- 15 Feb, 2008 13 commits
-
-
Stefano Brivio authored
This adds the firmware ID to modinfo. The patch by Michael Buesch has been ported to b43legacy. Signed-off-by:
Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
On the initial device-open we need to defer the hardware reconfiguration after we incremented the open_count, because the hw_config checks this flag and won't call the lowlevel driver in case it is zero. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Ivo van Doorn authored
Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Michael Buesch authored
The firmware version information should always get printed. Not only on a debug build. Signed-off-by:
-
Michael Buesch authored
This adds the firmware ID to modinfo. Signed-off-by:
-
Michael Buesch authored
This adds printk messages with basic information about the driver being loaded. This information includes a summary of the compiled-in features, which simplifies bug-reporting and debugging a lot. Also a firmware ID is printed. This is a unique identifier blob for a specific version of the firmware. This ID is attached to a specific version of the firmware blob in b43-fwcutter (see fwcutter git). This helps users to select the right firmware for their device. This also makes it possible to use automated scripts to fetch and extract the right firmware for the driver. (the script will grep the .ko for the "Firmware-ID: xxx" string. While the driver might still support other versions of the firmware for backward compatibility, this will always print out the officially supported version, which people _should_ use. Signed-off-by:
-
Stefano Brivio authored
This checks if the DMA address is bigger than what the controller can manage. It will reallocate the buffers in the GFP_DMA zone in that case. The patch by Michael Buesch has been ported to b43legacy. Thanks to Matti Viljanen for reporting this. Cc: Matti Viljanen <viljanen.matti@gmail.com> Signed-off-by:
-
Mohamed Abbas authored
Value of count is used to decide when to replenish rx buffers. If it is equal or above 8 we replenish the buffers. Ensure there is no starvation by initializing count to 8 - thus forcing replenish at first iteration. This is helpful when rx receives batches of buffers smaller than 8. Signed-off-by:
Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Gregory Greenman authored
This patch prevents sending host commands when rfkill is on Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Reinette Chatre authored
The geos information is set up during probe and should only be removed during pci_remove, not during _down. This is a temporary fix until the setting of the status bits have been cleaned up (to explicitly match all setting with clearing of status bits). Signed-off-by:
-
Jussi Kivilinna authored
Enable workaround for poor link stalls by link quality instead of link speed. Using link speed caused workaround be active always on 802.11b networks which reduced performance and not even catch all stalls. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Bruno Randolf authored
when setting up the tx descriptors for the hardware we must account for any padding between the header and the data we might have added previously. frame len is the length of the frame in the air (including FCS but no padding) and buffer len is the length of the buffer (including padding, but without FCS). changing the way ah_setup_tx_desc is called: now excluding the FCS, since it's easier to add that in the function where we need it. before this fix we sent trailing zero bytes after the packet (because frame len included the padding) which was not a big problem without WEP, but with WEP this resultes in a wrong WEP checksum and the packet is discarded - which is how i noticed at all ;) an easy way to run into header padding problems, btw, is to connect to a QoS (WME) enabled access point (eg. madwifi) - QoS data frames are 2 byte longer and will require padding. this patch applies on top of luis latest patch series from 04.02.2008. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by:
Bruno Randolf <bruno@thinktube.com> Signed-off-by:
-
John W. Linville authored
With assists from Russell King <rmk+kernel@arm.linux.org.uk> and Andrew Morton <akpm@linux-foundation.org>... Signed-off-by:
-
- 10 Feb, 2008 27 commits
-
-
Linus Torvalds authored
.. and I really need to call it something else. Maybe it is time to bring back the weasel series, since weasels always make me feel good about a kernel.
