Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix a couple of quite severe issues for the CQE request path

  MMC host:
   - alcor: Fix a resource leak in the error path for ->probe()
   - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
   - sdhci-pci-gli: Fix system resume support for GL975x
   - sdhci-pci-gli: Fix reboot error for GL9750"

* tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
  mmc: block: Fix request completion in the CQE timeout path
  mmc: core: Fix recursive locking issue in CQE recovery path
  mmc: core: Check request type before completing the request
  mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
  mmc: alcor: Fix a resource leak in the error path for ->probe()
  mmc: sdhci-pci-gli: Fix no irq handler from suspend

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: add missing functions declarations to kasan.h
  kasan: consistently disable debugging features
  ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
  userfaultfd: fix remap event with MREMAP_DONTUNMAP
  mm/gup: fix fixup_user_fault() on multiple retries
  epoll: call final ep_events_available() check under the lock
  mm, memcg: fix inconsistent oom event behavior

Pull thread fix from Christian Brauner:
 "This contains a single fix for all exported legacy fork helpers to
  block accidental access to clone3() features in the upper 32 bits of
  their respective flags arguments.

  I got Cced on a glibc issue where someone reported consistent failures
  for the legacy clone() syscall on ppc64le when sign extension was
  performed (since the clone() syscall in glibc exposes the flags
  argument as an int whereas the kernel uses unsigned long).

  The legacy clone() syscall is odd in a bunch of ways and here two
  things interact:

   - First, legacy clone's flag argument is word-size dependent, i.e.
     it's an unsigned long whereas most system calls with flag arguments
     use int or unsigned int.

   - Second, legacy clone() ignores unknown and deprecated flags.

  The two of them taken together means that users on 64bit systems can
  pass garbage for the upper 32bit of the clone() syscall since forever
  and things would just work fine.

  The following program compiled on a 64bit kernel prior to v5.7-rc1
  will succeed and will fail post v5.7-rc1 with EBADF:

    int main(int argc, char *argv[])
    {
          pid_t pid;

          /* Note that legacy clone() has different argument ordering on
           * different architectures so this won't work everywhere.
           *
           * Only set the upper 32 bits.
           */
          pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
                        NULL, NULL, NULL, NULL);
          if (pid < 0)
                  exit(EXIT_FAILURE);
          if (pid == 0)
                  exit(EXIT_SUCCESS);
          if (wait(NULL) != pid)
                  exit(EXIT_FAILURE);

          exit(EXIT_SUCCESS);
    }

  Since legacy clone() couldn't be extended this was not a problem so
  far and nobody really noticed or cared since nothing in the kernel
  ever bothered to look at the upper 32 bits.

  But once we introduced clone3() and expanded the flag argument in
  struct clone_args to 64 bit we opened this can of worms. With the
  first flag-based extension to clone3() making use of the upper 32 bits
  of the flag argument we've effectively made it possible for the legacy
  clone() syscall to reach clone3() only flags on accident. The sign
  extension scenario is just the odd corner-case that we needed to
  figure this out.

  The reason we just realized this now and not already when we
  introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that
  a valid cgroup file descriptor has been given - whereas
  CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently
  resets the signal handlers to SIG_DFL.

  So the sign extension (or the user accidently passing garbage for the
  upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the
  kernel to error out when it didn't find a valid cgroup file
  descriptor.

  Note, I'm also capping kernel_thread()'s flag argument mainly because
  none of the new features make sense for kernel_thread() and we
  shouldn't risk them being accidently activated however unlikely. If we
  wanted to, we could even make kernel_thread() yell when an unknown
  flag has been set which it doesn't do right now. But it's not worth
  risking this in a bugfix imho"

* tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: prevent accidental access to clone3 features

Pull more tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - Fix a crash when having function tracing and function stack tracing
     on the command line.

     The ftrace trampolines are created as executable and read only. But
     the stack tracer tries to modify them with text_poke() which
     expects all kernel text to still be writable at boot. Keep the
     trampolines writable at boot, and convert them to read-only with
     the rest of the kernel.

