1. 11 Nov, 2015 35 commits
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: maltaup_xpa_defconfig: Convert to use libata PATA drivers · 1b7d8012
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts maltaup_xpa_defconfig to use libata PATA
      drivers (tc86c001 IDE host driver has no corresponding libata
      driver yet so it is not converted).
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11140/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      1b7d8012
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: maltaup_defconfig: Convert to use libata PATA drivers · 93c7e664
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts maltaup_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11142/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      93c7e664
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: maltasmvp_eva_defconfig: Convert to use libata PATA drivers · b0b98ad9
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts maltasmvp_eva_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11139/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      b0b98ad9
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: maltaaprp_defconfig: Convert to use libata PATA drivers · 255faa84
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts maltaaprp_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: b.zolnierkie@samsung.com
      Patchwork: https://patchwork.linux-mips.org/patch/11137/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      255faa84
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: malta_qemu_32r6_defconfig: Convert to use libata PATA drivers · 077b649a
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts malta_qemu_32r6_defconfig to use libata
      PATA drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: b.zolnierkie@samsung.com
      Patchwork: https://patchwork.linux-mips.org/patch/11138/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      077b649a
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: malta_kvm_guest_defconfig: Convert to use libata PATA drivers · 5f6df05b
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts malta_kvm_guest_defconfig to use libata
      PATA drivers (tc86c001 IDE host driver has no corresponding
      libata driver yet so it is not converted).
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Sanjay Lal <sanjayl@kymasys.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11136/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5f6df05b
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: malta_kvm_defconfig: Convert to use libata PATA drivers · 91c6fbab
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts malta_kvm_defconfig to use libata PATA
      drivers (tc86c001 IDE host driver has no corresponding libata
      driver yet so it is not converted).
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Sanjay Lal <sanjayl@kymasys.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11135/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      91c6fbab
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: malta_defconfig: Convert to use libata PATA drivers · d17e4655
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts malta_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11134/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      d17e4655
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: lemote2f_defconfig: Convert to use libata PATA drivers · 7ff7a5b1
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts lemote2f_defconfig to use libata PATA
      drivers.
      
      PS This platform uses CS5536 chipset which (due to historical
      reasons) has basic support in AMD/nVidia PATA host driver and
      full support in a newer CS5536 PATA one (pata_cs5536).  Thus
      most likely this platform should switch to using the latter
      host driver.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Huacai Chen <chenhc@lemote.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11133/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      7ff7a5b1
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: lasat_defconfig: Convert to use libata PATA drivers · 973852fc
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts lasat_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Brian Murphy <brian@murphy.dk>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11132/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      973852fc
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: fuloong2e_defconfig: Convert to use libata PATA drivers · 1485ddcc
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts fuloong2e_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wu Zhangjin <wuzhangjin@gmail.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11131/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      1485ddcc
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: e55_defconfig: Convert to use libata PATA drivers · 5c2a53a1
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts e55_defconfig to use libata PATA drivers.
      
      PS This platform still uses "ide0=base[,ctl[,irq]]" hack in
      its defconfig.  The hack itself has been removed in 2008 and
      this platform should be converted to using PATA platform host
      driver (pata_platform) instead.
      
      Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5c2a53a1
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: capcella_defconfig: Convert to use libata PATA drivers · 5081f4fc
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts capcella_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11129/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5081f4fc
    • Bartlomiej Zolnierkiewicz's avatar
      MIPS: bigsur_defconfig: Convert to use libata PATA drivers · adcdd428
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts bigsur_defconfig to use libata PATA
      drivers (tc86c001 IDE host driver has no corresponding libata
      driver yet so it is not converted).
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-ide@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11128/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      adcdd428
    • Paul Burton's avatar
      MIPS: Extend hardware table walking support to MIPS64 · cab25bc7
      Paul Burton authored
      Extend the existing support for Hardware Table Walking (HTW) to MIPS64
      systems by supporting PMDs & setting the pointer size bit in PWSize,
      then ceasing to blacklist HTW on MIPS64 systems.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Joshua Kinard <kumba@gentoo.org>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: Maciej W. Rozycki <macro@linux-mips.org>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11224/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      cab25bc7
    • Paul Burton's avatar
      MIPS: Malta: Register UP SMP ops if all else fails · ecafe3e9
      Paul Burton authored
      If we fail to register any real SMP implementations, fall back to
      registering the dummy UP implementation. Otherwise when we build an SMP
      kernel & run it on a system where the SMP implementations fail to probe
      (eg. QEMU) the kernel will perform a NULL dereference attempting to call
      mp_ops->smp_setup() from plat_smp_setup().
      
      Notably this fixes booting kernels with CPS SMP enabled on QEMU, which
      doesn't currently implement the CM, CPC or GIC.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Peter Hurley <peter@hurleysoftware.com>
      Cc: Rob Herring <robh@kernel.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11223/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      ecafe3e9
    • Paul Burton's avatar
      MIPS: Malta: Setup RAM regions via DT · e81a8c7d
      Paul Burton authored
      Move memory configuration to be performed via device tree for the Malta
      board. This moves more Malta specific code to malta-dtshim.c, leaving
      the rest of the mti-malta code a little more board-agnostic. This will
      be useful to share more code between boards, with the device tree
      providing the board specifics as intended.
      