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] constify function pointer tables [ARM] 4823/1: AT91 section fix [ARM] 4824/1: pxa: clear RDH bit after any reset [ARM] pxa: remove debugging PM: printk ARM: OMAP1: Misc clean-up ARM: OMAP1: Update defconfigs for omap1 ARM: OMAP1: Palm Tungsten E board clean-up ARM: OMAP1: Use I2C bus registration helper for omap1 ARM: OMAP1: Remove omap_sram_idle() ARM: OMAP1: PM fixes for OMAP1 ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board ARM: OMAP1: Make omap1 use MMC multislot structures ARM: OMAP1: Change the comments to C style ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data ARM: OMAP: Add helper module for board specific I2C bus registration ARM: OMAP: Add dmtimer support for OMAP3 ARM: OMAP: Pre-3430 clean-up for dmtimer.c ARM: OMAP: Add DMA support for chaining and 3430 ARM: OMAP: Add 24xx GPIO debounce support ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code ...
-
Matthew Wilcox authored
We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ivan Kokshaysky authored
Thanks to Loic Prylli <loic@myri.com>, who originally proposed this idea. Always using legacy configuration mechanism for the legacy config space and extended mechanism (mmconf) for the extended config space is a simple and very logical approach. It's supposed to resolve all known mmconf problems. It still allows per-device quirks (tweaking dev->cfg_size). It also allows to get rid of mmconf fallback code. Signed-off-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [PKT_SCHED] ematch: Fix build warning.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: hrtimer: don't modify restart_block->fn in restart functions hrtimer: fix *rmtp/restarts handling in compat_sys_nanosleep() hrtimer: fix *rmtp handling in hrtimer_nanosleep() ntp: correct inconsistent interval/tick_length usage
-
Bastian Blank authored
Commit 8811930d ("splice: missing user pointer access verification") added the proper access_ok() calls to copy_from_user_mmap_sem() which ensures we can copy the struct iovecs from userspace to the kernel. But we also must check whether we can access the actual memory region pointed to by the struct iovec to fix the access checks properly. Signed-off-by:
Bastian Blank <waldi@debian.org> Acked-by:
Oliver Pinter <oliver.pntr@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
David S. Miller authored
Commit 954415e3 ("[PKT_SCHED] ematch: tcf_em_destroy robustness") removed a cast on em->data when passing it to kfree(), but em->data is an integer type that can hold pointers as well as other values so the cast is necessary. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleg Nesterov authored
hrtimer_nanosleep_restart() clears/restores restart_block->fn. This is pointless and complicates its usage. Note that if sys_restart_syscall() doesn't actually happen, we have a bogus "pending" restart->fn anyway, this is harmless. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Pavel Emelyanov <xemul@sw.ru> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Toyo Abe <toyoa@mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Oleg Nesterov authored
Spotted by Pavel Emelyanov and Alexey Dobriyan. compat_sys_nanosleep() implicitly uses hrtimer_nanosleep_restart(), this can't work. Make a suitable compat_nanosleep_restart() helper. Introduced by commit c70878b4 hrtimer: hook compat_sys_nanosleep up to high res timer code Also, set ->addr_limit = KERNEL_DS before doing hrtimer_nanosleep(), this func was changed by the previous patch and now takes the "__user *" parameter. Thanks to Ingo Molnar for fixing the bug in this patch. Signed-off-by:
-
Oleg Nesterov authored
Spotted by Pavel Emelyanov and Alexey Dobriyan. hrtimer_nanosleep() sets restart_block->arg1 = rmtp, but this rmtp points to the local variable which lives in the caller's stack frame. This means that if sys_restart_syscall() actually happens and it is interrupted as well, we don't update the user-space variable, but write into the already dead stack frame. Introduced by commit 04c22714 hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier Change the callers to pass "__user *rmtp" to hrtimer_nanosleep(), and change hrtimer_nanosleep() to use copy_to_user() to actually update *rmtp. Small problem remains. man 2 nanosleep states that *rtmp should be written if nanosleep() was interrupted (it says nothing whether it is OK to update *rmtp if nanosleep returns 0), but (with or without this patch) we can dirty *rem even if nanosleep() returns 0. NOTE: this patch doesn't change compat_sys_nanosleep(), because it has other bugs. Fixed by the next patch. Signed-off-by:
-
john stultz authored
clocksource initialization and error accumulation. This corrects a 280ppm drift seen on some systems using acpi_pm, and affects other clocksources as well (likely to a lesser degree). Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) [NET_SCHED] sch_htb: htb_requeue fix [IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric. starfire: secton fix via-velocity: section fix natsemi: section fix typhoon: section fix isdn: fix section mismatch warning for ISACVer isdn: fix section mismatch warnings from hisax_cs_setup_card isdn: fix section mismatch warnings in isac.c and isar.c isdn: fix section mismatch warning in hfc_sx.c [PKT_SCHED] ematch: tcf_em_destroy robustness [PKT_SCHED]: deinline functions in meta match [SCTP]: Convert sctp_dbg_objcnt to seq files. [SCTP]: Use snmp_fold_field instead of a homebrew analogue. [IGMP]: Optimize kfree_skb in igmp_rcv. [KEY]: Convert net/pfkey to use seq files. [KEY]: Clean up proc files creation a bit. pppol2tp: fix printk warnings bnx2: section fix bnx2x: section fix ...