   - A selftest was triggering in the ring buffer iterator code, that is
     no longer valid with the update of keeping the ring buffer writable
     while a iterator is reading.

     Just bail after three failed attempts to get an event and remove
     the warning and disabling of the ring buffer.

   - While modifying the ring buffer code, decided to remove all the
     unnecessary BUG() calls"

* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Remove all BUG() calls
  ring-buffer: Don't deactivate the ring buffer on failed iterator reads
  x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up

Pull power management fix from Rafael Wysocki:
 "Prevent the suspend-to-idle internal loop from busy spinning after a
  spurious ACPI SCI wakeup in some cases"

* tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()

KASAN is currently missing declarations for __asan_report* and __hwasan*
functions.  This can lead to compiler warnings.
Reported-by: Leon Romanovsky <leon@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Leon Romanovsky <leon@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/45b445a76a79208918f0cc44bfabebaea909b54d.1589297433.git.andreyknvl@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KASAN is incompatible with some kernel debugging/tracing features.

There's been multiple patches that disable those feature for some of
KASAN files one by one.  Instead of prolonging that, disable these
features for all KASAN files at once.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Link: http://lkml.kernel.org/r/29bd753d5ff5596425905b0b07f51153e2345cc1.1589297433.git.andreyknvl@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase
position index") is causing this bug (seen on 5.6.8):

   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages

   # ipcmk -Q
   Message queue id: 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0

   # ipcmk -Q
   Message queue id: 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcrm -q 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 2
   # ipcrm -q 2
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 3
   # ipcrm -q 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0

Whenever an IPC item with a low id is deleted, the items with higher ids
are duplicated, as if filling a hole.

new_pos should jump through hole of unused ids, pos can be updated
inside "for" cycle.

Fixes: 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A user is not required to set a new address when using MREMAP_DONTUNMAP
as it can be used without MREMAP_FIXED.  When doing so the remap event
will use new_addr which may not have been set and we didn't propagate it
back other then in the return value of remap_to.

Because ret is always the new address it's probably more correct to use
it rather than new_addr on the remap_event_complete call, and it
resolves this bug.

Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: http://lkml.kernel.org/r/20200506172158.218366-1-bgeffon@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This part was overlooked when reworking the gup code on multiple
retries.

When we get the 2nd+ retry, we'll be with TRIED flag set.  Current code
will bail out on the 2nd retry because the !TRIED check will fail so the
retry logic will be skipped.  What's worse is that, it will also return
zero which errornously hints the caller that the page is faulted in
while it's not.

The !TRIED flag check seems to not be needed even before the mutliple
retries change because if we get a VM_FAULT_RETRY, it must be the 1st
retry, and we should not have TRIED set for that.

Fix it by removing the !TRIED check, at the meantime check against fatal
signals properly before the page fault so we can still properly respond
to the user killing the process during retries.

Fixes: 4426e945 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Link: http://lkml.kernel.org/r/20200502003523.8204-1-peterx@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a possible race when ep_scan_ready_list() leaves ->rdllist and
->obflist empty for a short period of time although some events are
pending.  It is quite likely that ep_events_available() observes empty
lists and goes to sleep.

Since commit 339ddb53 ("fs/epoll: remove unnecessary wakeups of
nested epoll") we are conservative in wakeups (there is only one place
for wakeup and this is ep_poll_callback()), thus ep_events_available()
must always observe correct state of two lists.

The easiest and correct way is to do the final check under the lock.
This does not impact the performance, since lock is taken anyway for
adding a wait entry to the wait queue.

The discussion of the problem can be found here:

   https://lore.kernel.org/linux-fsdevel/a2f22c3c-c25a-4bda-8339-a7bdaf17849e@akamai.com/

In this patch barrierless __set_current_state() is used.  This is safe
since waitqueue_active() is called under the same lock on wakeup side.

