When doing lockdep, I had two patches to initialize paca->_current
early, one bogus, and one correct.  Unfortunately both got merged
as the bad one ended up being part of the main lockdep patch by
mistake.  This causes memory corruption at boot.  This removes
the offending code.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Remove #ifdef CONFIG_OF_I2C as this breaks module compilation.
Drivers using this header should depend on OF_I2C anyways, so
there's no need to make this conditional.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Changes the cputable so that various CPU families that have an exclusive
CONFIG_ option have a more sensible default entry to use if the specific
processor hasn't been identified.

This makes the kernel more generally useful when booted on an unknown
PVR for things like new 4xx variants.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge

We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep
lockdep happy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

We should not requeue the victim context in find_victim if the owner is
not in spu_run. It's first not needed because leaving the context on
the spu is an optimization and second is harmful because it means the
owner could re-enter spu_run when the context is on the runqueue and
trip the BUG_ON in __spu_update_sched_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

This patch is fixes the sequoia.dts device tree file to use the values defined
in the 440Epx data sheet from AMCC.

That fixes an issue where some devices, including graphics cards, would not
initialize properly because the PCI resource space was not big enough.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

This patch adds basic endpoint support to the 4xx PCIe driver.

This is done by checking the device_type property of the PCIe
device node ("pci" for root-complex and "pci-endpoint" for endpoint
configuration).

Note: Currently we map a fixed 64MByte window to PLB address 0 (SDRAM).
This should probably be configurable via a dts property.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

The new 440x6 core used on AMCC 460EX/GT introduces new storage attibure
fields to the TLB2 word. Those are:

Bit  11   12   13   14   15
     WL1  IL1I IL1D IL2I IL2D

With these bits the cache (L1 and L2) can be configured in a more flexible
way, instruction- and data-cache independently now. The "old" I and W bits
are still available and setting these old bits will automically set these
new bits too (for backward compatibilty).

The current code does not clear these fields resulting in disabling the cache
by chance. This patch now makes sure that these new bits are cleared when
the TLB2 word is written.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

Creating a spufs context or gand using spu_create should send an inotify
event so that things like performance monitors have an easy way to find
out about newly created contexts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

Simply replace proc_create and further data assigned with proc_create_data.
No need to check for data!=NULL after that.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

We provide an ioremap_flags, so this provides a corresponding
devm_ioremap_prot.  The slight name difference is at Ben
Herrenschmidt's request as he plans on changing ioremap_flags to
ioremap_prot in the future.
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Currently, page fault handlers don't issue a mfc restart if the context
switch pending flag is set, which can leave us with a hanging DMA after
a context restore.

This patch introduces fault pending flag that is set by the fault
handler and read by the context switch code, so that the latter can add
the restart bit at the right spot, after it has successfuly saved the
state of the mfc control register.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SPU class 0 & 1 exceptions may occur in parallel, so we may end up
overwriting csa.dsisr.

This change adds dedicated fields for each class to the spu and the spu
context so that fault data is not overwritten.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

Currently, we re-route SPU interrupts to the current cpu, which may be
on a remote node. In the case of time slicing, all spu interrupts will
end up routed to the same cpu, where the spusched_tick occurs.

This change routes mfc interrupts to the cpu where the controlling
thread last ran, provided that cpu is on the same node as the spu
(otherwise don't reroute interrupts).

This should improve performance and provide a more predictable
environment for processing spu exceptions. In the past we have seen
concurrent delivery of spu exceptions to two cpus. This eliminates that
concern.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

synchronize_irq() provides the serialization for
SPU_CONTEXT_SWITCH_PENDING which is read with a simple load. This
routine guarantees that the relevant interrupt handlers are not running,
so that the next time they do run they will see the update
memory value.

This must be done correctly so that exception handling code does not
restart the mfc in the middle of a context switch while we are trying
to atomically stop it and save state.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

There's currently no way to tell if spu_process_callback has
returned with the state mutex held, as -EINTR may be returned
by either the syscall or the spu_acquire fail case.

