Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

WARNING: vmlinux.o(.text+0x2066f0): Section mismatch: reference to .init.text:.add_preferred_console (between '.hvc_rtas_console_init' and '.hvc_beat_put_chars')
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some HW platforms, such as the new cell blades, requires some MPIC sources
to be left alone by the operating system. This implements support for
a "protected-sources" property in the mpic controller node containing a list
of source numbers to be protected against operating system interference.

For those interested in the gory details, the MPIC on the southbridge of
those blades has some of the processor outputs routed to the cell, and
at least one routed as a GPIO to the service processor. It will be used
in the GA product for routing some of the southbridge error interrupts
to the service processor which implements some of the RAS stuff, such
as checkstopping when fatal errors occurs before they can propagate.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

...since it modifies it (when it sets the OF_DETACHED flag).
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The recent signal rework broke ARCH=ppc builds with the following
error:

CC      arch/powerpc/kernel/signal.o
arch/powerpc/kernel/signal.c: In function ‘do_signal’:
arch/powerpc/kernel/signal.c:142: error: implicit declaration of
function ‘set_dabr’
make[1]: *** [arch/powerpc/kernel/signal.o] Error 1

This fixes it by including a function prototype in asm-ppc/system.h.
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This removes the requirement for callers to get_cpu() to check in simple
cases.  i386 and x86_64 already received a similar treatment.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Classic 32-bit PowerPC CPUs, and the early 64-bit PowerPC CPUs, don't
provide a way to prevent execution from readable pages, that is, the
MMU doesn't distinguish between data reads and instruction reads,
although a different exception is taken for faults in data accesses
and instruction accesses.

Commit 9ba4ace3, in the course of
fixing another bug, added a check that meant that a page fault due
to an instruction access would fail if the vma did not have the
VM_EXEC flag set.  This gives an inconsistent enforcement on these
CPUs of the no-execute status of the vma (since reading from the page
is sufficient to allow subsequent execution from it), and causes old
versions of ppc32 glibc (2.2 and earlier) to fail, since they rely
on executing the word before the GOT but don't have it marked
executable.

This fixes the problem by allowing execution from readable (or writable)
areas on CPUs which do not provide separate control over data and
instruction reads.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Jon Loeliger <jdl@freescale.com>

Move firmware feature initialisation from pSeries_init_early to the
earlier pSeries_probe_hypertas so they are initialised before firmware
feature fixups are applied.

Currently firmware feature sections are only used for iSeries which
initialises the these features much earlier.  This is a bug in waiting
on pSeries.

Also adds some whitespace fixups.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In some configuration, xmon help string is larger than xmon_printf
buffer.  We need not to use printf.  This patch adds xmon_puts and
change to use it to show help string.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Because xmon_write doesn't change the buffer, we should add 'const'
qualifier to the argument which points it.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The config symbol for SPE support is called CONFIG_SPU_BASE, not
CONFIG_SPE_BASE.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

__free_page() wants a struct page, not a virtual address.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: make sure to clear the error interrupt
  mmc: at91_mci: wakeup on card insertion (or removal)
  mmc: add maintainer for at91

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: fix section mismatch warning in mdesc.c
  [SPARC64]: fix section mismatch warning in pci_sunv4
  [SPARC64]: Stop using drivers/char/rtc.c
  [SPARC64]: Convert parport to of_platform_driver.
  [SPARC]: Implement fb_is_primary_device().
  [SPARC64]: Fix virq decomposition.
  [SPARC64]: Use KERN_ERR in IRQ manipulation error printks.
  [SPARC64]: Do not flood log with failed DS messages.
  [SPARC64]: Add proper multicast support to VNET driver.
  [SPARC64]: Handle multiple domain-services-port nodes properly.
  [SPARC64]: Improve VIO device naming further.
  [SPARC]: Make sure dev_archdata is filled in for all devices.
  [SPARC]: Define minimal struct dev_archdata, similarly to sparc64.
  [SPARC]: Fix serial console device detection.

Fix following warning:
WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free')

Rename mdesc_mem_ops to *_ops so modpost ignores __init references
and declare mdesc_bootmem_alloc __init since it is only used
during __init context.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix following warning:
WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init')

pci_sun4v_pbm_init and sun4v_pci_init was only used under __init
context so declare them _init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing sparc64 mini_rtc driver can handle CMOS based
rtcs trivially with just a few lines of code and the simplifies
things tremendously.

Tested on SB1500.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The dev_handle and dev_ino fields don't match up exactly to
the traditional IMAP_IGN and IMAP_INO masks.

So store them away in a table and look them up directly.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

When booting up a control node it's quite common to
not be able to register several service types.

And likewise on guests at least one or two are going
to not be there.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The best scheme to get uniqueness seems to be:

FOO			-- If node lacks "id" property
FOO-$(ID)		-- If node has "id" but parent lacks "cfg-handle"
FOO-$(ID)-$(CFG_HANDLE) -- If node has both
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading module
  V4L/DVB (5877): radio-gemtek-pci: remove unused structure member
  V4L/DVB (5871): Conexant 2388x: check for kthread_run
  V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.
  V4L/DVB (5867): videodev2.h: add missing <sys/time.h> for userspace
  V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another stream
  V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffies
  V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134
  V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam drivers
  V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeout
  V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers
  V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio drivers
  V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.
  V4L/DVB (5854): ivtv: cleanup of driver messages
  V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.
  V4L/DVB (5852): ivtv: don't recompile needlessly
  V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config option
  V4L/DVB (5850): ivtv: improve API command debugging
  V4L/DVB (5848): Av7110: fix typo

We ignore all the generated files called "vmlinux*" from the top-level
gitignore, but that also ends up catching a few files that we track, and
that people do edit.  Notably the "vmlinux.lds.S" file, that each
architecture has.

You can always use "git add -f" to override the ignore file, but we
might as well just make it explicit for this file.
Bitten-by-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits)
  [CELL] spufs: rework list management and associated locking
  [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
  [CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks
  [CELL] spu_base: locking cleanup
  [CELL] cell: indexing of SPUs based on firmware vicinity properties
  [CELL] spufs: integration of SPE affinity with the scheduller
  [CELL] cell: add placement computation for scheduling of affinity contexts
  [CELL] spufs: extension of spu_create to support affinity definition
  [CELL] cell: add hardcoded spu vicinity information for QS20
  [CELL] cell: add vicinity information on spus
  [CELL] cell: add per BE structure with info about its SPUs
  [CELL] spufs: use find_first_bit() instead of sched_find_first_bit()
  [CELL] spufs: remove unused file argument from spufs_run_spu()
  [CELL] spufs: change decrementer restore timing
  [CELL] spufs: dont halt decrementer at restore step 47
  [CELL] spufs: limit saving MFC_CNTL bits
  [CELL] spufs: fix read and write for decr_status file
  [CELL] spufs: fix decr_status meanings
  [CELL] spufs: remove needless context save/restore code
  [CELL] spufs: fix array size of channel index
  ...

State struct was never freed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The drivers reads the PCI subsystem ID into its state structure, but it's
never used anywhere.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The patch adds checking of kthread_run return code and issues a message
if it fails.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it 
should check whether the passed control ID is valid and return 0 if it 
isn't. Otherwise a for-loop over the control IDs will never end.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>