- 04 Feb, 2017 9 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add support to STM LSM6DS3H 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6ds3h.pdfSigned-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM LSM6DSL 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6dsl.pdfSigned-off-by:
-
Lorenzo Bianconi authored
Add capability to support multiple devices with the same st_lsm6dsx_settings like LSM6DSM/LSM6DSL Signed-off-by:
-
Andreas Klinger authored
This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by:Andreas Klinger <ak@it-klinger.de> Signed-off-by:
-
Andreas Klinger authored
This patch adds dt binding for devantech ultrasonic ranger srf04. The vendor "devantech" was already added to the vendor list with "[PATCH v4 1/3] iio: distance: srf08: add trivial DT binding" Signed-off-by: -
Derek Robson authored
Changed symbolic permissions to octal permissions. Found using checkpatch Signed-off-by:
Derek Robson <robsonde@gmail.com> Signed-off-by:
-
Matt Ranostay authored
Signed-off-by:
Matt Ranostay <matt@ranostay.consulting> Signed-off-by:
-
- 03 Feb, 2017 31 commits
-
-
Seraphime Kirkovski authored
This replaces the last occurrence of the deprecated <asm/uaccess.h> include in the staging directory with the newer <linux/uaccess.h> Signed-off-by:
Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
The problem is that we copy hdr.ioc_len, we verify it, then we copy it again without checking to see if it has changed in between the two copies. This could result in an information leak. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Zhengyi Shen authored
This is a patch to fix "WARNING: line over 80 characters" found by checkpatch.pl in vvp_page.c. Signed-off-by:
Zhengyi Shen <shenzhengyi@gmail.com> Signed-off-by:
-
James Simmons authored
The reason for __REQ_LAYOUT_USER__ was to expose a section of code in layout.c to userland for a utility similar to wireshark. This was done before wireshark existed but now that it does we no longer need to do this type of hack. This also reduces lustre_acl.h to strictly a kernel header now. Signed-off-by:
James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8945 Reviewed-on: https://review.whamcloud.com/24396Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
James Simmons authored
The use of 64 bit time introduces an expensive 64 bit division operation. Since the time lapse being calculated in osc_cache_too_much will never be more than seventy years we can cast the time lapse to an long and perform a normal 32 bit divison operation instead. Signed-off-by:
-
wang di authored
If an application attempts to remove millions of files in a single directory it will fail. This failure was tracked down to the nlink < 2 check in lmv_revalidate_slaves, because after nlink reaches to maximum value of LDISKFS_LINK_MAX (65000), the nlink broadcast back from the server will be reported as one. The return value of 1 is not invalid so lets remove the check. Signed-off-by:
wang di <di.wang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6984 Reviewed-on: http://review.whamcloud.com/16490Reviewed-by:
Jian Yu <jian.yu@intel.com> Reviewed-by:
-
Yang Sheng authored
The function generic_file_read_iter() does not check EOF before invoke direct_IO callback. So we have to check it ourselves. Signed-off-by:
Yang Sheng <yang.sheng@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8969 Reviewed-on: https://review.whamcloud.com/24552Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
Bobi Jam <bobijam@hotmail.com> Reviewed-by:
-
James Simmons authored
Building the lustre client with W=1 reports the following error: obdclass/obd_mount.c: In function lmd_parse: obdclass/obd_mount.c:880: warning: variable set but not used The solution is to move s3 to the inner loop where it is only used. Signed-off-by:
Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by:
-
Steve Guminski authored
This patch makes no functional changes. Struct initializers in the fid directory that use C89 or GCC-only syntax are updated to C99 syntax. The C99 syntax prevents incorrect initialization if values are accidently placed in the wrong position, allows changes in the struct definition, and clears any members that are not given an explicit value. The following struct initializers have been updated: lustre/fid/fid_lib.c: const struct lu_seq_range LUSTRE_SEQ_SPACE_RANGE const struct lu_seq_range LUSTRE_SEQ_ZERO_RANGE lustre/fid/lproc_fid.c: struct lprocfs_vars seq_client_debugfs_list Signed-off-by:Steve Guminski <stephenx.guminski@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210 Reviewed-on: https://review.whamcloud.com/23789Reviewed-by:
Nathaniel Clark <nathaniel.l.clark@intel.com> Reviewed-by:
-
Niu Yawei authored
The replay cursor should be updated properly when close happened during replay, otherwise, ptlrpc_replay_next() could run into a dead loop due to an invalid replay cursor: - replay cursor is moved to an open request during replay; - application close that open file, so the rq_replay of the open request is cleared; - ptlrpc_replay_next() calls ptlrpc_free_committed() to free committed/closed requests, the open request is removed from the committed list, so the replay cursor is changed to an empty list_head now. The open request won't be freed now since it's still held by the pending close request; - ptlrpc_replay_next() continue to move the replay cursor to next and run into a dead loop at the end; Another change in this patch is to remove the out of date comments in ptlrpc_replay_next() and cover the whole process of finding replay request within imp_lock, because: 1. With two separated replay lists and replay cursor introduced, finding replay request won't take much time as before, it's not necessary to do this "lock -> unlock -> lock -> unlock" trick anymore; 2. Nowadays there are various kind of non-replay requests are allowed during recovery, so ptlrpc_free_committed() may run in parallel to remove an open request while ptlrpc_replay_next() is iterating the open requests list; Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8765 Reviewed-on: https://review.whamcloud.com/23418Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
-
Dmitry Eremin authored
Update max_ptlrpcds module parameter descriptions to let users know its obsolete. Change cpt to CPT for the module parameter description ptlrpcd_per_cpt_max so it matches documentation. Signed-off-by:
-
Dmitry Eremin authored
Environment for request interpreters is not used any more. Signed-off-by:
-
James Simmons authored
Remove the inline function socklnd_init_msg. Its only used by the kernel code so no point keeping it in an UAPI header. Signed-off-by:
Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by:
-
Liang Zhen authored
ksocklnd reaper thread always tries to close the connection for the first timedout zero-copy TX. This is wrong if this connection is already being closed, because the reaper will see the same TX again and again and cannot find out other timedout zero-copy TXs and close connections for them. Signed-off-by:
Liang Zhen <liang.zhen@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8867 Reviewed-on: https://review.whamcloud.com/23973Reviewed-by:
-
John L. Hammond authored
In mdc_close() if ptlrpc_request_pack() fails then set req to NULL so that an already freed request is not returned in *request. Signed-off-by:
Patrick Farrell <paf@cray.com> Reviewed-by:
-
Patrick Farrell authored
An earlier commit accidentally changed handling of IT_OPEN, making it take the MDS_INODELOCK_UPDATE bits lock instead of MDS_INODELOCK_LOOKUP. This does not cause any known bugs. Signed-off-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
-
Steve Guminski authored
This patch makes no functional changes. Struct initializers in the libcfs directory that use C89 or GCC-only syntax are updated to C99 syntax. The C99 syntax prevents incorrect initialization if values are accidently placed in the wrong position, allows changes in the struct definition, and clears any members that are not given an explicit value. The following struct initializers have been updated: libcfs/include/libcfs/libcfs_crypto.h: static struct cfs_crypto_hash_type hash_types[] Signed-off-by:Frank Zago <fzago@cray.com> Reviewed-by:
-
Dmitry Eremin authored
Don't treat unability to set CPU partition affinity as error. Improve those warning messages. Signed-off-by:
-
John L. Hammond authored
None of the obd_notify() handlers listen for the OBD_NOTIFY_CREATE event, so remove it and its sole use in lov_add_target(). Signed-off-by:
Ben Evans <bevans@cray.com> Reviewed-by:
-
Vladimir Saveliev authored
ptlrpc_import_delay_req() refuses to delay blocking asts when import is not in LUSTRE_IMP_FULL yet. That leads to client eviction assuming that it failed to respond. Allow delays for blocking asts being resent. Signed-off-by:
Vladimir Saveliev <vladimir.saveliev@seagate.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8351 Seagate-bug-id: MRP-3500 Reviewed-on: https://review.whamcloud.com/21065Reviewed-by:
-
Steve Guminski authored
The patch updates the prototype in osc_internal.h to match the enums used in the declaration. The osc_match_base declaration in lustre/osc/osc_request.c uses enums for stricter checking on the type and mode parameters: int osc_match_base(struct obd_export *exp, ... --> enum ldlm_type type, union ldlm_policy_data *policy, --> enum ldlm_mode mode, ... int unref) The prototype in lustre/osc/osc_internal.h instead used unsigned ints: int osc_match_base(struct obd_export *exp, ... --> __u32 type, union ldlm_policy_data *policy, --> __u32 mode, ... int unref); Signed-off-by: -
Niu Yawei authored
reply_out_callback() should call ptlrpc_schedule_difficult_reply() to finalize the rs if it's already not on uncommitted list, otherwise, the rs and the export held by rs could be leaked: - target_send_reply() sends a difficult reply before the transaction committed, the reply is linked to scp_rep_active; - export gets disconnected by umount or whatever reason, server_disconnect_export() is called to complete all outstanding replies, which will calls into ptlrpc_handle_rs() to dispose of the rs, so the rs is removed from the uncommitted list and LNetMDUnlink() is called to unlink the reply buffer and generate an unlink event; - reply_out_callback() is called to process above unlink event, ptlrpc_schedule_difficult_reply() is supposed to be called to dispose of the rs finally. However, it could be skipped because of following flawed code snippet: if (!rs->rs_no_ack || rs->rs_transno <= rs->rs_export->exp_obd->obd_last_committed) ptlrpc_schedule_difficult_reply(rs); The intention of above code is: if rs_no_ack is true (COS enabled), and transaction is not committed, we should rely on commit callback to release the rs. However, it overlooked the situation that rs could have been removed from the uncommitted list by disconnecting export. Signed-off-by: -
James Simmons authored
Replace the ulong_ptr_t and long_ptr_t with standard kernel types. Signed-off-by:
-
Rahul Deshmukh authored
There exists timing race between umount and other thread which will increment the reference count on mnt e.g. getattr. If umount thread lose the race then umount fails with EBUSY error. To avoid this timed wait is added so that umount thread will wait for user to decrement the mnt reference count. Signed-off-by:
Rahul Deshmukh <rahul.deshmukh@seagate.com> Signed-off-by:
Lokesh Nagappa Jaliminche <lokesh.jaliminche@seagate.com> Signed-off-by:
-
Bobi Jam authored
So that debug log only contains relevant messages for debugging purpose. Signed-off-by:
Bobi Jam <bobijam.xu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8413 Reviewed-on: http://review.whamcloud.com/22753Reviewed-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
-
James Simmons authored
In the case of interval_tree.h only interval_set() uses LASSERT which is removed in this patch and interval_set() instead reports a real error. The header libcfs.h for interval_tree.h is not needed anymore so we can just use the standard linux kernel headers instead.h Signed-off-by:
-
Bobi Jam authored
lov_device::ld_target[ost_idx] could be NULL if the OST target is not filled in lov_device::ld_lov::lov_tgt_desc[ost_idx] yet. Signed-off-by:
-
Dmitry Eremin authored
Change default value of CPT pattern and make it match NUMA topology Signed-off-by:
Olaf Weber <olaf@sgi.com> Reviewed-by:
-
Dmitry Eremin authored
The function cfs_cpt_table_create_pattern() alters the string passed to it. Currently we are passing in the module parameter string cpu_pattern which is incorrect. Instead lets duplicate the module parameter string and pass that to the function cfs_cpt_table_create_pattern(). Signed-off-by:
-
Jinshan Xiong authored
OSC has to make sure that it won't issue write RPCs with too many chunks otherwise it will casue ZFS to create transactions much bigger than DMU_MAX_ACCESS in size, which will end up with write failure. Signed-off-by:
-
Niu Yawei authored
Sync write should update m/ctime promptly, otherwise, stale m/ctime could be updated on the OST object by the sync write RPC. Signed-off-by:
-
