INV cmd for dcache provides 2 modes discard or wback-before-discard.
One is default and other needs to be set, if so desired. This is common
for line-op/entire-cache-op. So refactor them out into a helper

Doesn't affect generated code but paves way for any common
micro-optimization.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

* print aliasing or not, VIPT/PIPT etc
* compress param storage using bitfields
* more use of IS_ENABLED to de-uglify code
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

With all IRQs unmasked by default on all cores, it is no longer needed
to unmask them explicitly.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Hardware keeps them enabled on reset, and Linux needs to keep status quo.
Any spurious interrupts will be reported/blocked by genirq.

This helps remove a SMP IRQ quirk (next commit), where a peripheral IRQ
is hard wired to core0, and request_irq()->unmask() happens on core1,
keeping the IRQ masked on core0, needing an explicit unmask.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

The current cpu-private IRQ registration is ugly as it requires need to
expose arch_unmask_irq() outside of intc code.
So switch to percpu IRQ APIs:
  -request_percpu_irq [boot core]
  -enable_percpu_irq  [all cores]

Encapsulated in helper arc_request_percpu_irq()
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ARM fixes from Russell King:
 "Another round of ARM fixes.  The largest change here is the L2 changes
  to work around problems for the Armada 37x/380 devices, where most of
  the size comes down to comments rather than code.

  The other significant fix here is for the ptrace code, to ensure that
  rewritten syscalls work as intended.  This was pointed out by Kees
  Cook, but Will Deacon reworked the patch to be more elegant.

  The remainder are fairly trivial changes"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8087/1: ptrace: reload syscall number after secure_computing() check
  ARM: 8086/1: Set memblock limit for nommu
  ARM: 8085/1: sa1100: collie: add top boot mtd partition
  ARM: 8084/1: sa1100: collie: revert back to cfi_probe
  ARM: 8080/1: mcpm.h: remove unused variable declaration
  ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache

Note that I don't maintain Documentation/ABI/,
Documentation/devicetree/, or the language translation files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These days most people use git to send patches so I have added a section
about that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On the syscall tracing path, we call out to secure_computing() to allow
seccomp to check the syscall number being attempted. As part of this, a
SIGTRAP may be sent to the tracer and the syscall could be re-written by
a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall
is ignored by the current code unless TIF_SYSCALL_TRACE is also set on
the current thread.

This patch slightly reworks the enter path of the syscall tracing code
so that we always reload the syscall number from
current_thread_info()->syscall after the potential ptrace traps.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 1c2f87c2 (ARM: 8025/1: Get rid of meminfo) changed find_limits
to use memblock_get_current_limit for calculating the max_low pfn.
nommu targets never actually set a limit on memblock though which
means memblock_get_current_limit will just return the default
value. Set the memblock_limit to be the end of DDR to make sure
bounds are calculated correctly.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The CFI mapping is now perfect so we can expose the top block, read only.
There isn't much to read, though, just the sharpsl_params values.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Reverts commit d26b17ed
ARM: sa1100: collie.c: fall back to jedec_probe flash detection

Unfortunately the detection was challenged on the defective unit used for tests:
one of the NOR chips did not respond to the CFI query.
Moreover that bad device needed extra delays on erase-suspend/resume cycles.

Tested personally on 3 different units and with feedback of two other users.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The sync_phys variable has been replaced by link time computation in
mcpm_head.S before the code was submitted upstream.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When a PL310 cache is used on a system that provides hardware
coherency, the outer cache sync operation is useless, and can be
skipped. Moreover, on some systems, it is harmful as it causes
deadlocks between the Marvell coherency mechanism, the Marvell PCIe
controller and the Cortex-A9.

To avoid this, this commit introduces a new Device Tree property
'arm,io-coherent' for the L2 cache controller node, valid only for the
PL310 cache. It identifies the usage of the PL310 cache in an I/O
coherent configuration. Internally, it makes the driver disable the
outer cache sync operation.

Note that technically speaking, a fully coherent system wouldn't
require any of the other .outer_cache operations. However, in
practice, when booting secondary CPUs, these are not yet coherent, and
therefore a set of cache maintenance operations are necessary at this
point. This explains why we keep the other .outer_cache operations and
only ->sync is disabled.

While in theory any write to a PL310 register could cause the
deadlock, in practice, disabling ->sync is sufficient to workaround
the deadlock, since the other cache maintenance operations are only
used in very specific situations.