Instead, just do a non-interruptible mutex_lock here.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

Currently, we update the SPU master run control bit (ie,
spu_enable_spu) in spufs_run_spu before we grab the context mutex. This
can result in races with other processes accessing this context's
resources.

This change moves the spu_enable_spu to after we have acquired the
context lock.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

We currently have two issues with the MFC save code:

 * save_mfc_decr doesn't handle a transition of 1 -> 0 of the Ds bit
 * The Q bit may be stale in the CSA

This change fixes the first issue by clearing the relevant bits from
the MFC_CNTL value in the CSA before or-ing in the updated status.
Also, we add the Q bit to the updated status.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

Currently, we can introduce invalid entries into the MFC queues:

1) context starts a DMA

2) context gets scheduled out during a DMA
  - kernel saves MFC queue to CSA
  - kernel saves 0x0 in csa->mfc_control_RW

3) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set, so DMA queues are
    restored from the CSA

4) context's DMA is completed

5) context gets scheduled out again, no DMA occuring this time
  - kernel sees that MFC_CNTL[Q] ('queues empty') is set, so doesn't
    touch saved queue data in CSA
  - kernel saves 0x0 in csa->mfc_control_RW

6) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set (we saved is as 0!),
    so DMA queues are restored from the CSA

In this last restore, we've restored the queue status from step 2,
which are now invalid.

This change makes save_mfc_cntl() closer to the save/restore sequence,
as specified in the CBE handbook.

With changes from Luke Browning.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

When we issue a MFC purge request, we may inadvertantly clear the
suspended status.

This change adds the MFC_CNTL_SUSPEND_MASK when we issue a purge
request, so that the suspend bit is masked out.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

We may currently lose interrupts during SPE context switch, as we alter
the INT_Route register. Because the IIC uses a per-thread priority
status, changing the interrupt routing to a different thread means that
the IRQ is no longer masked by the priority status, so we end up with
two fasteoi IRQ handlers executing for the one irq_desc. The fasteoi
handler doesn't handle multiple IRQs, so drops the second one.

Fix this by using our own flow handler. This is based on
handle_edge_irq, but issues an eoi after IRQs are handled, and doesn't
do any mask/unmasking.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes:
  fix asm-mips/types.h syntax error
  fix asm-alpha/types.h breakage

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  x86: fix setup printk format warning
  x86: olpc build fix
  x86: video/fbdev.c: add MODULE_LICENSE
  x86: fix up bootparam.h for userspace inclusion
  x86: relocs ELF handling - use SELFMAG instead of numeric constant
  x86: vdso ELF handling - use SELFMAG instead of numeric constant
  x86: remove dell reboot dmi quirk board name match
  x86: es7000 build fix
  x86: make additional_cpus static
  x86: make start_secondary() static
  kbuild, suspend, x86: fix rebuild of wakeup.bin
  uml: fix gcc problem
  x86: undo visws/numaq build changes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kconfig-language.txt: remove bogus hint
  kconfig: fix MAC OS X warnings in menuconfig
  modpost: i2c aliases need no trailing wildcard

  CC      fs/proc/task_nommu.o
fs/proc/task_nommu.c: In function ‘task_mem’:
fs/proc/task_nommu.c:55: error: dereferencing pointer to incomplete type
make[2]: *** [fs/proc/task_nommu.o] Error 1
make[1]: *** [fs/proc] Error 2
make: *** [fs] Error 2
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: IDE_HFLAG_SERIALIZE_DMA bugfix

* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  x86: KVM geust: make setup_secondary_clock definition dependent on local apic
  KVM: MMU: Allow more than PAGES_PER_HPAGE write protections per large page
  KVM: avoid fx_init() schedule in atomic
  KVM: Avoid spurious execeptions after setting registers
  KVM: PIT: support mode 4
  KVM: x86 emulator: disable writeback on lmsw
  KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest
  KVM: ppc: Handle guest idle by emulating MSR[WE] writes
  KVM: x86: task switch: fix wrong bit setting for the busy flag
  KVM: VMX: Enable EPT feature for KVM
  KVM: VMX: Prepare an identity page table for EPT in real mode
  KVM: Export necessary function for EPT
  KVM: MMU: Remove #ifdef CONFIG_X86_64 to support 4 level EPT
  KVM: MMU: Add EPT support
  KVM: Add kvm_x86_ops get_tdp_level()
  KVM: MMU: Move some definitions to a header file
  KVM: VMX: EPT Feature Detection

x86.git testing found the following build failure on v2.6.26-rc1:

  In file included from include/linux/kobject.h:22,
                   from include/linux/module.h:17,
                   from include/linux/crypto.h:22,
                   from arch/x86/kernel/asm-offsets_32.c:8,
                   from arch/x86/kernel/asm-offsets.c:3:
  include/linux/sysfs.h:201: error: redefinition of 'sysfs_update_group'
  include/linux/sysfs.h:195: error: previous definition of 'sysfs_update_group' was here
  make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1
  make: *** [prepare0] Error 2

with the following config:

    http://redhat.com/~mingo/misc/config-Sun_May__4_07_09_30_CEST_2008.bad

the reason for the build failure is the duplicate definition of the
sysfs_update_group() inline function in include/linux/sysfs.h.

The duplication was a merge error: it was added via -mm by commit
v2.6.25-7262-g2850699c, "sysfs: sysfs_update_group stub for
CONFIG_SYSFS=n" a day before v2.6.26-rc1, but a day before that the same
commit was already merged upstream via the sysfs tree, with commit
v2.6.25-7211-g1cbfb7a5.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel module loader used to be much too happy to allow loading of
modules for the wrong kernel version by default.  For example, if you
had MODVERSIONS enabled, but tried to load a module with no version
info, it would happily load it and taint the kernel - whether it was
likely to actually work or not!

Generally, such forced module loading should be considered a really
really bad idea, so make it conditional on a new config option
(MODULE_FORCE_LOAD), and make it default to off.

If somebody really wants to force module loads, that's their problem,
but we should not encourage it.  Especially as it happened to me by
mistake (ie regular unversioned Fedora modules getting loaded) causing
lots of strange behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following compile error caused by
commit 23cf11dd
(mips: types: use <asm-generic/int-*.h> for the mips architecture):

<--  snip  -->

...
  CC      kernel/bounds.s
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/types.h:12,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/page-flags.h:8,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/bounds.c:9:
include2/asm/types.h:56:2: error: #endif without #if
make[2]: *** [kernel/bounds.s] Error 1

<--  snip  -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

This patch fixes the following compile error on alpha caused by
commit 3726c23d
(alpha: types: use <asm-generic/int-*.h> for the alpha architecture):

<--  snip  -->

...
  CC      arch/alpha/kernel/asm-offsets.s
In file included from include2/asm/topology.h:6,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/topology.h:34,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/mmzone.h:683,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/gfp.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/slab.h:12,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/percpu.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/rcupdate.h:39,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/pid.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/sched.h:74,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:9:
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:12:
include2/asm/io.h:94: warning: type defaults to 'int' in declaration of 'dma_addr_t'
include2/asm/io.h:94: warning: variable 'dma_addr_t' declared 'inline'
include2/asm/io.h:94: error: expected ',' or ';' before 'isa_page_to_bus'
make[2]: *** [arch/alpha/kernel/asm-offsets.s] Error 1

<--  snip  -->

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

For the use case the hint describe a simple dependency is
enough.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Timur Tabi <timur@freescale.com>

Fix x86 setup printk format warming:

next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

CONFIG_OLPC needs to depend on MGEODE_LX
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add the missing MODULE_LICENSE("GPL").
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>