While building m32r allmodconfig the build is failing with the error:

  ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined!

Xilinx Zynq FPGA is using DMA but there was no dependency while
building.

Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "A few updates and fixes:

   - move the suppressing of the __builtin_return_address >0 warning to
     the tracing directory only.

   - metag recordmcount fix for newer glibc's

   - two tracing histogram fixes that were reported by KASAN"

* tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix use-after-free in hist_register_trigger()
  tracing: Fix use-after-free in hist_unreg_all/hist_enable_unreg_all
  Makefile: Mute warning for __builtin_return_address(>0) for tracing only
  ftrace/recordmcount: Work around for addition of metag magic but not relocations

With gcc < 4.2 (e.g. 4.1.2):

      CC      fs/proc/task_mmu.o
    cc1: error: unrecognized command line option "-Wno-override-init"

To fix this, only enable the compiler option when it is actually
supported by the compiler.

Fixes: ca52953f ("fs/proc/task_mmu.c: suppress compilation warnings with W=1")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix several cases of missing of_node_put() calls in various
    networking drivers.  From Peter Chen.

 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval
    Mintz.

 3) Unbalanced locking in TIPC error handling, from Wei Yongjun.

 4) Fix lockups in CPDMA driver, from Grygorii Strashko.

 5) More MACSEC refcount et al fixes, from Sabrina Dubroca.

 6) Fix MAC address setting in r8169 during runtime suspend, from
    Chun-Hao Lin.

 7) Various printf format specifier fixes, from Heinrich Schuchardt.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  qed: Fail driver load in 100g MSI mode.
  ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle
  ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle
  ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle
  ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle
  ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle
  ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle
  ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle
  ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle
  ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle
  ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle
  ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle
  ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle
  ethernet: altera: add missing of_node_put
  8139too: fix system hang when there is a tx timeout event.
  qed: Fix error return code in qed_resc_alloc()
  net: qlcnic: avoid superfluous assignement
  dsa: b53: remove redundant if
  ...

Merge yet more updates from Andrew Morton:

 - the rest of ocfs2

 - various hotfixes, mainly MM

 - quite a bit of misc stuff - drivers, fork, exec, signals, etc.

 - printk updates

 - firmware

 - checkpatch

 - nilfs2

 - more kexec stuff than usual

 - rapidio updates

 - w1 things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  ipc: delete "nr_ipc_ns"
  kcov: allow more fine-grained coverage instrumentation
  init/Kconfig: add clarification for out-of-tree modules
  config: add android config fragments
  init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig
  relay: add global mode support for buffer-only channels
  init: allow blacklisting of module_init functions
  w1:omap_hdq: fix regression
  w1: add helper macro module_w1_family
  w1: remove need for ida and use PLATFORM_DEVID_AUTO
  rapidio/switches: add driver for IDT gen3 switches
  powerpc/fsl_rio: apply changes for RIO spec rev 3
  rapidio: modify for rev.3 specification changes
  rapidio: change inbound window size type to u64
  rapidio/idt_gen2: fix locking warning
  rapidio: fix error handling in mbox request/release functions
  rapidio/tsi721_dma: advance queue processing from transfer submit call
  rapidio/tsi721: add messaging mbox selector parameter
  rapidio/tsi721: add PCIe MRRS override parameter
  rapidio/tsi721_dma: add channel mask and queue size parameters
  ...

Pull orangefs update from Martin Brandenburg:
 "Kernel side caching and executable bugfix

  This allows OrangeFS to utilize the dcache and adds an in kernel
  attribute cache.  We previously used the user side client for this
  purpose.

  We see a modest performance increase on small file operations.  For
  example, without the cache, compiling coreutils takes about 17
  minutes.  With the patch and a 50 millisecond timeout for
  dcache_timeout_msecs and getattr_timeout_msecs (the default),
  compiling coreutils takes about 6 minutes 20 seconds.  On the same
  hardware, compiling coreutils on an xfs filesystem takes 90 seconds.
  We see similar improvements with mdtest and a test involving writing,
  reading, and deleting a large number of small files.

  Interested parties can review more data at the following URL.

    https://docs.google.com/spreadsheets/d/1v4aUeppKexIbRMz_Yn9k4eaM3uy2KCaPoe_93YKWOtA/pubhtml

  The eventual goal of this is to allow getdents to turn into a
  readdirplus to the OrangeFS server.  The cache will be filled then,
  which should provide a performance benefit to the common case of
  readdir followed by getattr on each entry (i.e.  ls -l).