Contrary to previous versions of this patch, this new version does not
simply NULL-ify the ->sync member, because the l2c_init_data
structures are now 'const' and therefore cannot be modified, which is
a good thing. Therefore, this patch introduces a separate
l2c_init_data instance, called of_l2c310_coherent_data.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull spi fixes from Mark Brown:
 "A few driver specific fixes, the biggest one being a fix for the newly
  added Qualcomm SPI controller driver to make it not use its internal
  chip select due to hardware bugs, replacing it with GPIOs"

* tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: qup: Remove chip select function
  spi: qup: Fix order of spi_register_master
  spi: sh-sci: fix use-after-free in sh_sci_spi_remove()
  spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI

Pull regulator fixes from Mark Brown:
 "Several driver specific fixes here, the palmas fixes being especially
  important for a range of boards - the recent updates to support new
  devices have introduced several regressions"

* tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65218: Correct the the config register for LDO1
  regulator: tps65218: Add the missing of_node assignment in probe
  regulator: palmas: fix typo in enable_reg calculation
  regulator: bcm590xx: fix vbus name
  regulator: palmas: Fix SMPS enable/disable/is_enabled

Pull SCSI target fixes from Nicholas Bellinger:
 "Mostly minor fixes this time around.  The highlights include:

   - iscsi-target CHAP authentication fixes to enforce explicit key
     values (Tejas Vaykole + rahul.rane)
   - fix a long-standing OOPs in target-core when a alua configfs
     attribute is accessed after port symlink has been removed.
     (Sebastian Herbszt)
   - fix a v3.10.y iscsi-target regression causing the login reject
     status class/detail to be ignored (Christoph Vu-Brugier)
   - fix a v3.10.y iscsi-target regression to avoid rejecting an
     existing ITT during Data-Out when data-direction is wrong (Santosh
     Kulkarni + Arshad Hussain)
   - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas
     Patocka)
   - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: fix iscsit_del_np deadlock on unload
  iovec: move memcpy_from/toiovecend to lib/iovec.c
  iscsi-target: Avoid rejecting incorrect ITT for Data-Out
  tcm_loop: Fix memory leak in tcm_loop_submission_work error path
  iscsi-target: Explicily clear login response PDU in exception path
  target: Fix left-over se_lun->lun_sep pointer OOPs
  iscsi-target; Enforce 1024 byte maximum for CHAP_C key value
  iscsi-target: Convert chap_server_compute_md5 to use kstrtoul

Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/palmas' and 'regulator/fix/tps65218' into regulator-linus

On uniprocessor preemptible kernel, target core deadlocks on unload. The
following events happen:
* iscsit_del_np is called
* it calls send_sig(SIGINT, np->np_thread, 1);
* the scheduler switches to the np_thread
* the np_thread is woken up, it sees that kthread_should_stop() returns
  false, so it doesn't terminate
* the np_thread clears signals with flush_signals(current); and goes back
  to sleep in iscsit_accept_np
* the scheduler switches back to iscsit_del_np
* iscsit_del_np calls kthread_stop(np->np_thread);
* the np_thread is waiting in iscsit_accept_np and it doesn't respond to
  kthread_stop

The deadlock could be resolved if the administrator sends SIGINT signal to
the np_thread with killall -INT iscsi_np

The reproducible deadlock was introduced in commit
db6077fd, but the thread-stopping code was
racy even before.

This patch fixes the problem. Using kthread_should_stop to stop the
np_thread is unreliable, so we test np_thread_state instead. If
np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pull IOMMU fixes from Joerg Roedel:

 - fix VT-d regression with handling multiple RMRR entries per device

 - fix a small race that was left in the mmu_notifier handling in the
   AMD IOMMUv2 driver

* tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix small race between invalidate_range_end/start
  iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device

Pull x86 fixes from Peter Anvin:
 "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling.

  It turns out that removing the section headers from the VDSO breaks
  gdb, so this puts back most of them.  A very simple typo broke
  rt_sigreturn on some versions of glibc, with obviously disastrous
  results.  The rest is pretty much fixes for the corresponding fallout.

  The EFI fixes fixes an arithmetic overflow on 32-bit systems and
  quiets some build warnings.