-
Jarek Poplawski authored
htb_requeue() enqueues skbs for which htb_classify() returns NULL. This is wrong because such skbs could be handled by NET_CLS_ACT code, and the decision could be different than earlier in htb_enqueue(). So htb_requeue() is changed to work and look more like htb_enqueue(). Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Rami Rosen authored
This patch replaces the explicit usage of the magic constant "1024" with IP6_RT_PRIO_USER in the IPV6 tree. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/starfire.c:219: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
From: Andrew Morton <akpm@linux-foundation.org> gcc-3.4.4 on powerpc: drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict on this one I had to remove the __devinitdata too. Don't know why. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Andrew Morton authored
gcc-3.4.4 on powerpc: drivers/net/typhoon.c:137: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits) x86: cpa, strict range check in try_preserve_large_page() x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit x86: cpa, use page pool x86: introduce page pool in cpa x86: DEBUG_PAGEALLOC: enable after mem_init() brk: help text typo fix lguest: accept guest _PAGE_PWT page table entries x86 PM: update stale comments x86 PM: consolidate suspend and hibernation code x86 PM: rename 32-bit files in arch/x86/power x86 PM: move 64-bit hibernation files to arch/x86/power x86: trivial printk optimizations x86: fix early_ioremap pagetable ops x86: construct 32-bit boot time page tables in native format. x86, core: remove CONFIG_FORCED_INLINING x86: avoid unused variable warning in mm/init_64.c x86: fixup more paravirt fallout brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re: x86: fix sparse warnings in acpi/bus.c x86: fix sparse warning in topology.c ...
-
Sam Ravnborg authored
Fix following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x19723): Section mismatch in reference from the function ISACVersion() to the variable .devinit.data:ISACVer WARNING: drivers/isdn/hisax/built-in.o(.text+0x2005b): Section mismatch in reference from the function setup_avm_a1_pcmcia() to the function .devinit.text:setup_isac() ISACVer were only used from function annotated __devinit so add same annotation to ISACVer. One af the fererencing functions missed __devinit so add it and kill an additional warning. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Sam Ravnborg authored
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x722): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_teles3() WARNING: drivers/isdn/hisax/built-in.o(.text+0x72c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_s0box() WARNING: drivers/isdn/hisax/built-in.o(.text+0x736): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_telespci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x747): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_avm_pcipnp() WARNING: drivers/isdn/hisax/built-in.o(.text+0x74e): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_elsa() WARNING: drivers/isdn/hisax/built-in.o(.text+0x755): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_diva() WARNING: drivers/isdn/hisax/built-in.o(.text+0x75c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sedlbauer() WARNING: drivers/isdn/hisax/built-in.o(.text+0x763): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_s() WARNING: drivers/isdn/hisax/built-in.o(.text+0x76a): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcpci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x771): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcsx() WARNING: drivers/isdn/hisax/built-in.o(.text+0x778): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_niccy() WARNING: drivers/isdn/hisax/built-in.o(.text+0x77f): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_bkm_a4t() WARNING: drivers/isdn/hisax/built-in.o(.text+0x786): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sct_quadro() WARNING: drivers/isdn/hisax/built-in.o(.text+0x78d): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_gazel() WARNING: drivers/isdn/hisax/built-in.o(.text+0x794): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_w6692() WARNING: drivers/isdn/hisax/built-in.o(.text+0x79b): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_u() WARNING: drivers/isdn/hisax/built-in.o(.text+0x7a2): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_enternow_pci() checkcard() are the only user of hisax_cs_setup_card(). And checkcard is only used during init or when hot plugging ISDN devices. So annotate hisax_cs_setup_card() with __devinit. checkcard() is used by exported functions so it cannot be annotated __devinit. Annotate it with __ref so modpost ignore references to _devinit section. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: (24 commits) [SPARC]: Add solaris/sunos binary support to feature removal schedule. [SPARC]: Merge asm-sparc{,64}/a.out.h [SPARC]: Merge asm-sparc{,64}/fb.h [SPARC]: Merge asm-sparc{,64}/errno.h [SPARC]: Merge asm-sparc{,64}/emergency-restart.h [SPARC]: Merge asm-sparc{,64}/div64.h [SPARC]: Merge asm-sparc{,64}/device.h [SPARC]: Merge asm-sparc{,64}/current.h [SPARC]: Merge asm-sparc{,64}/cputime.h [SPARC]: Merge asm-sparc{,64}/cache.h [SPARC]: Merge asm-sparc{,64}/byteorder.h [SPARC]: Merge asm-sparc{,64}/bugs.h [SPARC]: Merge asm-sparc{,64}/bug.h [SPARC]: Kill BSD errno translation table and header files. [SPARC]: Merge asm-sparc{,64}/bpp.h [SPARC]: Merge include/asm-sparc{,64}/auxvec.h [SPARC]: Merge include/asm-sparc{,64}/of_device.h [SPARC]: Merge include/asm-sparc{,64}/prom.h [SPARC]: Remove of_platform_device_create [SPARC64]: Add kretprobe support. ...
-
Sam Ravnborg authored
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b276): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b286): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1fec7): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21669): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21671): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2991e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x29936): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2993e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisar() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e026): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e02e): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37813): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37823): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:initisac() initisar(), initisac() and clear_pending_isac_ints() were all used via a cardmsg fnction - which may be called ouside __devinit context. So remove the bogus __devinit annotation of the above three functions to fix the warnings. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add new "development flag" to the ext4 filesystem ext4: Don't panic in case of corrupt bitmap ext4: allocate struct ext4_allocation_context from a kmem cache JBD2: Clear buffer_ordered flag for barried IO request on success ext4: Fix Direct I/O locking ext4: Fix circular locking dependency with migrate and rm. allow in-inode EAs on ext4 root inode ext4: Fix null bh pointer dereference in mballoc ext4: Don't set EXTENTS_FL flag for fast symlinks JBD2: Use the incompat macro for testing the incompat feature. jbd2: Fix reference counting on the journal commit block's buffer head [PATCH] jbd: Remove useless loop when writing commit record jbd2: Add error check to journal_wait_on_commit_record to avoid oops
-
Sam Ravnborg authored
Fix the following warning: WARNING: drivers/isdn/hisax/built-in.o(.text+0x35818): Section mismatch in reference from the function hfcsx_card_msg() to the function .devinit.text:inithfcsx() hfcsx_card_msg() may be called outside __devinit context. Following the program logic is looks like the CARD_INIT branch will only be taken under __devinit context but to be consistent remove the __devinit annotation of inithfcsx() so we do not mix non-__devinit and __devinit code. Signed-off-by:
-
S.Çağlar Onur authored
Without this you get undefined symbol errors with CONFIG_SND=N: ERROR: "snd_pcm_period_elapsed" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_free" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_card_register" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined! Signed-off-by:
S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by:
-
