Convert the board-rx51 smc91x code to be generic and make
the boards to use it. This allows future recalculation of the
timings when the source clock gets scaled.

Also correct the rx51 interrupt to be IORESOURCE_IRQ_HIGHLEVEL.

Thanks to Paul Walmsley <paul@pwsan.com> for better GPMC timing
calculations.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add generic onenand support when connected to GPMC and make the
boards to use it.

The patch has been modified to make it more generic to support all
the boards with GPMC. The patch also remove unused prototype for
omap2_onenand_rephase(void).

Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC
and setting the GPMC timings in the bootloader. Setting the GPMC
timings in the bootloader will not allow supporting frequency
scaling for the onenand source clock.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Original OMAP DMA chaining design had chain_id as one of the callback
parameters. Patch 538528de changed it
to use logical channel instead.

Correct the naming for callback to also use logical channel number
instead of the chain_id.

More details are on this email thread:

http://marc.info/?l=linux-omap&m=122961071931459&w=2Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Implement transparent copy and constant fill features for OMAP2/3.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove unnecessary Kconfig line and allow compile of MBOX_FWK.
Also allow building USB on Nokia 770.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This email address is going to expire soon so update it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

If XSYNCERR or RSYNCERR interrupts are enabled, they are never
cleared causing the IRQ handler to be continuously called.
This patch clears the IRQs in question in the event they are
enabled and taken.
Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This increases VMALLOC_END to 0x18000000, making room for 256MB
RAM with the default 128MB vmalloc region.

Note that after this patch there's no longer a hole between vmalloc
space and the beginning of IO space on omap2 as the first virtual
mapping starts at 0xd8000000.

Also fold in a related change from Paul Walmsley <paul@pwsan.com>
to change the OMAP2_SRAM addresses accordingly.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch removes unnecessary omap2_globals and pass the global structures
directly as function argument.

The proposed cleanup was suggested by Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch removes fixes omap_sram_error() function and replace the
error paths with BUG_ON.

The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fixes the compiler warning "assignment from incompatible
pointer type"  in dmtimer.c and removes the tye casts. These warnings
were suppressed by type catsing.

The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We don't necessarily want to compile in irq.o and sdrc.o for omap4.
Also, clock and prcm may not be implemented initially.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Processor specific macros should be used instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>

It's currently unused, and processor specific defines should
be used instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Move define of OMAP2_VA_IC_BASE to be local to entry-macro.S
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove OMAP_PRM_REGADDR and use processor specific defines instead.

Also fold in a patch from Kevin Hilman to add _OFFSET #defines
for the PRCM registers to be used with the prm_[read|write]_* macros.
These are used extensively in the forthcoming OMAP PM support.

Also remove now unused OMAP2_PRM_BASE.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use processor specific defines instead.

As an extra bonus, this patch fixes the problem of CONFIG_DEBUG_SPINLOCK
calling sched_clock before we have things initialized:

http://patchwork.kernel.org/patch/15810/Signed-off-by: Tony Lindgren <tony@atomide.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt2sas: fix driver version inconsistency
  [SCSI] 3w-xxxx: scsi_dma_unmap fix
  [SCSI] 3w-9xxx: scsi_dma_unmap fix
  [SCSI] ses: fix problems caused by empty SES provided name
  [SCSI] fc-transport: Close state transition-window during rport deletion.
  [SCSI] initialize max_target_blocked in scsi_alloc_target
  [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Avoid open on possible directories since Samba now rejects them

Small change (mostly formatting) to limit lookup based open calls to
file create only.

After discussion yesteday on samba-technical about the posix lookup
regression,  and looking at a problem with cifs posix open to one
particular Samba version, Jeff and JRA realized that Samba server's
behavior changed in this area (posix open behavior on files vs.
directories).   To make this behavior consistent, JRA just made a
fix to Samba server to alter how it handles open of directories (now
returning the equivalent of EISDIR instead of success). Since we don't
know at lookup time whether the inode is a directory or file (and
thus whether posix open will succeed with most current Samba server),
this change avoids the posix open code on lookup open (just issues
posix open on creates).    This gets the semantic benefits we want
(atomicity, posix byte range locks, improved write semantics on newly
created files) and file create still is fast, and we avoid the problem
that Jeff noticed yesterday with "openat" (and some open directory
calls) of non-cached directories to one version of Samba server, and
will work with future Samba versions (which include the fix jra just
pushed into Samba server).  I confirmed this approach with jra
yesterday and with Shirish today.

