- 20 Oct, 2004 40 commits
-
-
Adrian Bunk authored
Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
kernel/built-in.o(.text+0x1d42b): In function `crash_create_proc_entry': : undefined reference to `proc_vmcore' Signed-off-by:
-
Keith Owens authored
Treat .pci_fixup entries the same as .init code/data. Signed-off-by:
Keith Owens <kaos@ocs.com.au> Signed-off-by:
-
Dean Gaudet authored
This patch adds efficeon as a cpu option, and makes a small update to the transmeta cpuid code. (i wasn't sure if the various doc files are UTF-8... if they are, then the e should be a U-275 ;) The compile options may not be ideal, but they're probably close. i used -march=pentium3, but -march=pentium4 would have been good enough too. The cpuid update teaches transmeta.c about the extended processor revision present in cpuid level 0x80860002... the external documentation does not indicate how to break apart this field, and instructs only that the 32-bit value should be printed in hex (alas). Signed-off-by:
dean gaudet <dean@arctic.org> Signed-off-by:
-
Maciej W. Rozycki authored
I've noticed that under specific circumstances the "console=" kernel parameter is ignored. This happens when EARLY_PRINTK is enabled and the serial console is the only available. In this case unregister_console() when called for the early console sets preferred_console back to -1 replacing the value that was recorded by console_setup() -- the order of calls is as follows: 1. register_console() -- for the early console, 2. console_setup() -- recording the console index for the real console, 3. unregister_console() -- for the early console, erasing the console index recorded above, 4. register_console() -- for the real console, picking up the first device available, instead of the selected one. I've observed this problem with a DECstation system using ttyS3 -- its default console device from the firmware's point of view. The solution is to restore the setting of "console=" upon unregister_console(). This made a snapshot of 2.4.26 work for me. I wasn't able to test the changes with 2.6 because DECstation drivers don't support it yet, but the code responsible for console selection appears functionally the same. So I've concluded it needs the same change. Here's a patch. Signed-off-by:
-
Matthieu Castet authored
Signed-off-by:
-
Ed Schouten authored
At the moment, the NLM cookie length is fixed to 8 bytes, while 1024 is the theoretical maximum. FreeBSD uses 16 bytes, Mac OS X uses 20 bytes. Therefore we need to make the length dynamic (which I set to 32 bytes). This patch is based on an old patch for Linux 2.4.23-pre9, which I changed to patch properly (also added some stylish NIPQUAD fixes). From: Neil Brown <neilb@cse.unsw.edu.au> Further lockd tidyups. - NIPQUAD everywhere that is appropriate - use XDR_QUADLEN in more places as appropriate - discard QUADLEN which is a lockd-specific version of XDR_QUADLEN Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Neil Brown authored
While %Lu works with gcc, %llu is the correct usage. Signed-off-by:
-
Manfred Spraul authored
Attached is a patch that fixes the fragmentation that Badri noticed with kmem_cache_alloc_node. kmem_cache_alloc_node tries to allocate memory from a given node. The current implementation contains two bugs: - the node aware code was used even for !CONFIG_NUMA systems. Fix: inline function that redefines kmem_cache_alloc_node as kmem_cache_alloc for !CONFIG_NUMA. - the code always allocated a new slab for each new allocation. This caused severe fragmentation. Fix: walk the slabp lists and search for a matching page instead of allocating a new page. - the patch also adds a new statistics field for node-local allocs. They should be rare - the codepath is quite slow, especially compared to the normal kmem_cache_alloc. Signed-Off-By:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Marcelo Tosatti authored
There is a useless AND in swp_type() function. We just shifted right SWP_TYPE_SHIFT() bits the value from the swp_entry_t, and then we AND it with "(1 << 5) - 1" (which is a mask corresponding to the number of bits used by "type"). Signed-off-by:
-
Dinakar Guniguntala authored
/proc shows the wrong PID as parent in the following case Process A creates Threads 1 & 2 (using pthread_create) Thread 2 then forks and execs process B getppid() for Process B shows Process A (rightly) as parent, however /proc/B/status shows Thread 3 as PPid (incorrect). Signed-off-by:
Dinakar Guniguntala <dino@in.ibm.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
There's no reason to directly #include <asm/bitops.h> since it's available on all architectures and also included by #include <linux/bitops.h>. This patch changes #include <asm/bitops.h> to #include <linux/bitops.h>. Signed-off-by:
-
Dave Hansen authored
I don't know what this is trying to do. It might be some kind of artifact from when get_pgd_slow() was removed. The expanded expression with __pa() ends up looking something like this: (unsigned long)(u64)(u32)pmd-PAGE_OFFSET and that is just nutty because pmd is a pointer now, anyway. Attached patch removes the casts. Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Use, in the rb_entry definition, the container_of macro instead of reinventing the wheel; compared to using offset_of() as I did in the prev. version, it has type safety checking. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
-
Pavel Machek authored
Overwrite __init section so calls to __init functions from normal code are caught, reliably. (Plus a fix from Dave Hansen) Signed-off-by:
-
Andrew Morton authored
remove unneeded preempt_disable/enable. pte_offset_map/unmap already does that. Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Matt Domsch authored
Separate the module source and header checksum into a separate modinfo field srcversion. With CONFIG_MODULE_SRCVERSION_ALL=y, put srcversion into every module, not just those with MODULE_VERSION("something"). Patch by Rusty Russell, trivial merging and testing by Matt Domsch Signed-off-by:Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Matt Domsch authored
Below is a patch to suppress printing uninformative errors from ide-floppy.c in response to commands to floppy drives in which no media is present. Without this patch, commands sent to ide-floppy devices without media inserted cause error messages on the console (KERN_ERR level) such as: ide-floppy: ide: I/O error, pc = 0 key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1b key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 23 key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0 Dell's Virtual Floppy (system management presents to the local system an IDE floppy device, which is actually a floppy device in a remote system connected over an IP link) exhibits this also, when connecting to a remote floppy drive with no media present. Signed-off-by:
-
Colin Leroy authored
This one fixes another unitialized var warning (which is harmless, but whatever). Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
Hideo Aoki authored
In Documentation/filesystems/proc.txt, explanation of /proc/meminfo is described in section 1.3 (IDE devices in /proc/ide). I think that it should be described in section 1.2 (Kernel data). Signed-off-by:
Hideo Aoki <aoki@sdl.hitachi.co.jp> Signed-off-by:
-
Hideo Aoki authored
This patch adds "swap_token_timeout" parameter in /proc/sys/vm. The parameter means expired time of token. Unit of the value is HZ, and the default value is the same as current SWAP_TOKEN_TIMEOUT (i.e. HZ * 300). Signed-off-by:
-
Matt Domsch authored
Some controller BIOSes have problems with the legacy int13 fn02 READ SECTORS command. int13 fn42 EXTENDED READ is used in preference by most boot loaders today, so lets use that. If EXTENDED READ fails or isn't supported, fall back to READ SECTORS. This hopefully resolves the three reports of BIOSes which would either long-pause (30+ seconds) or hang completely on the legacy READ SECTORS command. This also adds CONFIG_EDD_SKIP_MBR to eliminate reading the MBR on each BIOS-presented disk, in case there are further problems in this area. Signed-off-by:
-
Ryan S. Arnold authored
This patch prevents execution of hvc_write() and hvc_hangup() after the tty layer has executed a final hvc_close() against a device. This patch provides a better method than was previously used. tty->driver_data is no longer invalidated so we'll no longer get oopses when the tty layer allows late hangup() and write() operations. - Removed silly tty->driver_data = NULL; from hvc_close which prevents possible oops in hvc_write() and hvc_hangup() due to improperly acting ldisc close ordering. - Added hp->count <= 0 check to hvc_write() and hvc_hangup() to prevent execution of these function after hvc_close() has been invoked by the tty layer. Same tty ldisc issues as above are the reason. - Added some comments to clarify the situation. - Awaiting a forth coming patch from Alan Cox which should clean up the close ordering and prevent the late hangup and write ops from happening. Signed-off-by:
Ryan S. Arnold <rsa@us.ibm.com> Signed-off-by:
-
Yoichi Yuasa authored
This patch had added missing definition and had fixed typo for VRC4173. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Ed Schouten authored
print a couple of ipv4 addresses as dotted quads, not as hex. Signed-off-by:
-
Olaf Hering authored
I'm not sure why these defines and typedefs exists, the driver compiles fine without it. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Duncan Sands authored
The error exit path in request_firmware frees the allocated struct firmware *firmware, which is good. What is not so good is that the value of firmware has already been copied out to the caller as *firmware_p. The risk is that the caller will pass this to release_firmware, a double free. This is exactly what will happen if the caller copied the example code if(request_firmware(&fw_entry, $FIRMWARE, device) == 0) copy_fw_to_device(fw_entry->data, fw_entry->size); release(fw_entry); from the firmware documentation. Signed-off-by: -
Geert Uytterhoeven authored
Amiga frame buffer: We used to have a local hack in fbmem.c to always call the fbdev setup() routines, even when an fbdev was explicitly disabled on the kernel command line (video=xxx:off). This allowed amifb to suspend the monitor, but program the sync generator of the video controller in Denise/Lisa to a 31 kHz/70 Hz mode, increasing the maximum audio playback frequency. Thanks to the recently introduced fb_get_options() routine, we can kill the local hack and just use the return value of fb_get_options(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
A few more NULL vs. 0 cleanups, as detected by sparse. Signed-off-by:
-
Geert Uytterhoeven authored
Kill remainings of the DMI Resolver support code that got removed somewhere between 2.0 and 2.2. Signed-off-by:
-
Geert Uytterhoeven authored
Amiga frame buffer: The new convention (introduced in 2.6.9-rc1) requires that the usable color depth for pseudocolor visuals is indicated by the lengths of the color bitfields. Update amifb for this convention, and add a special case for HAM (Hold-and-Modify) mode (colormap has 16 (HAM6) or 64 (HAM8) entries). Signed-off-by:
-
Geert Uytterhoeven authored
Recent versions of ld add an empty stack program header to the kernel image, which makes it incompatible with current m68k bootstrap loaders. Modify the linker script to make sure we see only the program headers that are really needed. (from Roman Zippel) Signed-off-by:
-
Geert Uytterhoeven authored
M68k PCI: Removes unnecessary min/max macros and change calls to use kernel.h macros instead. Signed-off-by:
Michael Veeck <michael.veeck@gmx.net> Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
-
Geert Uytterhoeven authored
Atari ACSI: Correct a small problem in the dependencies of ATARI_BIONET and ATARI_PAMSNET (e.g. ATARI_ACSI=m shouldn't allow ATARI_BIONET=y). Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
Geert Uytterhoeven authored
Fix off-by-one error in zone size calculation (from Didier Mequignon and Petr Stehlik) Signed-off-by:
-
Maximilian Attems authored
hch send in a patch to remove MOD_{DEC,INC}_USE_COUNT. Let's also remove useless references to it (comments, old ifdefs). Signed-off-by: -
Oleg Nesterov authored
{set,clear}_child_tid initialized in copy_process() right after return from copy_thread(). These vars are not used in cleanup path if copy_thread() fails. grep -r _child_tid arch/ shows only ia64/kernel/asm-offsets.c, so i blindly patched non i386 archs too. Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Venkatesh Pallipadi authored
phys_proc_id gets initialized only when (smp_num_siblings > 1). But gets printed even when (smp_num_siblings == 1). As a result we print incorrect physical processor id in /proc/cpuinfo, when HT is disabled. Signed-off-by:
: "Venkatesh Pallipadi" <venkatesh.pallipadi@intel.com> Signed-off-by:
-
Christoph Hellwig authored
<linux/irq.h> is internals for the generic irq handler implementation, which is used on most but not all platforms. Signed-off-by:
-