  This also fixes a bug.  When orangefs_inode_permission was added, it
  did not collect i_size from the OrangeFS server, since this presses an
  unnecessary load on the OrangeFS server.  However, it left a case
  where i_size is never initialized.  Then running an executable could
  fail.

  With this patch, size is always collected to be inserted into the
  cache.  Thus the bug disappears.  If this patch is not accepted during
  this merge window, we will send a one-line band-aid for this bug
  instead"

* tag 'for-linus-v4.8' of git://github.com/martinbrandenburg/linux:
  Orangefs: update orangefs.txt
  orangefs: Account for jiffies wraparound.
  orangefs: Change default dcache and getattr timeout to 50 msec.
  orangefs: Allow dcache and getattr cache time to be configured.
  orangefs: Cache getattr results.
  orangefs: Use d_time to avoid excessive lookups

Pull Ceph updates from Ilya Dryomov:
 "The highlights are:

   - RADOS namespace support in libceph and CephFS (Zheng Yan and
     myself).  The stopgaps added in 4.5 to deny access to inodes in
     namespaces are removed and CEPH_FEATURE_FS_FILE_LAYOUT_V2 feature
     bit is now fully supported

   - A large rework of the MDS cap flushing code (Zheng Yan)

   - Handle some of ->d_revalidate() in RCU mode (Jeff Layton).  We were
     overly pessimistic before, bailing at the first sight of LOOKUP_RCU

  On top of that we've got a few CephFS bug fixes, a couple of cleanups
  and Arnd's workaround for a weird genksyms issue"

* tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-client: (34 commits)
  ceph: fix symbol versioning for ceph_monc_do_statfs
  ceph: Correctly return NXIO errors from ceph_llseek
  ceph: Mark the file cache as unreclaimable
  ceph: optimize cap flush waiting
  ceph: cleanup ceph_flush_snaps()
  ceph: kick cap flushes before sending other cap message
  ceph: introduce an inode flag to indicates if snapflush is needed
  ceph: avoid sending duplicated cap flush message
  ceph: unify cap flush and snapcap flush
  ceph: use list instead of rbtree to track cap flushes
  ceph: update types of some local varibles
  ceph: include 'follows' of pending snapflush in cap reconnect message
  ceph: update cap reconnect message to version 3
  ceph: mount non-default filesystem by name
  libceph: fsmap.user subscription support
  ceph: handle LOOKUP_RCU in ceph_d_revalidate
  ceph: allow dentry_lease_is_valid to work under RCU walk
  ceph: clear d_fsinfo pointer under d_lock
  ceph: remove ceph_mdsc_lease_release
  ceph: don't use ->d_time
  ...

Write-only variable.

Link: http://lkml.kernel.org/r/20160708214356.GA6785@p183.telecom.bySigned-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For more targeted fuzzing, it's better to disable kernel-wide
instrumentation and instead enable it on a per-subsystem basis.  This
follows the pattern of UBSAN and allows you to compile in the kcov
driver without instrumenting the whole kernel.

To instrument a part of the kernel, you can use either

    # for a single file in the current directory
    KCOV_INSTRUMENT_filename.o := y

or

    # for all the files in the current directory (excluding subdirectories)
    KCOV_INSTRUMENT := y

or

    # (same as above)
    ccflags-y += $(CFLAGS_KCOV)

or

    # for all the files in the current directory (including subdirectories)
    subdir-ccflags-y += $(CFLAGS_KCOV)

Link: http://lkml.kernel.org/r/1464008380-11405-1-git-send-email-vegard.nossum@oracle.comSigned-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It doesn't trim just symbols that are totally unused in-tree - it trims
the symbols unused by any in-tree modules actually built.  If you've
done a 'make localmodconfig' and only build a hundred or so modules,
it's pretty likely that your out-of-tree module will come up lacking
something...

Hopefully this will save the next guy from a Homer Simpson "D'oh!"
moment.