  Finally, when invoking an invalid system call number on x86-32, we
  bypass a bunch of handling, which can make the audit code oops"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-pstore: Fix an overflow on 32-bit builds
  x86/vdso: Error out in vdso2c if DT_RELA is present
  x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
  x86_32, signal: Fix vdso rt_sigreturn
  x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)
  x86/vdso: Create .build-id links for unstripped vdso files
  x86/vdso: Remove some redundant in-memory section headers
  x86/vdso: Improve the fake section headers
  x86/vdso2c: Use better macros for ELF bitness
  x86/vdso: Discard the __bug_table section
  efi: Fix compiler warnings (unused, const, type)

Pull MIPS fixes from Ralf Baechle:
 "This is dominated by a large number of changes necessary for the MIPS
  BPF code.  code.  Aside of that there are

   - a fix for the MSC system controller support code.
   - a Turbochannel fix.
   - a recordmcount fix that's MIPS-specific.
   - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere
     in the kernel.
   - revert support for MSA registers in the signal frames.  The
     reverted patch did modify the signal stack frame which of course is
     inacceptable.
   - fix math-emu build breakage with older compilers.
   - some related cleanup.
   - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits)
  MIPS: Lasat: Fix build error if CRC32 is not enabled.
  TC: Handle device_register() errors.
  MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region
  MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64
  MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register
  MIPS: bpf: Fix PKT_TYPE case for big-endian cores
  MIPS: BPF: Prevent kernel fall over for >=32bit shifts
  MIPS: bpf: Drop update_on_xread and always initialize the X register
  MIPS: bpf: Fix is_range() semantics
  MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes
  MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case
  MIPS: bpf: Use correct mask for VLAN_TAG case
  MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases
  MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE
  MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases
  MIPS: bpf: Return error code if the offset is a negative number
  MIPS: bpf: Use the LO register to get division's quotient
  MIPS: mm: uasm: Fix lh micro-assembler instruction
  MIPS: uasm: Add SLT uasm instruction
  MIPS: uasm: Add s3s1s2 instruction builder
  ...

Pull ARC fixes from Vineet Gupta:
 "Some SMP changes, a ptrace request for NPTL debugging, bunch of build
  breakages/warnings"

* tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [SMP] Enable icache coherency
  ARC: [SMP] Fix IPI IRQ registration
  ARC: Implement ptrace(PTRACE_GET_THREAD_AREA)
  ARC: optimize kernel bss clearing in early boot code
  ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND
  ARC: fix build warning in devtree
  ARC: remove checks for CONFIG_ARC_MMU_V4

Pull compress bugfix from Greg KH:
 "Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue
  with that compression algorithm"

* tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lz4: fix another possible overrun

Merge tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb bugfix from Konrad Rzeszutek Wilk:
 "One bug-fix that had been in tree for quite some time.  We had assumed
  that the physical address zero was invalid and would fail it.  But
  that is not true and on some architectures it is not reserved and
  valid.  This fixes it"

* tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: don't assume PA 0 is invalid

Pull sound fixes from Takashi Iwai:
 "Here includes a few patchset for fixing mostly HD-audio issues in
  addition to a patch assuring the compress API bytes alignment and a
  fix for the die-hard existing race condition at USB-audio
  disconnection.  The volume looks big in Realtek HD-audio code, but
  it's just a translation of the fixup tables, and the actual changes
  are rather trivial"

* tag 'sound-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - restore BCLK M/N values when resuming HSW/BDW display controller
  ALSA: usb-audio: Fix races at disconnection and PCM closing
  ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13
  ALSA: hda - Make the pin quirk tables use the SND_HDA_PIN_QUIRK macro
  ALSA: hda - Make a SND_HDA_PIN_QUIRK macro
  ALSA: hda - Add pin quirk for Dell XPS 15
  ALSA: hda - hdmi: call overridden init on resume
  ALSA: hda - Fix usage of "model" module parameter
  ALSA: compress: fix the struct alignment to 4 bytes

Pull MFD fixes from Lee Jones:
 "Couple of simple fixes due for the v3.16 -rcs"

* tag 'mfd-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: ab8500: Fix dt irq mapping
  mfd: davinci: Voicecodec needs regmap_mmio
  mfd: STw481x: Allow modular build
  mfd: UCB1x00: Enable modular build

Pull drm fixes from Dave Airlie:
 "Exynos, i915 and msm fixes and one core fix.