Short-circuit for fatal signals (i.e.  fatal_signal_pending() check) is
moved to the line just before actual events harvesting routine.  This is
fully compliant to what is said in the comment of the patch where the
actual fatal_signal_pending() check was added: c257a340 ("fs, epoll:
short circuit fetching events if thread has been killed").

Fixes: 339ddb53 ("fs/epoll: remove unnecessary wakeups of nested epoll")
Reported-by: Jason Baron <jbaron@akamai.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Baron <jbaron@akamai.com>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200505145609.1865152-1-rpenyaev@suse.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A recent commit 9852ae3f ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.

But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2.  In cgroup1, it is displayed in memory.oom_control.  The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg.  That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.

Here's an example on why this behavior is inconsistent in cgroup1.

       root memcg
       /
    memcg foo
     /
  memcg bar

Suppose there's an oom_kill in memcg bar, then the oon_kill will be

       root memcg : memory.oom_control(oom_kill)  0
       /
    memcg foo : memory.oom_control(oom_kill)  1
     /
  memcg bar : memory.oom_control(oom_kill)  1

For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill.  That means, memory.oom_control(oom_kill) has
different meanings in different memcgs.  That is inconsistent.  Then the
user has to know whether the memcg is root or not.

If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.

Fixes: 9852ae3f ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a lot of checks to make sure the ring buffer is working, and if an
anomaly is detected, it safely shuts itself down. But there's a few cases
that it will call BUG(), which defeats the point of being safe (it crashes
the kernel when an anomaly is found!). There's no reason for them. Switch
them all to either WARN_ON_ONCE() (when no ring buffer descriptor is present),
or to RB_WARN_ON() (when a ring buffer descriptor is present).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

If the function tracer is running and the trace file is read (which uses the
ring buffer iterator), the iterator can get in sync with the writes, and
caues it to fail to find a page with content it can read three times. This
causes a warning and deactivation of the ring buffer code.

Looking at the other cases of failure to get an event, it appears that
there's a chance that the writer could cause them too. Since the iterator is
a "best effort" to read the ring buffer if there's an active writer (the
consumer reader is made for this case "see trace_pipe"), if it fails to get
an event after three tries, simply give up and return NULL. Don't warn, nor
disable the ring buffer on this failure.

Link: https://lore.kernel.org/r/20200429090508.GG5770@shao2-debianReported-by: kernel test robot <lkp@intel.com>
Fixes: ff84c50c ("ring-buffer: Do not die if rb_iter_peek() fails more than thrice")
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Booting one of my machines, it triggered the following crash:

 Kernel/User page tables isolation: enabled
 ftrace: allocating 36577 entries in 143 pages
 Starting tracer 'function'
 BUG: unable to handle page fault for address: ffffffffa000005c
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0003) - permissions violation
 PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
 Oops: 0003 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 RIP: 0010:text_poke_early+0x4a/0x58
 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
 RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
 FS:  0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
 Call Trace:
  text_poke_bp+0x27/0x64
  ? mutex_lock+0x36/0x5d
  arch_ftrace_update_trampoline+0x287/0x2d5
  ? ftrace_replace_code+0x14b/0x160
  ? ftrace_update_ftrace_func+0x65/0x6c
  __register_ftrace_function+0x6d/0x81
  ftrace_startup+0x23/0xc1
  register_ftrace_function+0x20/0x37
  func_set_flag+0x59/0x77
  __set_tracer_option.isra.19+0x20/0x3e
  trace_set_options+0xd6/0x13e
  apply_trace_boot_options+0x44/0x6d
  register_tracer+0x19e/0x1ac
  early_trace_init+0x21b/0x2c9
  start_kernel+0x241/0x518
  ? load_ucode_intel_bsp+0x21/0x52
  secondary_startup_64+0xa4/0xb0

I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".

The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.

Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.

Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae440 ("x86/ftrace: Use text_poke()")
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull tracing fixes from Steven Rostedt:
 "Fixes to previous fixes.

  Unfortunately, the last set of fixes introduced some minor bugs:

   - The bootconfig apply_xbc() leak fix caused the application to
     return a positive number on success, when it should have returned
     zero.