Link: http://lkml.kernel.org/r/10177.1469787292@turing-police.cc.vt.eduSigned-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Copy the config fragments from the AOSP common kernel android-4.4
branch.  It is becoming possible to run mainline kernels with Android,
but the kernel defconfigs don't work as-is and debugging missing config
options is a pain.  Adding the config fragments into the kernel tree,
makes configuring a mainline kernel as simple as:

  make ARCH=arm multi_v7_defconfig android-base.config android-recommended.config

The following non-upstream config options were removed:

  CONFIG_NETFILTER_XT_MATCH_QTAGUID
  CONFIG_NETFILTER_XT_MATCH_QUOTA2
  CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG
  CONFIG_PPPOLAC
  CONFIG_PPPOPNS
  CONFIG_SECURITY_PERF_EVENTS_RESTRICT
  CONFIG_USB_CONFIGFS_F_MTP
  CONFIG_USB_CONFIGFS_F_PTP
  CONFIG_USB_CONFIGFS_F_ACC
  CONFIG_USB_CONFIGFS_F_AUDIO_SRC
  CONFIG_USB_CONFIGFS_UEVENT
  CONFIG_INPUT_KEYCHORD
  CONFIG_INPUT_KEYRESET

Link: http://lkml.kernel.org/r/1466708235-28593-1-git-send-email-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Doing patches with allmodconfig kernel compiled and committing stuff
into local tree have unfortunate consequence: kernel version changes (as
it should) leading to recompiling and relinking of several files even if
they weren't touched (or interesting at all).  This and "git-whatever"
figuring out current version slow down compilation for no good reason.

But lets face it, "allmodconfig" kernels don't care about kernel
version, they are simply compile check guinea pigs.

Make LOCALVERSION_AUTO depend on !COMPILE_TEST, so it doesn't sneak into
allmodconfig .config.

Link: http://lkml.kernel.org/r/20160707214954.GC31678@p183.telecom.bySigned-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 20d8b67c ("relay: add buffer-only channels; useful for early
logging") added support to use channels with no associated files.

This is useful when the exact location of relay file is not known or the
the parent directory of relay file is not available, while creating the
channel and the logging has to start right from the boot.

But there was no provision to use global mode with buffer-only channels,
which is added by this patch, without modifying the interface where
initially there will be a dummy invocation of create_buf_file callback
through which kernel client can convey the need of a global buffer.

For the use case where drivers/kernel clients want a simple interface
for the userspace, which enables them to capture data/logs from relay
file inorder & without any post processing, support of Global buffer
mode is warranted.

Modules, like i915, using relay_open() in early init would have to later
register their buffer-only relays, once debugfs is available, by calling
relay_late_setup_files().  Hence relay_late_setup_files() symbol also
needs to be exported.

Link: http://lkml.kernel.org/r/1468404563-11653-1-git-send-email-akash.goel@intel.comSigned-off-by: Akash Goel <akash.goel@intel.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sprint_symbol_no_offset() returns the string "function_name
[module_name]" where [module_name] is not printed for built in kernel
functions.  This means that the blacklisting code will fail when
comparing module function names with the extended string.

This patch adds the functionality to block a module's module_init()
function by finding the space in the string and truncating the
comparison to that length.

Link: http://lkml.kernel.org/r/1466124387-20446-1-git-send-email-prarit@redhat.comSigned-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e93762bb ("w1: masters: omap_hdq: add support for 1-wire
mode") added a statement to clear the hdq_irqstatus flags in
hdq_read_byte().

If the hdq reading process is scheduled slowly or interrupts are
disabled for a while the hardware read activity might already be
finished on entry of hdq_read_byte().  And hdq_isr() already has set the
hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the
TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel.

This means there is no need to wait and the hdq_read_byte() can just
read the byte from the hdq controller.

By resetting hdq_irqstatus to 0 the read process is forced to be always
waiting again (because the if statement always succeeds) but the
hardware will not issue another RXCOMPLETE interrupt.  This results in a
false timeout.

After such a situation the hdq bus hangs.

Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.comSigned-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The helper macro module_w1_family can be used in module drivers that
only register a w1 driver in their module init functions.  Add this
macro and use it in all applicable drivers.

Link: http://lkml.kernel.org/r/20160531204313.20979-2-afd@ti.comSigned-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PLATFORM_DEVID_AUTO can be used to have the platform core assign a
unique ID instead of manually creating one with IDA.  Do this in all
applicable drivers.

Link: http://lkml.kernel.org/r/20160531204313.20979-1-afd@ti.comSigned-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add RapidIO switch driver for IDT Gen3 switch devices: RXS1632 and
RXS2448.

[alexandre.bounine@idt.com: fixup for original driver patch]
  Link: http://lkml.kernel.org/r/1469137596-18241-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-14-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Remove check for parallel PHY

 - Set LP-Serial Register Map type

[akpm@linux-foundation.org: fix build]
[alexandre.bounine@idt.com: fix build fix]
 Link: http://lkml.kernel.org/r/20160802184932.2755-1-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-13-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Implement changes made in RapidIO specification rev.3 to LP-Serial Physical
Layer register definitions:

 - use per-port register offset calculations based on LP-Serial Extended
   Features Block (EFB) Register Map type (I or II) with different
   per-port offset step (0x20 vs 0x40 respectfully).

