- Make it clear that it's a negative errno (more in line with
  everything else).
- Clean up the confusion around get_properties vs. getproperty ioctls:
  One reads per-obj property values, the other reads property
  metadata.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.

So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Otherwise the connector might have been unplugged and destroyed while
we didn't look. Yet another fallout from DP MST hotplugging that I
didn't consider.

To make sure we get this right add an appropriate WARN_ON to
drm_atomic_state_clear (obviously only when we actually have a state
to clear up). And reorder all the state_clear and backoff calls to
make it work out properly.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

I've totally forgotten that with DP MST connectors can now be
hotplugged. And failed to adapt Rob's drm_atomic_state code (which
predates connector hotplugging) to the new realities.

The first step is to make sure that the connector indices used to
access the arrays of pointers are stable. The connection mutex gives
us enough guarantees for that, which means we won't unecessarily block
on concurrent modesets or background probing.

So add a locking WARN_ON and shuffle the code slightly to make sure we
always hold the right lock.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Let's make things a bit easier to debug when things go bad (potentially
under console_lock).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Andrew Morton wrote:
> On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote:
>
> > Andrew Morton wrote:
> > > Poor ttm guys - this is a bit of a trap we set for them.
> >
> > Commit a91576d7 ("drm/ttm: Pass GFP flags in order to avoid deadlock.")
> > changed to use sc->gfp_mask rather than GFP_KERNEL.
> >
> > -       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
> > -                       GFP_KERNEL);
> > +       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> >
> > But this bug is caused by sc->gfp_mask containing some flags which are not
> > in GFP_KERNEL, right? Then, I think
> >
> > -       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> > +       pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL);
> >
> > would hide this bug.
> >
> > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag)
>
> Well no - ttm_page_pool_free() should stop calling kmalloc altogether.
> Just do
>
> 	struct page *pages_to_free[16];
>
> and rework the code to free 16 pages at a time.  Easy.

Well, ttm code wants to process 512 pages at a time for performance.
Memory footprint increased by 512 * sizeof(struct page *) buffer is
only 4096 bytes. What about using static buffer like below?
----------
>From d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 13 Nov 2014 22:21:54 +0900
Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions.

Commit a91576d7 ("drm/ttm: Pass GFP flags in order to avoid
deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags
which are not in GFP_KERNEL.

  https://bugzilla.kernel.org/show_bug.cgi?id=87891

Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would
avoid the BUG_ON(), but avoiding memory allocation from shrinker
function is better and reliable fix.

Shrinker function is already serialized by global lock, and
clean up function is called after shrinker function is unregistered.
Thus, we can use static buffer when called from shrinker function
and clean up function.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

sizeof(u8) is always 1.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit f9b9faf6d94dd29eab8c128905c7d091f955481d "drm: flip-work: change
drm_flip_work_init prototype" changed the drm_flip_work_init prototype
to a void function, which makes 'ret' an unused variable.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Implement crtc page_flip callback for bochsdrm.  The qemu stdvga has no
vblank signaling, so we have to fake it.  We do so by instantly calling
drm_send_vblank_event.  Tested with kmscon.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Remove the mapping offset from the bo backing the fbdev framebuffer.
Wire up fbdev mmap function to map the backing bo using ttm_fbdev_mmap.
With that patch in place mmap(/dev/fb0) works as expected.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Recently (qemu 2.2+) the qemu stdvga got a register to switch the vga
framebuffer endianness.  This patch adds code to explicitly set the
endianness of the framebuffer.  In most cases this has no effect as
the default is guest architecture endianness.  It is needed though in
case a architecture supports both big and little endian, i.e. for
ppc64le.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Drop some leftover, commented code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Main pull for 3.19.  I may have another pull in a few days with some
mdp5 bits (and hopefully mdp5 atomic), but I figured there was no need
to hold up what we have already.  Main highlights so far:

1) a4xx gpu support (userspace gallium bits on mesa master)
2) mdp4/hdmi/core bits for atomic helpers.  Still missing mdp5
conversion, main hold up there is current hard-coded mixer setup isn't
clever enough to deal with disabling primary plane while crtc active.
3) various other misc cleanup/fixes/etc..

