_read()` copies data from the acquisition data buffer, which is cyclic, to the user buffer using a single call to `copy_to_user()`. It currently avoids having to deal with wraparound of the cyclic buffer by limiting the amount it copies (and the amount returned to the user). Change it to deal with the wraparound using two calls to `copy_to_user()` if necessary. Signed-off-by:
-
Ian Abbott authored
At one point in `comedi_read()`, the variable `n` gets assigned to the minimum of the parameter `nbytes` and the amount of readable buffer space `m`. The way that is done currently is unsafe in the unlikely case that `nbytes` exceeds `UINT_MAX`, so fix it. Signed-off-by:
-
Ian Abbott authored
In `comedi_read()`, the `n` and `m` variables are of type `int`. Change them to `unsigned int` as they are used to measure a positive number of bytes. The `count` variable is also of type `int` and holds the returned number of bytes. Change it to type `ssize_t` to match the function's return type. Signed-off-by:
-
Ian Abbott authored
`comedi_read()` is the handler for the "read" file operation for COMEDI devices. It mostly runs without using the main mutex of the COMEDI device, but uses the `attach_lock` rwsemaphore to protect against the COMEDI device becoming "detached". A file object can read data resulting from a COMEDI asynchonous command if it initiated the command. The COMEDI subdevice is marked as busy when the command is started. At some point, the "read" handler detects that the command has terminated and all available data has been read and so marks the subdevice as non-busy. In order to mark the subdevice as non-busy, the "read" handler needs to release the `attach_lock` rwsemaphore and `acquire the main `mutex`. There is a vulnerable point between the two, so it checks that the device is still attached after acquiring the mutex. However, it does not currently check that the conditions for becoming non-busy still hold. Add some more checks that the subdevice is still busy with a command initiated by the same file object, that command is in the correct direction (in case the subdevice supports both "read" and "write"), that command has terminated, and has no data available to be read. Signed-off-by:
-
Ian Abbott authored
If an asynchronous "read" command is no longer running but the subdevice is still busy, it becomes non-busy once there is no more data available in the buffer. Some or all of the data written to the buffer might not have been "munged" yet, and it cannot be read until it has been munged by the writer. However, since the command is no longer running, we cannot expect any remaining unmunged data to get munged so we should ignore it. Call `comedi_buf_read_n_available()` to check the amount of munged data available to be read, replacing the call to `comedi_buf_n_bytes_ready()` which checked the amount of written (but possibly not yet munged) data available to be read. This affects both the "read" file operation (done in `comedi_read()`) and the `COMEDI_BUFINFO` ioctl handling (done in `do_bufinfo_ioctl()`). (The latter is used when data is transferred directly through the mmapped buffer instead of via the "read" file operation.) Signed-off-by:
-
Ian Abbott authored
If a COMEDI subdevice is busy handling an asynchronous command in the "read" direction, then after the command has terminated itself, the "read" file operation handler, `comedi_read()` should keep the subdevice busy until all available data has been read and it has returned 0 to indicate an "end-of-file" condition. Currently, it has a bug where it can mark the subdevice as non-busy even when returning a non-zero count. The bug is slightly hidden because the next "read" will return 0 because the subdevice is no longer busy. Fix it by checking the return count is 0 before deciding to mark the subdevice as non-busy. The call to `comedi_is_subdevice_idle()` is superfluous as the `become_nonbusy` variable will have been set to `true` when considering becoming non-busy. Strictly speaking, checking the return count is superfluous too, as `become_nonbusy` doesn't get set to `true` unless the count is 0, but check the return count anyway to make the intention clearer. Signed-off-by:
-
Ian Abbott authored
The main mutex in a comedi device can get held for quite a while when processing comedi instructions, so for performance reasons, the "read" and "write" file operations do not use it; they use use the `attach_lock` rwsemaphore to protect against the comedi device becoming detached at an inopportune moment. Do the same for the "poll" file operation. Signed-off-by:
-
Ian Abbott authored
Currently, the "poll" file operation checks if an asynchronous "read" (or "write" command is active on the "read" (or "write" subdevice, but does not consider whether the command was started from the file object being polled. Since that is the only file object able to read (or write) data, take it into consideration. With this change, if no read (or write) command is running on the subdevice, or it is started by a different file object, the file object is marked as readable (or writeable) regardless, but the read (or write) file operation will return an error. Signed-off-by:
-
Ian Abbott authored
When handling the "poll" file operation and checking for `POLLOUT`, don't allocate space from the buffer for writing, just check that space is available for writing. That check is done after checking that an asynchronous "write" command is running on the subdevice. Allocating the buffer space before checking a "write" command is running can cause problems if the subdevice supports commands in either direction and currently has an active "read" command. Signed-off-by:
-
Ian Abbott authored
Add a new function `comedi_buf_write_n_available()` to return the amount of buffer space available for writing, including space already allocated by `comedi_buf_write_alloc()` plus any unallocated space available. This is currently just for internal use by the comedi core, so is not exported. Signed-off-by:
-
Ian Abbott authored
Rename the local function `comedi_buf_write_n_available()` to `comedi_buf_write_n_unalloc()`. It is the amount of unallocated space available in the buffer that is available to be allocated for writing and does not include the space that has already been allocated for writing. This is unlike the exported function `comedi_buf_read_n_available()` which includes the space available to be allocated for reading plus the space already allocated for reading. The new name breaks the unintentional naming symmetry (and also clears the way for the old name to be reused for a new function). Signed-off-by:
-
Ian Abbott authored
Comedi subdevices that support asynchronous acquisition commands have a wait queue head used for blocking reads or writes and for the poll file operation. The comedi device may have several subdevices that support "read" and/or "write" commands, but each open file object has at most one "read" subdevice and one "write" subdevice. It's possible (though rare) for those to be the same subdevice if the subdevice supports commands in either direction. In that case, the "poll" file operation doesn't really need to do a `poll_wait()` on the same subdevice twice. Although harmless, it wastes a poll table entry. Check for that, and avoid it. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, rename these private data members to match the registers they are associated with. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, move this comment to follow the format of the other subdevices. Signed-off-by:
-
H Hartley Sweeten authored
The PC-CARD DAS16/16-AO board only has 4 digital I/O channels. The other boards supported by this driver have 8. Add the boardinfo to correctly initialize the subdevice. Signed-off-by:
-
H Hartley Sweeten authored
The hardware has an 8254 counter/timer to provide a pacer clock using counters 1 and 2. Counter 0 is available to the user. Hook up the subdevice support to allow the user to use counter 0. Signed-off-by:
-
H Hartley Sweeten authored
This driver currently code not support async commands. Remove the SDF_CMD_READ subdev_flag and len_chanlist initialization from the subdevice init. For aesthetics, rename the (*insn_read) function. Signed-off-by:
-