  exynos:
     hdmi power off and mixer issues

  msm:
     iommu, build fixes,

  i915:
     regression races and warning fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  drm/i915: vlv_prepare_pll is only needed in case of non DSI interfaces
  drm: fix NULL pointer access by wrong ioctl
  drm/exynos: enable vsync interrupt while waiting for vblank
  drm/exynos: soft reset mixer before reconfigure after power-on
  drm/exynos: allow multiple layer updates per vsync for mixer
  drm/i915: Hold the table lock whilst walking the file's idr and counting the objects in debugfs
  drm/i915: BDW: Adding Reserved PCI IDs.
  drm/i915: Only mark the ctx as initialised after a SET_CONTEXT operation
  drm/exynos: stop mixer before gating clocks during poweroff
  drm/exynos: set power state variable after enabling clocks and power
  drm/exynos: disable unused windows on apply
  drm/exynos: Fix de-registration ordering
  drm/exynos: change zero to NULL for sparse
  drm/exynos: dpi: Fix NULL pointer dereference with legacy bindings
  drm/exynos: hdmi: fix power order issue
  drm/i915: default to having backlight if VBT not available
  drm/i915: cache hw power well enabled state
  drm/msm: fix IOMMU cleanup for -EPROBE_DEFER
  drm/msm: use PAGE_ALIGNED instead of IS_ALIGNED(PAGE_SIZE)
  drm/msm/hdmi: set hdp clock rate before prepare_enable
  ...

ERROR: "memcpy_fromiovecend" [drivers/vhost/vhost_scsi.ko] undefined!

commit 9f977ef7
    vhost-scsi: Include prot_bytes into expected data transfer length
in target-pending makes drivers/vhost/scsi.c call memcpy_fromiovecend().
This function is not available when CONFIG_NET is not enabled.

socket.h already includes uio.h, so no callers need updating.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch changes iscsit_check_dataout_hdr() to dump the incoming
Data-Out payload when the received ITT is not associated with a
WRITE, instead of calling iscsit_reject_cmd() for the non WRITE
ITT descriptor.

This addresses a bug where an initiator sending an Data-Out for
an ITT associated with a READ would end up generating a reject
for the READ, eventually resulting in list corruption.
Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

There is one other possible overrun in the lz4 code as implemented by
Linux at this point in time (which differs from the upstream lz4
codebase, but will get synced at in a future kernel release.)  As
pointed out by Don, we also need to check the overflow in the data
itself.

While we are at it, replace the odd error return value with just a
"simple" -1 value as the return value is never used for anything other
than a basic "did this work or not" check.
Reported-by: "Don A. Bailey" <donb@securitymouse.com>
Reported-by: Willy Tarreau <w@1wt.eu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 * Fix a few compiler warnings (one being a real bug) in the arm64 EFI
   code that lots of people are running into and reporting - Catalin Marinas

 * Use a cast to avoid a 32-bit overflow issue when generating pstore
   filenames - Andrzej Zaborowski
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

In generic_id the long int timestamp is multiplied by 100000 and needs
an explicit cast to u64.

Without that the id in the resulting pstore filename is wrong and
userspace may have problems parsing it, but more importantly files in
pstore can never be deleted and may fill the EFI flash (brick device?).
This happens because when generic pstore code wants to delete a file,
it passes the id to the EFI backend which reinterpretes it and a wrong
variable name is attempted to be deleted.  There's no error message but
after remounting pstore, deleted files would reappear.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Fixes for 3.16-rc2; regressions, races, and warns; Broadwell PCI IDs.

* tag 'drm-intel-fixes-2014-06-26' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: vlv_prepare_pll is only needed in case of non DSI interfaces
  drm/i915: Hold the table lock whilst walking the file's idr and counting the objects in debugfs
  drm/i915: BDW: Adding Reserved PCI IDs.
  drm/i915: Only mark the ctx as initialised after a SET_CONTEXT operation
  drm/i915: default to having backlight if VBT not available
  drm/i915: cache hw power well enabled state

This patch fixes a tcm_loop_cmd descriptor memory leak in the
tcm_loop_submission_work() error path, and would result in
warnings about leaked tcm_loop_cmd_cache objects at module
unload time.

Go ahead and invoke kmem_cache_free() to release tl_cmd back to
tcm_loop_cmd_cache before calling sc->scsi_done().
Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>