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (21 commits)
  drm/msm: a4xx support for msm-drm
  drm/msm: Handle register offset differences between a3xx and a4xx
  drm/msm: small mmap offset cleanups
  drm/msm/mdp4: atomic
  drm/msm/hdmi: atomic
  drm/msm: atomic core bits
  drm/msm: bit of fb error checking
  drm/msm: fb prepare/cleanup
  drm/msm: remove unused compile-test stub
  drm/msm: small fence cleanup
  drm/msm/mdp5: drop attached planes table
  drm/msm/mdp4: drop attached planes table
  drm/msm/mdp4: don't care about fb in crtc
  drm/msm/mdp5: drop private primary ptr
  drm/msm/mdp4: drop private primary ptr
  drm/msm: Fix fbdev for 16- and 24-bit modes.
  drm/msm: Allow exported dma-bufs to be mapped
  drm/msm/hdmi: refactor bind/init
  drm/msm: update generated headers
  drm/msm/adreno: slight init order cleanup
  ...

Added a4xx GPU support.
Signed-off-by: Aravind Ganesan <aravindg@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Register offsets have changed between a3xx and a4xx GPUs.
To be able access these registers in common code, we create
a lookup table, and set of read-write APIs to access the
register through the lookup table.
Signed-off-by: Aravind Ganesan <aravindg@codeaurora.org>
[robclark: remove REG_ADRENO_UNDEFINED, just use zero, and minor
tweaks for latest generated headers]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Use pre-computed iova when unmapping, to reduce the places we assume iova
and mmap offset are (at the moment) the same.  And get rid of an extra
drm_gem_free_mmap_offset() call (since it is already called from
drm_gem_object_release())
Signed-off-by: Rob Clark <robdclark@gmail.com>

Convert mdp4 display controller backend to atomic helpers.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

The core parts for async commit.
Signed-off-by: Rob Clark <robdclark@gmail.com>

It's a problem that can't happen yet, since we don't support any
multi-planar formats yet.  But let's avoid nasty surprises when the
time comes.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Atomic wants to split the prepare/pin from where we actually program the
scanout address (so that any part that can fail is done synchronously).
Add some fb/gem apis to make this easier to use from the kms parts.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Give ourselves a way to wait for certain fence #..  makes it easier to
wait on a set of bo's, which we'll need for atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Simplify things a bit for atomic, gets rid of some bookkeeping, and
makes the code cleaner.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Simplify things a bit for atomic, gets rid of some bookkeeping, and
makes the code cleaner.

TODO move iterator macro somewhere common.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since we are configuring things via MDP4_PIPE regs in the plane, it seems
like setting the dimensions of the primary plane on the OVLP/DMA regs in
crtc is unnecessary.  This will make life easier when we want to do a
nofb modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Currently forcing the video mode from the kernel command line (for example
video=HDMI-A-1:1280x720-16@60) does not correctly set the number of bits
per pixel. This is due to a rather aggressive override in
msm_fbdev_create(). This is a particular problem for Android bring up
because the software EGL fallbacks don't support 32bpp.

Since the overrides are actually the default values anyway then this
problem can be trivially fixed by removing the overrides completely.

Change was tested by dd'ing a test image to /dev/fb0 with no video=
(still 32bpp), video=1920x1080-32@60, video=1920x1080-24@60 and
video=1920x1080-16@60 .
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Currently msm does not implement gem_prime_mmap. Without this it is not
possible to draw onto a dma-buf from userspace (making its very hard to
implement the Android rendering model).

Fixing this is just a matter of adding a little boilerplate.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Split up hdmi_init() into hdmi_init() (done at hdmi sub-device
bind/probe time) and hdmi_modeset_init() done from master driver's
modeset_init().