   - The preempt_irq_delay_thread fix to make the creation code wait for
     the kthread to finish to prevent it from executing after module
     unload, can now cause the kthread to exit before it even executes
     (preventing it to run its tests).

   - The fix to the bootconfig that fixed the initrd to remove the
     bootconfig from causing the kernel to panic, now prints a warning
     that the bootconfig is not found, even when bootconfig is not on
     the command line"

* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Fix to prevent warning message if no bootconfig option
  tracing: Wait for preempt irq delay thread to execute
  tools/bootconfig: Fix apply_xbc() to return zero on success

Pull GPIO fixes from Linus Walleij:
 "Some GPIO fixes for v5.7, slightly overdue. Been learning MMUs and
  KASan that is why it's late. Bartosz helped me out, luckily!

   - Fix pin configuration in the PCA953x driver

   - Ruggedize the watch/unwatch ioctl()

   - Possible call to a sleeping function when holding a spinlock, avoid
     this

   - Fix UML builds with DT overlays

   - Mask Tegra GPIO IRQs during shutdown()"

* tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: tegra: mask GPIO IRQs during IRQ shutdown
  gpio: of: Build fails if CONFIG_OF_DYNAMIC enabled without CONFIG_OF_GPIO
  gpiolib: don't call sleeping functions with a spinlock taken
  gpiolib: improve the robustness of watch/unwatch ioctl()
  gpio: pca953x: Fix pca953x_gpio_set_config

Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes.

  Fixes for bugs prior to v5.7:
   - Fix random block reads when reading fragmented journals (v5.2)
   - Fix a possible random memory access in gfs2_walk_metadata (v5.3)

  Fixes for v5.7:
   - Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances
   - Fix several bugs in the new filesystem withdraw logic"

* tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Don't demote a glock until its revokes are written"
  gfs2: If go_sync returns error, withdraw but skip invalidate
  gfs2: Grab glock reference sooner in gfs2_add_revoke
  gfs2: don't call quota_unhold if quotas are not locked
  gfs2: move privileged user check to gfs2_quota_lock_check
  gfs2: remove check for quotas on in gfs2_quota_check
  gfs2: Change BUG_ON to an assert_withdraw in gfs2_quota_change
  gfs2: Fix problems regarding gfs2_qa_get and _put
  gfs2: More gfs2_find_jhead fixes
  gfs2: Another gfs2_walk_metadata fix
  gfs2: Fix use-after-free in gfs2_logd after withdraw
  gfs2: Fix BUG during unmount after file system withdraw
  gfs2: Fix error exit in do_xmote
  gfs2: fix withdraw sequence deadlock

Commit de462e5f ("bootconfig: Fix to remove bootconfig
data from initrd while boot") causes a cosmetic regression
on dmesg, which warns "no bootconfig data" message without
bootconfig cmdline option.

Fix setup_boot_config() by moving no bootconfig check after
commandline option check.

Link: http://lkml.kernel.org/r/9b1ba335-071d-c983-89a4-2677b522dcc8@molgen.mpg.de
Link: http://lkml.kernel.org/r/158916116468.21787.14558782332170588206.stgit@devnote2

Fixes: de462e5f ("bootconfig: Fix to remove bootconfig data from initrd while boot")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

A bug report was posted that running the preempt irq delay module on a slow
machine, and removing it quickly could lead to the thread created by the
modlue to execute after the module is removed, and this could cause the
kernel to crash. The fix for this was to call kthread_stop() after creating
the thread to make sure it finishes before allowing the module to be
removed.

Now this caused the opposite problem on fast machines. What now happens is
the kthread_stop() can cause the kthread never to execute and the test never
to run. To fix this, add a completion and wait for the kthread to execute,
then wait for it to end.

This issue caused the ftracetest selftests to fail on the preemptirq tests.