 - remove deprecated Parallel Physical layer definitions and related
   code.

[alexandre.bounine@idt.com: fix DocBook warning for gen3 update]
  Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current definition of map_inb() mport operations callback uses u32 type
to specify required inbound window (IBW) size.  This is limiting factor
because existing hardware - tsi721 and fsl_rio, both support IBW size up
to 16GB.

Changing type of size parameter to u64 to allow IBW size configurations
larger than 4GB.

[alexandre.bounine@idt.com: remove compiler warning about size of constant]
  Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix lockdep warning during device probing: move sysfs initialization out
of code protected by a spin lock.

Link: http://lkml.kernel.org/r/1469125134-16523-10-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add checking for error code returned by HW-specific mbox open routines.
Ensure that resources are properly release if failed.

This patch is applicable to kernel versions starting from v2.6.15.

Link: http://lkml.kernel.org/r/1469125134-16523-9-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add advancing transfer queue immediately from transfer submit call.  DMA
performance improvement: This will start transfer without waiting for
'issue_pending' command if there is no DMA transfer in progress.

Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add module parameter to allow load time configuration of available
RapidIO messaging mailboxes (MBOX1 - MBOX4).

Having a messaging MBOX selector mask allows to define which MBOXes are
controlled by the mport device driver and reserve some of them for
direct use by other drivers.

Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow
users to override configuration register value set during PCIe bus
initialization.

Performance of Tsi721 device as PCIe bus master can be improved if MRRS
is set to its maximum value (4096 bytes).  Some platforms have
limitations for supported MRRS and therefore the default value should be
preserved, unless it is known that given platform supports full set of
MRRS values defined by PCI Express specification.

Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add module parameters to allow load time configuration of DMA channels.

Depending on application, performance of DMA data transfers can benefit
from adjusted sizes of buffer descriptor ring and/or transaction
requests queue.

Having HW DMA channel selector mask allows to define which channels
(from seven available) are controlled by the mport device driver and
reserve some of them for direct use by other drivers.

Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update return value description for rio_dma_prep_...  functions to
include error-valued pointer that can be returned by HW mport device
drivers.  Return values from these functions must be checked using
IS_ERR_OR_NULL macro.

This patch is applicable to kernel versions starting from v4.6-rc1.

Link: http://lkml.kernel.org/r/1469125134-16523-4-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Minor edits to correct parameter description.

This patch is applicable to kernel versions starting from v4.6.

Link: http://lkml.kernel.org/r/1469125134-16523-3-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "RapidIO subsystem updates".

This set of patches contains RapidIO subsystem fixes and updates that
have been made since kernel v4.6.  The most significant update brings
changes related to the latest revision of RapidIO specification
(rev.3.x) and introduction of next generation of RapidIO switches by IDT
(RXS1632 and RXS2448).

This patch (of 13):

This is RapidIO part of the original patch submitted by Joe Perches.
(see: https://lkml.org/lkml/2016/3/5/19)

Since commit 3cab1e71 ("lib/vsprintf: refactor duplicate code
to special_hex_number()") %pa uses have been output with a 0x prefix.

These 0x prefixes in the formats are unnecessary.

Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add channelized messaging driver to support native RapidIO messaging
exchange between multiple senders/recipients on devices that use kernel
RapidIO subsystem services.

This device driver is the result of collaboration within the RapidIO.org
Software Task Group (STG) between Texas Instruments, Prodrive
Technologies, Nokia Networks, BAE and IDT.  Additional input was
received from other members of RapidIO.org.

The objective was to create a character mode driver interface which
exposes messaging capabilities of RapidIO endpoint devices (mports)
directly to applications, in a manner that allows the numerous and
varied RapidIO implementations to interoperate.

This char mode device driver allows user-space applications to setup
messaging communication channels using single shared RapidIO messaging
mailbox.

By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by
RIONET Ethernet emulation driver).

[weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()]
  Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com
Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.comSigned-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I hit the following issue when run trinity in my system.  The kernel is
3.4 version, but mainline has the same issue.

The root cause is that the segment size is too large so the kerenl
spends too long trying to allocate a page.  Other cases will block until
the test case quits.  Also, OOM conditions will occur.