Posix open is only called (at lookup time) for file create now.
For opens (rather than creates), because we do not know if it
is a file or directory yet, and current Samba no longer allows
us to do posix open on dirs, we could end up wasting an open call
on what turns out to be a dir. For file opens, we wait to call posix
open till cifs_open.  It could be added here (lookup) in the future
but the performance tradeoff of the extra network request when EISDIR
or EACCES is returned would have to be weighed against the 50%
reduction in network traffic in the other paths.
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Tested-by: Jeff Layton <jlayton@redhat.com>
CC: Jeremy Allison <jra@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Actually the icom driver is crashing when is being removed because
the driver is kfreeing the adapter structure before calling
pci_release_regions(), which result in the following error:

  Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33
  Faulting instruction address: 0xc000000000246b80
  Oops: Kernel access of bad area, sig: 11 [#1]
  ....
  [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable)
  [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68
  [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom]
  [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94
  [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom]
  [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90
  [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4
  [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c
  [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c
  [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80
  [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8
  [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom]
  [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8
  [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Cc: stable@kernel.org
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name
  ALSA: hda - fix audio on HP TX25xx series notebooks
  ALSA: pcsp - fix printk format warning again

* fix/misc:
  ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name
  ALSA: pcsp - fix printk format warning again

ALSA sound/core/control.c:232: Control name 'Sigmatel Surround Phase
Inversion Playback Switch' truncated to 'Sigmatel Surround Phase
Inversion Playback ' bootup message by omitting weird Sigmatel prefix
in this case; also fix up the related ca0106 mixer control removal
part by using identical naming there.
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix memory leak in nilfs_ioctl_clean_segments

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  via82cxxx: Add VIA VX855 PCI Device ID
  ide: report timeouts in ide_busy_sleep()
  ide: improve failed opcode reporting
  ide: fix printk() levels in ide_dump_ata[pi]_error()
  ide: fix OOPS during ide-cd error recovery
  ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] fix posix open regression

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: IP32: Remove unnecessary if not even harmful volatile keywords.
  MIPS: IP32: Fix build error due to uninitialized variable.
  MIPS: Fix sparse warning in incompatiable argument type of clear_user.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/maple: Add a quirk to disable MSI for IPR on Bimini

* 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  video: stop sh_mobile_lcdcfb only if started
  sh: ap325 camera without i2c driver fix

Instead of queuing IPMB messages before channel initialization, just
throw them away.  Nobody will be listening for them at this point,
anyway, and they will clog up the queue and nothing will be delivered
if we queue them.

Also set the current channel to the number of channels, as this value
is used to tell if the channel information has been initialized.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Ferenc Wagner <wferi@niif.hu>
Cc: Dan Frazier <dannf@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c,
as well as the 0x8409 south bridge ID.

This is required to make the IDE driver work on the VX855/VX875 integrated
chipset.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Bruce Chang <BruceChang@via.com.tw>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* change 'hwif' argument to 'drive'
* report an error on timeout
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Nowadays we (almost) always store the currently executing command
in hwif->cmd so we can use it for the failed opcode reporting.

Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fixes "<3>" in error messages like this one:

hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote:

>   hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
>   ide: failed opcode was: unknown
>   hdc: DMA disabled
>   ------------[ cut here ]------------
>   kernel BUG at drivers/ide/ide-io.c:872!

It is possible for ide-cd to ignore ide_error()'s return value under
some circumstances.  Workaround it in ide_intr() and ide_timer_expiry()
by checking if there is a device/port reset pending currently.

Fixes bug #13345:

	http://bugzilla.kernel.org/show_bug.cgi?id=13345Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk:

  commit 8588a2b7
  ("ide: add SH-S202J to ivb_list[]")

We also later added support for more such devices in:

  commit e97564f3
  ("ide: More TSST drives with broken cable detection")

and in:

  commit 3ced5c49
  ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]")

It turns out that such devices lack cable detection altogether
(which in turn results in incorrect detection of 40-wire cables
by our current cable detection strategy) so always handle them
by trusting host-side cable detection only.

v2:
Model detection fixup from Martin.
Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

They are unneeded and as the issue fixed in lmo commit
63f7ec59053e3f850ab67a9938e631bcba64c6ce shows even harmful.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

  CC      arch/mips/sgi-ip32/ip32-reset.o
cc1: warnings being treated as errors
arch/mips/sgi-ip32/ip32-reset.c: In function 'debounce':
arch/mips/sgi-ip32/ip32-reset.c:97: error: 'reg_a' is used uninitialized in this function

The issues is old but due to the volatile keyword gcc older than 4.4 did
not warn about this obvious bug.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>