- 09 Jan, 2018 17 commits
-
-
Emil Tantilov authored
Removed leftover assignment of xcast_mode. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tonghao Zhang authored
The InterruptThrottleRate has been removed from ixgbe. Then Update the comment. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by:
-
Paul Greenwalt authored
Extend FW version reporting by displaying information from the iSCSI or OEM block in the EEPROM. This will allow us to more accurately identify the FW. Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
-
Paul Greenwalt authored
On module insert advertise highest capable link speed. If module is capable of 10G, then advertise 10G, else advertise modules capable link speeds. Signed-off-by:
-
Emil Tantilov authored
This enum is no longer needed after commit: b4ded832 ("ixgbe: Update adaptive ITR algorithm") Signed-off-by:
-
Emil Tantilov authored
Previously we only enabled the reception of multicast packets when wake on multicast is set, but we also need this to allow waking with IPv6 magic packets. Signed-off-by:
-
Yang Shi authored
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by TIPC at all. So, remove the unused hardirq.h. Signed-off-by:
Yang Shi <yang.s@alibaba-inc.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
Yang Shi authored
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by openvswitch at all. So, remove the unused hardirq.h. Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: dev@openvswitch.org Signed-off-by:
-
Yang Shi authored
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by caif at all. So, remove the unused hardirq.h. Signed-off-by:
-
David S. Miller authored
Gal Pressman says: ==================== Replace WARN_ONCE usages with netdev_WARN_ONCE This series will fix an issue in netdev_WARN_ONCE, improve its formatting and replace drivers' usage of WARN_ONCE to netdev_WARN_ONCE. Driver specific patches were compilation tested, in addition, functional tested on Mellanox NIC. v1->v2: - Addressed commit message comments in patch #1 ==================== Signed-off-by: -
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by:
Gal Pressman <galp@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by:
-
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by:
-
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by:
-
Gal Pressman authored
Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro. Signed-off-by:
-
Gal Pressman authored
Remove the unnecessary line break between the netdev name and reg state to the actual message that should be printed. For example, this: [86730.307236] ------------[ cut here ]------------ [86730.313496] netdevice: enp27s0f0 Message from the driver [...] Will be replaced with: [86770.259289] ------------[ cut here ]------------ [86770.265191] netdevice: enp27s0f0: Message from the driver [...] Signed-off-by:
-
Gal Pressman authored
netdev_WARN_ONCE is broken (whoops..), this fix will remove the unnecessary "condition" parameter, add the missing comma and change "arg" to "args". Fixes: 375ef2b1 ("net: Introduce netdev_*_once functions") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree: 1) Free hooks via call_rcu to speed up netns release path, from Florian Westphal. 2) Reduce memory footprint of hook arrays, skip allocation if family is not present - useful in case decnet support is not compiled built-in. Patches from Florian Westphal. 3) Remove defensive check for malformed IPv4 - including ihl field - and IPv6 headers in x_tables and nf_tables. 4) Add generic flow table offload infrastructure for nf_tables, this includes the netlink control plane and support for IPv4, IPv6 and mixed IPv4/IPv6 dataplanes. This comes with NAT support too. This patchset adds the IPS_OFFLOAD conntrack status bit to indicate that this flow has been offloaded. 5) Add secpath matching support for nf_tables, from Florian. 6) Save some code bytes in the fast path for the nf_tables netdev, bridge and inet families. 7) Allow one single NAT hook per point and do not allow to register NAT hooks in nf_tables before the conntrack hook, patches from Florian. 8) Seven patches to remove the struct nf_af_info abstraction, instead we perform direct calls for IPv4 which is faster. IPv6 indirections are still needed to avoid dependencies with the 'ipv6' module, but these now reside in struct nf_ipv6_ops. 9) Seven patches to handle NFPROTO_INET from the Netfilter core, hence we can remove specific code in nf_tables to handle this pseudofamily. 10) No need for synchronize_net() call for nf_queue after conversion to hook arrays. Also from Florian. 11) Call cond_resched_rcu() when dumping large sets in ipset to avoid softlockup. Again from Florian. 12) Pass lockdep_nfnl_is_held() to rcu_dereference_protected(), patch from Florian Westphal. 13) Fix matching of counters in ipset, from Jozsef Kadlecsik. 14) Missing nfnl lock protection in the ip_set_net_exit path, also from Jozsef. 15) Move connlimit code that we can reuse from nf_tables into nf_conncount, from Florian Westhal. And asorted cleanups: 16) Get rid of nft_dereference(), it only has one single caller. 17) Add nft_set_is_anonymous() helper function. 18) Remove NF_ARP_FORWARD leftover chain definition in nf_tables_arp. 19) Remove unnecessary comments in nf_conntrack_h323_asn1.c From Varsha Rao. 20) Remove useless parameters in frag_safe_skb_hp(), from Gao Feng. 21) Constify layer 4 conntrack protocol definitions, function parameters to register/unregister these protocol trackers, and timeouts. Patches from Florian Westphal. 22) Remove nlattr_size indirection, from Florian Westphal. 23) Add fall-through comments as -Wimplicit-fallthrough needs this, from Gustavo A. R. Silva. 24) Use swap() macro to exchange values in ipset, patch from Gustavo A. R. Silva. ==================== Signed-off-by:
-
- 08 Jan, 2018 23 commits
-
-
Yafang Shao authored
As of now, there're two sk_family are traced with sock:inet_sock_set_state, which are AF_INET and AF_INET6. So the sk_family are exposed as well. Then we can conveniently use it to do the filter. Both sk_family and sk_protocol are showed in the printk message, so we need not expose them as tracepoint arguments. Suggested-by:
Brendan Gregg <brendan.d.gregg@gmail.com> Suggested-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
-
Guillaume Nault authored
The "offset" option has been removed by commit 900631ee ("l2tp: remove configurable payload offset"). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Acked-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Russell King authored