Anything that can fail due to dependencies on other drivers which
may be missing or not probed yet should go in hdmi_init(), so that
devm error/cleanup paths work properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Move anything that can fail after call to base class msm_gpu_init().
This way, if we fail, active_list has already been initialized so we
don't trip 'WARN_ON(!list_empty(&gpu->active_list))' in
msm_gpu_cleanup().
Signed-off-by: Rob Clark <robdclark@gmail.com>

Fixes a potential error, spotted by Felipe with randconfig:

-----
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c: In function ‘mdp4_kms_init’:
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:2: error: implicit declaration \
        of function ‘devm_regulator_get_exclusive’ [-Werror=implicit-function-declaration]
  mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
  ^
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:16: error: assignment makes \
        pointer from integer without a cast [-Werror]
  mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
                ^
-----

Also add a brief comment explaining the use of _get_exclusive()
Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This was pointless, forgot to remove the code.
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input

Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.

The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).

This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.

Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.

* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
  drm/cma: Remove call to drm_gem_free_mmap_offset()
  drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
  drm/rcar: gem: dumb: pitch is an output
  drm/omap: gem: dumb: pitch is an output
  drm/cma: Introduce drm_gem_cma_dumb_create_internal()
  drm/doc: Add GEM/CMA helpers to kerneldoc
  drm/doc: mm: Fix indentation
  drm/gem: Fix a few kerneldoc typos

This passes the guest preferences for a where to place the
outputs through to userspace. Userspace would need to be updated
to take note of this information, X server and GNOME.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.

v2: rename properties to be more consistent.
Signed-off-by: Dave Airlie <airlied@redhat.com>

While looking through drm_crtc.c to double-check make locking changes
I've noticed that there's a few other places that would now benefit
from simplified return value handling.

So let's flatten the control flow and replace and always 0 ret with 0
where possible.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tegra: Changes for v3.19-rc1

The highlights in this pull request are:

  * IOMMU support: The Tegra DRM driver can now deal with discontiguous
    buffers if an IOMMU exists in the system. That means it can allocate
    using drm_gem_get_pages() and will map them into IOVA space via the
    IOMMU API. Similarly, non-contiguous PRIME buffers can be imported
    from a different driver, which allows better integration with gk20a
    (nouveau) and less hacks.

  * Universal planes: This is precursory work for atomic modesetting and
    will allow hardware cursor support to be implemented on pre-Tegra114
    where RGB cursors were not supported.

  * DSI ganged-mode support: The DSI controller can now gang up with a
    second DSI controller to drive high resolution DSI panels.

Besides those bigger changes there is a slew of fixes, cleanups, plugged
memory leaks and so on.

* tag 'drm/tegra/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (44 commits)
  drm/tegra: gem: Check before freeing CMA memory
  drm/tegra: fb: Add error codes to error messages
  drm/tegra: fb: Properly release GEM objects on failure
  drm/tegra: Detach panel when a connector is removed
  drm/tegra: Plug memory leak
  drm/tegra: gem: Use more consistent data types
  drm/tegra: fb: Do not destroy framebuffer
  drm/tegra: gem: dumb: pitch and size are outputs
  drm/tegra: Enable the hotplug interrupt only when necessary
  drm/tegra: dc: Universal plane support
  drm/tegra: dc: Registers are 32 bits wide
  drm/tegra: dc: Factor out DC, window and cursor commit
  drm/tegra: Add IOMMU support
  drm/tegra: Fix error handling cleanup
  drm/tegra: gem: Use dma_mmap_writecombine()
  drm/tegra: gem: Remove redundant drm_gem_free_mmap_offset()
  drm/tegra: gem: Cleanup tegra_bo_create_with_handle()
  drm/tegra: gem: Extract tegra_bo_alloc_object()
  drm/tegra: dsi: Set up PHY_TIMING & BTA_TIMING registers earlier
  drm/tegra: dsi: Replace 1000000 by USEC_PER_SEC
  ...