Link: https://lore.kernel.org/r/20200510114210.15d9e4af@oasis.local.home

Cc: stable@vger.kernel.org
Fixes: d16a8c31 ("tracing: Wait for preempt irq delay thread to finish")
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The return of apply_xbc() returns the result of the last write() call, which
is not what is expected. It should only return zero on success.

Link: https://lore.kernel.org/r/20200508093059.GF9365@kadam

Fixes: 88426044 ("tools/bootconfig: Fix resource leak in apply_xbc()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull nfsd fixes from Chuck Lever:
 "Resolve a data integrity problem with NFSD that I inadvertently
  introduced last year.

  The change I made makes the NFS server's duplicate reply cache
  ineffective when krb5i or krb5p are in use, thus allowing the replay
  of non-idempotent NFS requests such as RENAME, SETATTR, or even
  WRITEs"

* tag 'nfsd-5.7-rc-2' of git://git.linux-nfs.org/projects/cel/cel-2.6:
  SUNRPC: Revert 241b1f41 ("SUNRPC: Remove xdr_buf_trim()")
  SUNRPC: Fix GSS privacy computation of auth->au_ralign
  SUNRPC: Add "@len" parameter to gss_unwrap()

As reported by Amarnath Baliyase, the drm_mode_status enumeration
documentation describes MODE_V_ILLEGAL as "mode has illegal horizontal
timings".  But that's just a cut-and-paste error from the previous line.
The "V" stands for vertical, of course.

I'm just fixing this directly rather than bothering with going through
the proper channels.  Less work for everybody.
Reported-by: Amarnath Baliyase <baliyaseamarnath@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The AMD eMMC 5.0 controller does not support 64 bit DMA.

Fixes: 34597a3f ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://marc.info/?l=linux-mmc&m=158879884514552&w=2Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200508165344.1.Id5bb8b1ae7ea576f26f9d91c761df7ccffbf58c5@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

If the EC GPE status is not set after checking all of the other GPEs,
acpi_s2idle_wake() returns 'false', to indicate that the SCI event
that has just triggered is not a system wakeup one, but it does that
without canceling the pending wakeup and re-arming the SCI for system
wakeup which is a mistake, because it may cause s2idle_loop() to busy
spin until the next valid wakeup event.  [If that happens, the first
spurious wakeup is still pending after acpi_s2idle_wake() has
returned, so s2idle_enter() does nothing, acpi_s2idle_wake()
is called again and it sees that the SCI has triggered, but no GPEs
are active, so 'false' is returned again, and so on.]

Fix that by moving all of the GPE checking logic from
acpi_s2idle_wake() to acpi_ec_dispatch_gpe() and making the
latter return 'true' only if a non-EC GPE has triggered and
'false' otherwise, which will cause acpi_s2idle_wake() to
cancel the pending SCI wakeup and re-arm the SCI for system
wakeup regardless of the EC GPE status.

This also addresses a lockup observed on an Elitegroup EF20EA laptop
after attempting to wake it up from suspend-to-idle by a key press.

Fixes: d5406284 ("ACPI: PM: s2idle: Refine active GPEs check")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207603Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Link: https://lore.kernel.org/linux-acpi/CAB4CAwdqo7=MvyG_PE+PGVfeA17AHF5i5JucgaKqqMX6mjArbQ@mail.gmail.com/Reported-by: Chris Chiu <chiu@endlessm.com>
Tested-by: Chris Chiu <chiu@endlessm.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Ensure that direct mapping alias is always flushed when changing
     page attributes. The optimization for small ranges failed to do so
     when the virtual address was in the vmalloc or module space.

   - Unbreak the trace event registration for syscalls without arguments
     caused by the refactoring of the SYSCALL_DEFINE0() macro.

   - Move the printk in the TSC deadline timer code to a place where it
     is guaranteed to only be called once during boot and cannot be
     rearmed by clearing warn_once after boot. If it's invoked post boot
     then lockdep rightfully complains about a potential deadlock as the
     calling context is different.