      Since we can't rely upon Malta boards running a bootloader capable of
      handling devictrees & filling in the required information, a piece of
      shim code (malta_dt_shim) is added to consume the (e)memsize variables
      provided as part of the bootloader environment (or on the kernel command
      line) then generate the DT memory node using the provided values.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: devicetree@vger.kernel.org
      Cc: Kumar Gala <galak@codeaurora.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
      Cc: Rob Herring <robh+dt@kernel.org>
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Pawel Moll <pawel.moll@arm.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11222/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      e81a8c7d
    • Paul Burton's avatar
      MIPS: Malta: Remove fw_memblock_t abstraction · ea050714
      Paul Burton authored
      The fw_getmdesc function & fw_memblock_t abstraction is only used by
      Malta, and so far as I can tell serves no purpose beyond making the code
      less clear than it could be. Remove the useless level of abstraction.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11221/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      ea050714
    • Paul Burton's avatar
      MIPS: Malta: Split obj-y entries across lines · e1137e1d
      Paul Burton authored
      Split the obj-y entries to their own lines such that it's easier to see
      what's going on when adding or removing entries.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11220/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      e1137e1d
    • Paul Burton's avatar
      MIPS: Allow RIXI for 32-bit kernels on MIPS64 · 033549c6
      Paul Burton authored
      Commit a68d09a1 ("MIPS: Don't use RI/XI with 32-bit kernels on
      64-bit CPUs") prevented use of RIXI on MIPS64 systems, stating that the
      "TLB handlers cannot handle this case". What they actually couldn't
      handle was cases where there were less fill bits in the Entry{Lo,Hi}
      registers than bits used by software in PTEs. The handlers can now deal
      with this case, so enable RIXI for MIPS32 kernels on MIPS64 systems.
      
      Note that beyond the obvious benefits provided by having RIXI on such
      systems, this is required for systems implementing MIPSr6 where RIXI
      cannot be disabled.
      
      This reverts commit a68d09a1 ("MIPS: Don't use RI/XI with 32-bit
      kernels on 64-bit CPUs").
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Joshua Kinard <kumba@gentoo.org>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: Maciej W. Rozycki <macro@linux-mips.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11219/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      033549c6
    • Paul Burton's avatar
      MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields · 00bf1c69
      Paul Burton authored
      Commit 748e787e ("MIPS: Optimize TLB refill for RI/XI
      configurations.") stopped explicitly clearing the bits used by software
      in PTEs by making use of a rotate instruction that rotates them into the
      fill bits of the Entry{Lo,Hi} register. This can only work if there are
      actually enough fill bits in the register to cover the software
      maintained bits, otherwise we end up writing those bits into the upper
      bits of the PFN or PFNX field of the Entry{Lo,Hi} register.
      
      Fix this by detecting the number of fill bits present in the
      Entry{Lo,Hi} registers & explicitly clearing the software bits where
      necessary.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11218/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      00bf1c69
    • Paul Burton's avatar
      MIPS: Tidy EntryLo bit definitions, add PFN · c6956728
      Paul Burton authored
      Tidy up the definition of the EntryLo RI & XI bits using BITS_PER_LONG
      rather than #ifdef'ing on CONFIG_64BIT, and add a definition for the
      offset to the PFN field for use by a later patch.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Maciej W. Rozycki <macro@linux-mips.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11217/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      c6956728
    • Paul Burton's avatar
      MIPS: tlbex: Share MIPS32 32 bit phys & MIPS64 64 bit phys code · c676589b
      Paul Burton authored
      The code in build_update_entries for 64 bit physical addresses on a
      MIPS64 CPU and 32 bit physical addresses on a MIPS32 CPU is now
      identical, with the exception of r4k bug workaround in the latter which
      would simply not apply to the former. Remove the duplication and some
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11216/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      c676589b
    • Paul Burton's avatar
      MIPS: tlbex: Remove some RIXI redundancy · 974a0b6a
      Paul Burton authored
      The cpu_has_rixi cases in build_update_entries are now identical to the
      non-RIXI cases with the one exception of the r45k_bvahwbug case which is
      hardcoded as never happening anyway & presumably was either missed from
      the RIXI path or would never happen on a CPU with RIXI support. Remove
      the redundant checks & duplication.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11215/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      974a0b6a
    • Paul Burton's avatar
      MIPS: tlbex: Stop open-coding build_convert_pte_to_entrylo · dbfd657a
      Paul Burton authored
      Make use of build_convert_pte_to_entrylo in the RIXI cases within
      build_update_entries rather than open-coding it 4 times.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11214/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      dbfd657a
    • Paul Burton's avatar
      MIPS: Always use r4k_wait_irqoff for MIPSr6 · 5b10a0e8
      Paul Burton authored
      Prior to release 6 of the MIPS architecture it has been implementation
      dependent whether masked interrupts cause a wait instruction to return,
      so the kernel has effectively had to maintain a whitelist of cores upon
      which it is safe to use the r4k_wait_irqoff cpu_wait implementation.
      With MIPSr6 this is no longer implementation dependent and
      r4k_wait_irqoff can always be used.
      
