- 18 Dec, 2009 4 commits
-
-
Paul E. McKenney authored
commit 281d150c upstream. Impose a clear locking design on non-NO_HZ handling of the ->completed counter. This increases the distance between the RCU and the CPU-hotplug mechanisms. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12571987491353-git-send-email-> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jay Fenlason authored
commit 8c0c0cc2 upstream. Queueing to receive an ISO packet with a payload length of zero silently does nothing in dualbuffer mode, and crashes the kernel in packet-per-buffer mode. Return an error in dualbuffer mode, because the DMA controller won't let us do what we want, and work correctly in packet-per-buffer mode. Signed-off-by:
Jay Fenlason <fenlason@redhat.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
zhao.ming9@zte.com.cn authored
commit 8d87cacd upstream. This patch adds ZTE modem devices. Signed-off-by:
Ming Zhao <zhao.ming9@zte.com.cn> Signed-off-by:
-
Alan Stern authored
commit f3f6faa9 upstream. This patch (as1312) fixes a minor bug in usb-storage. The fill_inquiry() routine neglects to pre-load the inquiry data buffer with spaces. As a result, if the vendor name is shorter than 8 characters or the product name is shorter than 16, the remainder will be filled with garbage. The patch also removes some unnecessary calls to strlen(). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 14 Dec, 2009 35 commits
-
-
Greg Kroah-Hartman authored
-
Theodore Ts'o authored
(cherry picked from commit fab3a549) Fix the following potential circular locking dependency between mm->mmap_sem and ei->i_data_sem: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-04115-gec044c5 #37 ------------------------------------------------------- ureadahead/1855 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff81107224>] might_fault+0x5c/0xac but task is already holding lock: (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem){++++..}: [<ffffffff81099bfa>] __lock_acquire+0xb67/0xd0f [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81516633>] down_read+0x51/0x84 [<ffffffff811a2414>] ext4_get_blocks+0x50/0x2a5 [<ffffffff811a3453>] ext4_get_block+0xab/0xef [<ffffffff81154f39>] do_mpage_readpage+0x198/0x48d [<ffffffff81155360>] mpage_readpages+0xd0/0x114 [<ffffffff811a104b>] ext4_readpages+0x1d/0x1f [<ffffffff810f8644>] __do_page_cache_readahead+0x12f/0x1bc [<ffffffff810f86f2>] ra_submit+0x21/0x25 [<ffffffff810f0cfd>] filemap_fault+0x19f/0x32c [<ffffffff81107b97>] __do_fault+0x55/0x3a2 [<ffffffff81109db0>] handle_mm_fault+0x327/0x734 [<ffffffff8151aaa9>] do_page_fault+0x292/0x2aa [<ffffffff81518205>] page_fault+0x25/0x30 [<ffffffff812a34d8>] clear_user+0x38/0x3c [<ffffffff81167e16>] padzero+0x20/0x31 [<ffffffff81168b47>] load_elf_binary+0x8bc/0x17ed [<ffffffff81130e95>] search_binary_handler+0xc2/0x259 [<ffffffff81166d64>] load_script+0x1b8/0x1cc [<ffffffff81130e95>] search_binary_handler+0xc2/0x259 [<ffffffff8113255f>] do_execve+0x1ce/0x2cf [<ffffffff81027494>] sys_execve+0x43/0x5a [<ffffffff8102918a>] stub_execve+0x6a/0xc0 -> #0 (&mm->mmap_sem){++++++}: [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81107251>] might_fault+0x89/0xac [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157 [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1 [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159 [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6 [<ffffffff811392ca>] sys_ioctl+0x56/0x79 [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 1 lock held by ureadahead/1855: #0: (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159 stack backtrace: Pid: 1855, comm: ureadahead Not tainted 2.6.32-04115-gec044c5 #37 Call Trace: [<ffffffff81098c70>] print_circular_bug+0xa8/0xb7 [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f [<ffffffff8102f229>] ? sched_clock+0x9/0xd [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff81107251>] might_fault+0x89/0xac [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff81124b44>] ? __kmalloc+0x13b/0x18c [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157 [<ffffffff811bca0b>] ? ext4_ext_fiemap_cb+0x0/0x157 [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1 [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159 [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6 [<ffffffff8129f6d0>] ? __up_read+0x8d/0x95 [<ffffffff81517fb5>] ? retint_swapgs+0x13/0x1b [<ffffffff811392ca>] sys_ioctl+0x56/0x79 [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit 4a58579b) This patch fixes three problems in the handling of the EXT4_IOC_MOVE_EXT ioctl: 1. In current EXT4_IOC_MOVE_EXT, there are read access mode checks for original and donor files, but they allow the illegal write access to donor file, since donor file is overwritten by original file data. To fix this problem, change access mode checks of original (r->r/w) and donor (r->w) files. 2. Disallow the use of donor files that have a setuid or setgid bits. 3. Call mnt_want_write() and mnt_drop_write() before and after ext4_move_extents() calling to get write access to a mount. Signed-off-by:
Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by:
-
Jan Kara authored
(cherry picked from commit b436b9be) We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 194074ac) Inside ->setattr() call both ATTR_UID and ATTR_GID may be valid This means that we may end-up with transferring all quotas. Add we have to reserve QUOTA_DEL_BLOCKS for all quotas, as we do in case of QUOTA_INIT_BLOCKS. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 5aca07eb) Currently all quota block reservation macros contains hard-coded "2" aka MAXQUOTAS value. This is no good because in some places it is not obvious to understand what does this digit represent. Let's introduce new macro with self descriptive name. Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 8aa6790f) Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Acked-by:
-
Curt Wohlgemuth authored
(cherry picked from commit b844167e) This fixes a leak of blocks in an inode prealloc list if device failures cause ext4_mb_mark_diskspace_used() to fail. Signed-off-by:
Curt Wohlgemuth <curtw@google.com> Acked-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Josef Bacik authored
(cherry picked from commit d4edac31) There is a potential race when a transaction is committing right when the file system is being umounting. This could reduce in a race because EXT4_SB(sb)->s_group_info could be freed in ext4_put_super before the commit code calls a callback so the mballoc code can release freed blocks in the transaction, resulting in a panic trying to access the freed s_group_info. The fix is to wait for the transaction to finish committing before we shutdown the multiblock allocator. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Jan Kara authored
(cherry picked from commit b9a4207d) When ext4_write_begin fails after allocating some blocks or generic_perform_write fails to copy data to write, we truncate blocks already instantiated beyond i_size. Although these blocks were never inside i_size, we have to truncate the pagecache of these blocks so that corresponding buffers get unmapped. Otherwise subsequent __block_prepare_write (called because we are retrying the write) will find the buffers mapped, not call ->get_block, and thus the page will be backed by already freed blocks leading to filesystem and data corruption. Signed-off-by:
-
Roel Kluin authored
(cherry picked from commit c09eef30) Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit e6ec116b) OOM happens. Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit ac48b0a1) Integrate duplicate lines (acquire/release semaphore and invalidate extent cache in move_extent_per_page()) into mext_replace_branches(), to reduce source and object code size. Signed-off-by:
-
Kazuya Mio authored
(cherry picked from commit 446aaa6e) The move_extent.moved_len is used to pass back the number of exchanged blocks count to user space. Currently the caller must clear this field; but we spend more code space checking for this requirement than simply zeroing the field ourselves, so let's just make life easier for everyone all around. Signed-off-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit 94d7c16c) At the beginning of ext4_move_extent(), we call ext4_discard_preallocations() to discard inode PAs of orig and donor inodes. But in the following case, blocks can be double freed, so move ext4_discard_preallocations() to the end of ext4_move_extents(). 1. Discard inode PAs of orig and donor inodes with ext4_discard_preallocations() in ext4_move_extents(). orig : [ DATA1 ] donor: [ DATA2 ] 2. While data blocks are exchanging between orig and donor inodes, new inode PAs is created to orig by other process's block allocation. (Since there are semaphore gaps in ext4_move_extents().) And new inode PAs is used partially (2-1). 2-1 Create new inode PAs to orig inode orig : [ DATA1 | used PA1 | free PA1 ] donor: [ DATA2 ] 3. Donor inode which has old orig inode's blocks is deleted after EXT4_IOC_MOVE_EXT finished (3-1, 3-2). So the block bitmap corresponds to old orig inode's blocks are freed. 3-1 After EXT4_IOC_MOVE_EXT finished orig : [ DATA2 | free PA1 ] donor: [ DATA1 | used PA1 ] 3-2 Delete donor inode orig : [ DATA2 | free PA1 ] donor: [ FREE SPACE(DATA1) | FREE SPACE(used PA1) ] 4. The double-free of blocks is occurred, when close() is called to orig inode. Because ext4_discard_preallocations() for orig inode frees used PA1 and free PA1, though used PA1 is already freed in 3. 4-1 Double-free of blocks is occurred orig : [ DATA2 | FREE SPACE(free PA1) ] donor: [ FREE SPACE(DATA1) | DOUBLE FREE(used PA1) ] Signed-off-by:
-
Eric Sandeen authored
(cherry picked from commit e3bb52ae) Users on the linux-ext4 list recently complained about differences across filesystems w.r.t. how to mount without a journal replay. In the discussion it was noted that xfs's "norecovery" option is perhaps more descriptively accurate than "noload," so let's make that an alias for ext4. Also show this status in /proc/mounts Signed-off-by:
-
Eric Sandeen authored
(cherry picked from commit 5328e635) It is anticipated that when sb_issue_discard starts doing real work on trim-capable devices, we may see issues. Make this mount-time optional, and default it to off until we know that things are working out OK. Signed-off-by:
-
Jan Kara authored
(cherry picked from commit 2bba702d) When an error happened in ext4_splice_branch we failed to notice that in ext4_ind_get_blocks and mapped the buffer anyway. Fix the problem by checking for error properly. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 6b17d902) We don't to issue an I/O barrier on an error or if we force commit because we are doing data journaling. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 1032988c) The block validity checks used by ext4_data_block_valid() wasn't correctly written to check file systems with the meta_bg feature. Fix this. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 8dadb198) The number of old-style block group descriptor blocks is s_meta_first_bg when the meta_bg feature flag is set. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 3f8fb949) commit a71ce8c6 updated ext4_statfs() to update the on-disk superblock counters, but modified this buffer directly without any journaling of the change. This is one of the accesses that was causing the crc errors in journal replay as seen in kernel.org bugzilla #14354. Signed-off-by:
-
Eric Sandeen authored
(cherry picked from commit 86ebfd08) ext4_xattr_set_handle() was zeroing out an inode outside of journaling constraints; this is one of the accesses that was causing the crc errors in journal replay as seen in kernel.org bugzilla #14354. Reviewed-by:
Andreas Dilger <adilger@sun.com> Signed-off-by:
-
Julia Lawall authored
(cherry picked from commit 30c6e07a) We need to be testing the i_flags field in the ext4 specific portion of the inode, instead of the (confusingly aliased) i_flags field in the generic struct inode. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 50689696) When an inode gets unlinked, the functions ext4_clear_blocks() and ext4_remove_blocks() call ext4_forget() for all the buffer heads corresponding to the deleted inode's data blocks. If the inode is a directory or a symlink, the is_metadata parameter must be non-zero so ext4_forget() will revoke them via jbd2_journal_revoke(). Otherwise, if these blocks are reused for a data file, and the system crashes before a journal checkpoint, the journal replay could end up corrupting these data blocks. Thanks to Curt Wohlgemuth for pointing out potential problems in this area. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 567f3e9a) One of the invalid error paths in ext4_iget() forgot to brelse() the inode buffer head. Fix it by adding a brelse() in the common error return path, which also simplifies function. Thanks to Andi Kleen <ak@linux.intel.com> reporting the problem. Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit 49bd22bc) If CONFIG_PROVE_LOCKING is enabled, the double_down_write_data_sem() will trigger a false-positive warning of a recursive lock. Since we take i_data_sem for the two inodes ordered by their inode numbers, this isn't a problem. Use of down_write_nested() will notify the lock dependency checker machinery that there is no problem here. This problem was reported by Brian Rogers: http://marc.info/?l=linux-ext4&m=125115356928011&w=1Reported-by:
Brian Rogers <brian@xyzw.org> Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit fc04cb49) ext4_move_extents() checks the logical block contiguousness of original file with ext4_find_extent() and mext_next_extent(). Therefore the extent which ext4_ext_path structure indicates must not be changed between above functions. But in current implementation, there is no i_data_sem protection between ext4_ext_find_extent() and mext_next_extent(). So the extent which ext4_ext_path structure indicates may be overwritten by delalloc. As a result, ext4_move_extents() will exchange wrong blocks between original and donor files. I change the place where acquire/release i_data_sem to solve this problem. Moreover, I changed move_extent_per_page() to start transaction first, and then acquire i_data_sem. Without this change, there is a possibility of the deadlock between mmap() and ext4_move_extents(): * NOTE: "A", "B" and "C" mean different processes A-1: ext4_ext_move_extents() acquires i_data_sem of two inodes. B: do_page_fault() starts the transaction (T), and then tries to acquire i_data_sem. But process "A" is already holding it, so it is kept waiting. C: While "A" and "B" running, kjournald2 tries to commit transaction (T) but it is under updating, so kjournald2 waits for it. A-2: Call ext4_journal_start with holding i_data_sem, but transaction (T) is locked. Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit f868a48d) If the EXT4_IOC_MOVE_EXT ioctl fails, the number of blocks that were exchanged before the failure should be returned to the userspace caller. Unfortunately, currently if the block size is not the same as the page size, the returned block count that is returned is the page-aligned block count instead of the actual block count. This commit addresses this bug. Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 503358ae) If s_log_groups_per_flex is greater than 31, then groups_per_flex will will overflow and cause a divide by zero error. This can cause kernel BUG if such a file system is mounted. Thanks to Nageswara R Sastry for analyzing the failure and providing an initial patch. http://bugzilla.kernel.org/show_bug.cgi?id=14287Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit 2de770a4) Previously add_dirent_to_buf() did not free its passed-in buffer head in the case of ENOSPC, since in some cases the caller still needed it. However, this led to potential buffer head leaks since not all callers dealt with this correctly. Fix this by making simplifying the freeing convention; now add_dirent_to_buf() *never* frees the passed-in buffer head, and leaves that to the responsibility of its caller. This makes things cleaner and easier to prove that the code is neither leaking buffer heads or calling brelse() one time too many. Signed-off-by:
-
Yang, Bo authored
commit 7b2519af upstream. The current sense pointer is cast to a u32 pointer, which can truncate on 64 bits. Fix by using unsigned long instead. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Martin Michlmayr authored
commit 08996386 upstream. include/scsi/osd_protocol.h uses ALIGN() without an #include <linux/kernel.h>, leading to: | include/scsi/osd_protocol.h:362: error: implicit declaration of function 'ALIGN' Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
James Bottomley authored
commit d139b9bd upstream. Some of our virtual SCSI hosts don't have a proper bus parent at the top, which can be a problem for doing DMA on them This patch makes the host device cache a pointer to the physical bus device and provides an extra API for setting it (the normal API picks it up from the parent). This patch also modifies the qla2xxx and lpfc vport logic to use the new DMA host setting API. Acked-By:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 2a855dd0 upstream. All architectures in the kernel increment/decrement the stack pointer before storing values on the stack. On architectures which have the stack grow down sas_ss_sp == sp is not on the alternate signal stack while sas_ss_sp + sas_ss_size == sp is on the alternate signal stack. On architectures which have the stack grow up sas_ss_sp == sp is on the alternate signal stack while sas_ss_sp + sas_ss_size == sp is not on the alternate signal stack. The current implementation fails for architectures which have the stack grow down on the corner case where sas_ss_sp == sp.This was reported as Debian bug #544905 on AMD64. Simplified test case: http://download.breakpoint.cc/tc-sig-stack.c The test case creates the following stack scenario: 0xn0300 stack top 0xn0200 alt stack pointer top (when switching to alt stack) 0xn01ff alt stack end 0xn0100 alt stack start == stack pointer If the signal is sent the stack pointer is pointing to the base address of the alt stack and the kernel erroneously decides that it has already switched to the alternate stack because of the current check for "sp - sas_ss_sp < sas_ss_size" On parisc (stack grows up) the scenario would be: 0xn0200 stack pointer 0xn01ff alt stack end 0xn0100 alt stack start = alt stack pointer base (when switching to alt stack) 0xn0000 stack base This is handled correctly by the current implementation. [ tglx: Modified for archs which have the stack grow up (parisc) which would fail with the correct implementation for stack grows down. Added a check for sp >= current->sas_ss_sp which is strictly not necessary but makes the code symetric for both variants ] Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> LKML-Reference: <20091025143758.GA6653@Chamillionaire.breakpoint.cc> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 03 Dec, 2009 1 commit
-
-
Linus Torvalds authored
-