   - A series of fixes for objtool and the ORC unwinder addressing
     variety of small issues:

       - Stack offset tracking for indirect CFAs in objtool ignored
         subsequent pushs and pops

       - Repair the unwind hints in the register clearing entry ASM code

       - Make the unwinding in the low level exit to usermode code stop
         after switching to the trampoline stack. The unwind hint is no
         longer valid and the ORC unwinder emits a warning as it can't
         find the registers anymore.

       - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
         which caused objtool to generate bogus ORC data.

       - Prevent unwinder warnings when dumping the stack of a
         non-current task as there is no way to be sure about the
         validity because the dumped stack can be a moving target.

       - Make the ORC unwinder behave the same way as the frame pointer
         unwinder when dumping an inactive tasks stack and do not skip
         the first frame.

       - Prevent ORC unwinding before ORC data has been initialized

       - Immediately terminate unwinding when a unknown ORC entry type
         is found.

       - Prevent premature stop of the unwinder caused by IRET frames.

       - Fix another infinite loop in objtool caused by a negative
         offset which was not catched.

       - Address a few build warnings in the ORC unwinder and add
         missing static/ro_after_init annotations"

* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
  x86/apic: Move TSC deadline timer debug printk
  ftrace/x86: Fix trace event registration for syscalls without arguments
  x86/mm/cpa: Flush direct map alias during cpa
  objtool: Fix infinite loop in for_offset_range()
  x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
  x86/unwind/orc: Fix error path for bad ORC entry type
  x86/unwind/orc: Prevent unwinding before ORC initialization
  x86/unwind/orc: Don't skip the first frame for inactive tasks
  x86/unwind: Prevent false warnings for non-current tasks
  x86/unwind/orc: Convert global variables to static
  x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
  x86/entry/64: Fix unwind hints in __switch_to_asm()
  x86/entry/64: Fix unwind hints in kernel exit path
  x86/entry/64: Fix unwind hints in register clearing code
  objtool: Fix stack offset tracking for indirect CFAs

Pull objtool fix from Thomas Gleixner:
 "A single fix for objtool to prevent an infinite loop in the
  jump table search which can be triggered when building the
  kernel with '-ffunction-sections'"

* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix infinite loop in find_jump_table()

Pull locking fix from Thomas Gleixner:
 "A single fix for the fallout of the recent futex uacess rework.

  With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser()
  correctly and emits a 'maybe unitialized' warning. While we usually
  ignore compiler stupidity the conditional store is pointless anyway
  because the correct case has to store. For the fault case the extra
  store does no harm"

* tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM: futex: Address build warning

Pull iommu fixes from Joerg Roedel:

 - Race condition fixes for the AMD IOMMU driver.

   These are five patches fixing two race conditions around
   increase_address_space(). The first race condition was around the
   non-atomic update of the domain page-table root pointer and the
   variable containing the page-table depth (called mode). This is fixed
   now be merging page-table root and mode into one 64-bit field which
   is read/written atomically.

   The second race condition was around updating the page-table root
   pointer and making it public before the hardware caches were flushed.
   This could cause addresses to be mapped and returned to drivers which
   are not reachable by IOMMU hardware yet, causing IO page-faults. This
   is fixed too by adding the necessary flushes before a new page-table
   root is published.

   Related to the race condition fixes these patches also add a missing
   domain_flush_complete() barrier to update_domain() and a fix to bail
   out of the loop which tries to increase the address space when the
   call to increase_address_space() fails.

   Qian was able to trigger the race conditions under high load and
   memory pressure within a few days of testing. He confirmed that he
   has seen no issues anymore with the fixes included here.

 - Fix for a list-handling bug in the VirtIO IOMMU driver.

* tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/virtio: Reverse arguments to list_add
  iommu/amd: Do not flush Device Table in iommu_map_page()
  iommu/amd: Update Device Table in increase_address_space()
  iommu/amd: Call domain_flush_complete() in update_domain()
  iommu/amd: Do not loop forever when trying to increase address space
  iommu/amd: Fix race in increase_address_space()/fetch_pte()

Pull block fixes from Jens Axboe:

 - a small series fixing a use-after-free of bdi name (Christoph,Yufen)

 - NVMe fix for a regression with the smaller CQ update (Alexey)

 - NVMe fix for a hang at namespace scanning error recovery (Sagi)

 - fix race with blk-iocost iocg->abs_vdebt updates (Tejun)

* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
  nvme: fix possible hang when ns scanning fails during error recovery
  nvme-pci: fix "slimmer CQ head update"
  bdi: add a ->dev_name field to struct backing_dev_info
  bdi: use bdi_dev_name() to get device name
  bdi: move bdi_dev_name out of line
  vboxsf: don't use the source name in the bdi name
  iocost: protect iocg->abs_vdebt with iocg->waitq.lock

It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before.  Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.

The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:

   Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()

So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes from Palmer Dabbelt:
 "A smattering of fixes and cleanups:

   - Dead code removal.

   - Exporting riscv_cpuid_to_hartid_mask for modules.

   - Per-CPU tracking of ISA features.

   - Setting max_pfn correctly when probing memory.

   - Adding a note to the VDSO so glibc can check the kernel's version
     without a uname().

   - A fix to force the bootloader to initialize the boot spin tables,
     which still get used as a fallback when SBI-0.1 is enabled"

* tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Remove unused code from STRICT_KERNEL_RWX
  riscv: force __cpu_up_ variables to put in data section
  riscv: add Linux note to vdso
  riscv: set max_pfn to the PFN of the last page
  RISC-V: Remove N-extension related defines
  RISC-V: Add bitmap reprensenting ISA features common across CPUs
  RISC-V: Export riscv_cpuid_to_hartid_mask() API

gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.

This results in warnings like:

   crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]

because the crypto layer had its local freeing functions called
'free()'.

Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.

But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.

[ Side note: gcc knowing about 'free()' is in itself not the
  mis-feature: the semantics of 'free()' are special enough that a
  compiler can validly do special things when seeing it.

  So the mis-feature here is that gcc thinks that 'free()' is some
  restricted name, and you can't shadow it as a local static function.

  Making the special 'free()' semantics be a function attribute rather
  than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.

That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful.  But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.

And people do that as an odd concatenation pattern, with code like this:

    #define sysfs_show_gen_prop(buffer, fmt, ...) \
        snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)

where we have 'buffer' as both the destination of the final result, and
as the initial argument.

Yes, it's a bit questionable.  And outside of the kernel, people do have
standard declarations like

    int snprintf( char *restrict buffer, size_t bufsz,
                  const char *restrict format, ... );

where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.

But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.

If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends.  But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the final array bounds warning removal for gcc-10 for now.

Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the controller is reconnecting, the host fails I/O and admin
commands as the host cannot reach the controller. ns scanning may
revalidate namespaces during that period and it is wrong to remove
namespaces due to these failures as we may hang (see 205da243).

One command that may fail is nvme_identify_ns_descs. Since we return
success due to having ns identify descriptor list optional, we continue
to compare ns identifiers in nvme_revalidate_disk, obviously fail and
return -ENODEV to nvme_validate_ns, which will remove the namespace.

Exactly what we don't want to happen.

Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional")
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pre-incrementing ->cq_head can't be done in memory because OOB value
can be observed by another context.

This devalues space savings compared to original code :-\

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
	add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32)
	Function                                     old     new   delta
	nvme_poll_irqdisable                         464     456      -8
	nvme_poll                                    455     447      -8
	nvme_irq                                     388     380      -8
	nvme_dev_disable                             955     947      -8

But the code is minimal now: one read for head, one read for q_depth,
one increment, one comparison, single instruction phase bit update and
one write for new head.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Fixes: e2a366a4 ("nvme-pci: slimmer CQ head update")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Cache a copy of the name for the life time of the backing_dev_info
structure so that we can reference it even after unregistering.

Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears")
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the common interface bdi_dev_name() to get device name.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Add missing <linux/backing-dev.h> include BFQ
Signed-off-by: Jens Axboe <axboe@kernel.dk>