      Remove the existing I6400 case which will no longer ever be hit, and was
      incorrect anyway since I6400 & r6 in general doesn't have the WII bit.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11210/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      5b10a0e8
    • Paul Burton's avatar
      MIPS: CM, CPC: Ensure core-other GCRs reflect the correct core · 78a54c4d
      Paul Burton authored
      Ensure the update to which core the core-other GCR regions reflect has
      taken place before any core-other GCRs are accessed by placing a memory
      barrier (sync instruction) between the write to the core-other registers
      and any such GCR accesses.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11209/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      78a54c4d
    • Paul Burton's avatar
      MIPS: CM: make use of mips_cm_{lock,unlock}_other · 4ede3161
      Paul Burton authored
      Document that CPC core-other accesses must take place within the bounds
      of the CM lock, and begin using the CM lock functions where we access
      the GCRs of other cores. This is required because with CM3 the CPC began
      using GCR_CL_OTHER instead of CPC_CL_OTHER.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: linux-kernel@vger.kernel.org
      Cc: Niklas Cassel <niklas.cassel@axis.com>
      Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11208/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      4ede3161
    • Paul Burton's avatar
      MIPS: CM: Introduce core-other locking functions · 23d5de8e
      Paul Burton authored
      Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the
      existing CPC equivalents, in order to lock access from the current core
      to another via the core-other GCR region. This hasn't been required in
      the past but with CM3 the CPC starts using GCR_CL_OTHER rather than
      CPC_CL_OTHER and this will be required for safety.
      
      [ralf@linux-mips.org: Fix merge conflict.]
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11207/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      23d5de8e
    • Paul Burton's avatar
      MIPS: CM: Fix GCR_Cx_CONFIG PVPE mask · 252d6aa6
      Paul Burton authored
      The PVPE (or PVP in >= CM3) field is 10 bits wide, but the mask
      previously only covered the bottom 9 bits. Extend the mask to cover all
      10 bits of the field.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11206/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      252d6aa6
    • Paul Burton's avatar
      MIPS: CPS: Warn if a core doesn't start · a8c20614
      Paul Burton authored
      When debugging core bringup it is useful to see the state of the CPC
      sequencer, so output that value if the core hasn't started within a
      reasonable amount of time (1 second). This avoids simply appearing to
      the user to hang if a secondary core fails to start.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: Niklas Cassel <niklas.cassel@axis.com>
      Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11205/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      a8c20614
    • Paul Burton's avatar
      MIPS: CPS: Skip Config1 presence check · 192fbc20
      Paul Burton authored
      The Config1 register is architecturally defined as required, and is thus
      present in all systems which may make use of cps-vec.S. Skip the check
      for its presence via the Config.M bit.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Cc: linux-kernel@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11204/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      192fbc20
    • Paul Burton's avatar
      MIPS: CPS: Read CM GCR base from cop0 · 946db173
      Paul Burton authored
      Rather than patching the start of mips_cps_core_entry to provide the
      base address of the CM GCRs, simply read that base address from the cop0
      CMGCRBase register, converting from the physical address to an uncached
      virtual address.
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: linux-kernel@vger.kernel.org
      Cc: Niklas Cassel <niklas.cassel@axis.com>
      Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11203/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      946db173
    • Paul Burton's avatar
      MIPS: CPS: Early debug using an ns16550-compatible UART · 609cf6f2
      Paul Burton authored
      Provide support for outputting early debug information, in the form of
      various register values should an exception occur, during the early
      bringup of secondary cores. This code requires an ns16550-compatible
      UART accessible from the secondary core, and is written in assembly due
      to the environment in which such early exceptions occur where way may
      not have a stack, be coherent or even have initialised caches.
      
      [ralf@linux-mips.org: Fix merge conflict.]
      Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Cc: Steven J. Hill <Steven.Hill@imgtec.com>
      Cc: Andrew Bresticker <abrestic@chromium.org>
      Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
      Cc: Maciej W. Rozycki <macro@linux-mips.org>
      Cc: Jason Cooper <jason@lakedaemon.net>
      Cc: linux-kernel@vger.kernel.org
      Cc: James Hogan <james.hogan@imgtec.com>
      Cc: Markos Chandras <markos.chandras@imgtec.com>
      Patchwork: https://patchwork.linux-mips.org/patch/11202/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      609cf6f2
    • James Hogan's avatar
      MIPS: Fix duplicate CP0_* definitions. · 195cee92
      James Hogan authored
      Remove the definition in locore.S and move a few of the other similar
      definitions in asm/mipsregs.h too. CP0_INTCTL, CP0_SRSCTL, & CP0_SRSMAP
      are unused so they're just dropped instead. CP0_DDATA_LO is left where
      it is as I have patches to eliminate its use in locore.S and it
      otherwise is unlikely to need to be used from assembly code.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Patchwork: https://patchwork.linux-mips.org/patch/11461/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      195cee92
  2. 26 Oct, 2015 5 commits