The mask argument for phy_modify() in several locations was inverted. Fixes: fea23fb5 ("net: phy: convert read-modify-write to phy_modify()") Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Zhu Yanjun authored
Since both first_rx and rx_ring are the head of rx ring, it not necessary to use two structure members to statically indicate the head of rx ring. So first_rx is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Stefano Brivio authored
The two conditions triggering BUG_ON() are somewhat unrelated: the tcp_skb_pcount() check is meant to catch TSO flaws, the second one checks sanity of congestion window bookkeeping. Split them into two separate BUG_ON() assertions on two lines, so that we know which one actually triggers, when they do. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David Ahern authored
Allow a process bound to a VRF to connect to a linklocal address. Currently, this fails because of a mismatch between the scope of the linklocal address and the sk_bound_dev_if inherited by the VRF binding: $ ssh -6 fe80::70b8:cff:fedd:ead8%eth1 ssh: connect to host fe80::70b8:cff:fedd:ead8%eth1 port 22: Invalid argument Relax the scope check to allow the socket to be bound to the same L3 device as the scope id. This makes ipv6 linklocal consistent with other relaxed checks enabled by commits 1ff23bee ("net: l3mdev: Allow send on enslaved interface") and 7bb387c5 ("net: Allow IP_MULTICAST_IF to set index to L3 slave"). Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
Since the commit 888cc8c2 ("sh_eth: remove EDMAC_BIG_ENDIAN") (geez, I didn't realize that was 2 years ago!) the initializers in the SuperH platform code for the 'sh_eth_plat_data::edmac_endian' stopped to matter, so we can remove that field for good (not sure if it was ever useful -- SH7786 Ether has been reported to have the same EDMAC descriptor/register endiannes as configured for the SuperH CPU)... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== add some new features and fix some bugs for HNS3 driver This patchset adds some new features support and fixes some bugs: [Patch 1/20] adds support to enable/disable vlan filter with ethtool [Patch 2/20] disables VFs change rxvlan offload status [Patch 3/20 - 13/120 fix bugs and refine some codes for packet statistics, support query with both ifconfig and ethtool. [Patch 14/20 - 20/20] fix some other bugs. ==================== Signed-off-by: -
Jian Shen authored
The statistics of rx/tx packets size greater than 1518 are not detailed. This patch adds more statistics for different packet size range. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
There is a redundant semicolon, this patch removes it. Signed-off-by:
-
Fuyun Liang authored
Pause parameters include source address, transmit gap and pause time. The default value of the pause source address is zero in the hardware. Default pause parameters need to be set to the hardware. Also, when setting new mac address, the pause source address need to be updated. Fixes: 9dc2145d ("net: hns3: Add support for PFC setting in TM module") Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
-
Fuyun Liang authored
When initializing the MAC, the MTU vlaue need to be set to the hardware too. Otherwise, the MTU value of software will be different from the MTU value of hardware. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Fuyun Liang authored
when changing MTU, The new MTU must need to be set to netdevice. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by:
-
Fuyun Liang authored
When setting MTU, actually what we do is configuring the max frame size for the hardware. ETH_HLEN、ETH_FCS_LEN and VLAN_HLEN must need to be considered. And the frame size which is less than the default value should not be set to the hardware. Because in the hardware, the the max frame size not only controls the RX packet size, but also controls the TX packet size. the RX packets whose size are greater than the setting value will be dropped. This patch fixes the bug setting a error max frame size to hardware. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Fuyun Liang authored
commit a9c782822166 ("net: hns3: add support for set_pauseparam") adds set_pauseparam support for ethtool cmd, but forgets to update fc_mode_last_time when PFC mode is disabled in hclge_cfg_pauseparam(). The wrong fc_mode_last_time will be used to update flow control mode when lldpad has been running. As a result, when using the ethtool command "-a", user will get a wrong pause parameter. This patch adds the fc_mode_last_time update when PFC mode is disabled. Fixes: a9c782822166 ("net: hns3: add support for set_pauseparam") Signed-off-by: -
Jian Shen authored
The result of tqp statistics query was read with an error position, fix it according to the user manual. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Jian Shen authored
Add packet statistics of netdev for ethtool -S, in order to show the statistics data for current net device. Remove update_stats() calling because it has been completed in hns3_get_netdev_stats(). Signed-off-by:
-
Jian Shen authored
The member "stats_size" of struct hns3_stats is useless, remove it and fix the macro definition which has uses this struct. Signed-off-by:
-
Jian Shen authored
The member "stats_offset" was designed to indicate the offset of each member of struct ring_stats in struct hns3_enet_ring, but forgot to add the offset of the member in struct ring_stats. Fixes: 496d03e9 ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by:
-
Jian Shen authored
An error loop index was used while querying statistics data of tqps, which may cause call trace. Fixes: 496d03e9 ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by:
-
Jian Shen authored
The dropped tx/rx packets number of each tqp should also be counted into the total drop tx/rx packets numbers. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Jian Shen authored
Update the HNS3_NIC_STATE_DOWN bit when NIC state changes. When NIC is down, mask the packet statistics for querying with ifconfig command. It's a common practice. Signed-off-by:
-
Jian Shen authored
It takes more than 200 query response messages between driver and IMP, while updating the packet statistics. It's too heavy for IMP to update it per second. Extend the update period of packet statistics data from 1 second to 300 seconds(if too long, the statistics may overflow). As a result, we need to update it while querying with ifconfig tool to keep the statistics data fresh. Signed-off-by:
-