Call Trace:
  __alloc_pages_nodemask+0x14c/0x8f0
  alloc_pages_current+0xaf/0x120
  kimage_alloc_pages+0x10/0x60
  kimage_alloc_control_pages+0x5d/0x270
  machine_kexec_prepare+0xe5/0x6c0
  ? kimage_free_page_list+0x52/0x70
  sys_kexec_load+0x141/0x600
  ? vfs_write+0x100/0x180
  system_call_fastpath+0x16/0x1b

The patch changes sanity_check_segment_list() to verify that the usage by
all segments does not exceed half of memory.

[akpm@linux-foundation.org: fix for kexec-return-error-number-directly.patch, update comment]
Link: http://lkml.kernel.org/r/1469625474-53904-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If a crash kernel is loaded, do not crash the running domain.  This is
needed if the kernel is loaded with crash_kexec_post_notifiers, because
panic notifiers are run before __crash_kexec() in that case, and this
Xen hook prevents its being called later.

[akpm@linux-foundation.org: build fix: unconditionally include kexec.h]
Link: http://lkml.kernel.org/r/20160713122000.14969.99963.stgit@hananiah.suse.czSigned-off-by: Petr Tesarik <ptesarik@suse.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Provide a wrapper function to be used by kernel code to check whether a
crash kernel is loaded.  It returns the same value that can be seen in
/sys/kernel/kexec_crash_loaded by userspace programs.

I'm exporting the function, because it will be used by Xen, and it is
possible to compile Xen modules separately to enable the use of PV
drivers with unmodified bare-metal kernels.

Link: http://lkml.kernel.org/r/20160713121955.14969.69080.stgit@hananiah.suse.czSigned-off-by: Petr Tesarik <ptesarik@suse.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

crash_kexec_post_notifiers ia a boot option which controls whether the
1st kernel calls panic notifiers or not before booting the 2nd kernel.
However, there is no need to limit it to being modifiable only at boot
time.  So, use core_param instead of early_param.

Link: http://lkml.kernel.org/r/20160705113327.5864.43139.stgit@softrsSigned-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Provide kexec with the boot view of memory by overriding the normal
kexec translation functions added in a previous patch.  We also need to
fix a call to memblock in machine_kexec_prepare() so that we provide it
with a running-view physical address rather than a boot- view physical
address.

Link: http://lkml.kernel.org/r/E1b8koa-0004Hl-Ey@rmk-PC.armlinux.org.ukSigned-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This commit adds definition for cpu_on, cpu_off and cpu_suspend
commands.  These definitions must match the corresponding PSCI
definitions in boot monitor.

Having those command and corresponding PSCI support in boot monitor
allows run time CPU hot plugin.

Link: http://lkml.kernel.org/r/E1b8koV-0004Hf-2j@rmk-PC.armlinux.org.ukSigned-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec physical addresses are the boot-time view of the system.  For
certain ARM systems (such as Keystone 2), the boot view of the system
does not match the kernel's view of the system: the boot view uses a
special alias in the lower 4GB of the physical address space.

To cater for these kinds of setups, we need to translate between the
boot view physical addresses and the normal kernel view physical
addresses.  This patch extracts the current transation points into
linux/kexec.h, and allows an architecture to override the functions.

Due to the translations required, we unfortunately end up with six
translation functions, which are reduced down to four that the
architecture can override.

[akpm@linux-foundation.org: kexec.h needs asm/io.h for phys_to_virt()]
Link: http://lkml.kernel.org/r/E1b8koP-0004HZ-Vf@rmk-PC.armlinux.org.ukSigned-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On PAE systems (eg, ARM LPAE) the vmcore note may be located above 4GB
physical on 32-bit architectures, so we need a wider type than "unsigned
long" here.  Arrange for paddr_vmcoreinfo_note() to return a
phys_addr_t, thereby allowing it to be located above 4GB.

This makes no difference for kexec-tools, as they already assume a
64-bit type when reading from this file.

Link: http://lkml.kernel.org/r/E1b8koK-0004HS-K9@rmk-PC.armlinux.org.ukSigned-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Pratyush Anand <panand@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ensure that user memory sizes do not wrap around when validating the
user input, which can lead to the following input validation working
incorrectly.

[akpm@linux-foundation.org: fix it for kexec-return-error-number-directly.patch]
Link: http://lkml.kernel.org/r/E1b8koF-0004HM-5x@rmk-PC.armlinux.org.ukSigned-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Pratyush Anand <panand@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>