- 17 Oct, 2011 18 commits
-
-
Marc Kleine-Budde authored
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
huajun li authored
While preparing net flow caches, once a fail may cause potential memory leak , fix it. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The tcp_end field is not actually used by the hardware, so there is no need to set it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Add GRO support to the ehea driver. v3: [cascardo] no need to enable GRO, since it's enabled by default [cascardo] vgrp was removed in the vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
In preparation for adding GRO to ehea, remove LRO. v3: [cascardo] fixed conflict with vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Switch to using ndo_get_stats64 to get 64bit statistics. v3: [cascardo] use rtnl_link_stats64 as port stats Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The queue macros are many levels deep and it makes it harder to work your way through them when many of the versions are unused. Remove the unused versions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
If a nonlinear skb fits within the immediate area, use skb_copy_bits instead of copying the frags by hand. v3: [cascardo] fixed conflict with use of skb frag API Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
write_swqe2_TSO and write_swqe2_nonTSO are almost identical. For TSO we have to set the TSO and mss bits in the wqe and we only put the header in the immediate area, no data. Collapse both functions into write_swqe2_immediate. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Based on a patch from Michael Ellerman, clean up a significant portion of the transmit path. There was a lot of duplication here. Even worse, we were always checksumming tx packets and ignoring the skb->ip_summed field. Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why it was enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The ehea adapter has a mode where it will avoid partial cacheline DMA writes on receive by always padding packets to fall on a cacheline boundary. Unfortunately we currently aren't allocating enough space for a full ethernet MTU packet to be rounded up, so this optimisation doesn't hit. It's unfortunate that the next largest packet size exposed by the hypervisor interface is 2kB, meaning our skb allocation comes out of a 4kB SLAB. However the performance increase due to this optimisation is quite large and my TCP stream numbers increase from 900MB to 1000MB/sec. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
We weren't enabling any VLAN features so we missed out on checksum offload and TSO when using VLANs. Enable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
It seems like the ehea xmit routine and an ethtool change of TSO mode could race, resulting in corrupt packets. Checking gso_size is enough and we can use the helper function. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The num_tx_qps module option allows a user to configure a different number of tx and rx queues. Now the networking stack is multiqueue aware it makes little sense just to enable the tx queues and not the rx queues so remove the option. v3: [cascardo] fixed conflict with get_stats change Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
commit 18604c54 (ehea: NAPI multi queue TX/RX path for SMP) added driver specific logic for exiting napi mode. I'm not sure what it was trying to solve and it should be up to the network stack to decide when we are done polling so remove it. v3: [cascardo] Fixed extra parentheses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The ehea driver had some multiqueue support but was missing the last few years of networking stack improvements: - Use skb_record_rx_queue to record which queue an skb came in on. - Remove the driver specific netif_queue lock and use the networking stack transmit lock instead. - Remove the driver specific transmit queue hashing and use skb_get_queue_mapping instead. - Use netif_tx_{start|stop|wake}_queue where appropriate. We can also remove pr->queue_stopped and just check the queue status directly. - Print all 16 queues in the ethtool stats. We now enable multiqueue by default since it is a clear win on all my testing so far. v3: [cascardo] fixed use_mcs parameter description [cascardo] set ehea_ethtool_stats_keys as const Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Remove the deprecated NETIF_F_LLTX feature. Since the network stack now provides the locking we can remove the driver specific pr->xmit_lock. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
- 16 Oct, 2011 5 commits
-
-
Michał Mirosław authored
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When enabling hardware timestamping for ptp v2 event packets, the software does not setup the queue for l4 packets, although layer 4 packets are valid for v2. This patch adds the flag which enables setting up a queue and enabling udp packet timestamping. Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Implements the new netdev op to allow user configuration of spoof checking on a per VF basis. V2 - Change netdev spoof check op setting to bool Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Add configuration setting for drivers to turn spoof checking on or off for discrete VFs. v2 - Fix indentation problem, wrap the ifla_vf_info structure in #ifdef __KERNEL__ to prevent user space from accessing and change function paramater for the spoof check setting netdev op from u8 to bool. v3 - Preset spoof check setting to -1 so that user space tools such as ip can detect that the driver didn't report a spoofcheck setting. Prevents incorrect display of spoof check settings for drivers that don't report it. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update statistics more accurately and on-demand through the net_device_ops .ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_PROVE_LOCKING=y). The commit introduced code paths that caused a mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when irqbalance reads the stats from /sys/class/net/ethX/statistics causing the mutex to be locked to read the Phy half-duplex statistics registers. The mutex was originally introduced to prevent concurrent accesses of resources (the NVM and Phy) shared by the driver, firmware and hardware a few years back when there was an issue with the NVM getting corrupted. It was later split into two mutexes - one for the NVM and one for the Phy when it was determined the NVM, unlike the Phy, should not be protected by the software/firmware/hardware semaphore (arbitration of which is done in part with the SWFLAG bit in the EXTCNF_CTRL register). This latter semaphore should be sufficient to prevent resource contention of the Phy in the driver (i.e. the mutex for Phy accesses is not needed), but to be sure the mutex is replaced with an atomic bit flag which will warn if any contention is possible. Also add additional debug output to help determine when the sw/fw/hw semaphore is owned by the firmware or hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
-
- 14 Oct, 2011 17 commits
-
-
Daniel Drake authored
The recent changes to only power the device when the interface up introduced a bug: changing interface type, legal when the interface is down, performs device I/O. Fix this functionality by validating and recording the interface type when the change is requested, but only applying the change if/when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Only station flags that are already defined in nl80211 are added for now. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Reuse the already existing struct nl80211_sta_flag_update to specify both, a flag mask and the flag set itself. This means nl80211_sta_flag_update is now used for setting station flags and also for getting station flags. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The queue mapping/TID for non-QoS null data responses to is never set, making it default to BK. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The AR946/8x chips are 2x2 Dual band with BT support. In order to avoid misleading with other chips and to be in sync with marketing team's term, AR9480 is renamed as AR9462. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Support the fast channel change across band switch only when there are available of reusable cabliration results. And also observed that doing agc control calibration on fastcc, sometimes causing calibration timeout. Hence changing agc control to be run only on full chip reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Supported calibrations of radio retention table (RTT) are - DC offset - Filter - Peak detect Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
To improve sensitivity for AR9480, the normal and minimum noise floor values of both bands are updated. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The commit "ath9k_hw: Improve fast channel change for AR9003 chips" fixes the fast channel change issue for AR9003 chips that was originally observed in AR9382 chip. Hence enabling fastcc support again for 11A channel for AR9003 chips. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Currently Tx IQ calibration is enabled by default for all AR9003 chips. But for AR9480, the calibration status should be read from chip after processing ini. And also the carrier leak calibration status is checked during init cal. As the init_cal is being called for fast channel change too, the tx_cl status only be read after full reset. Hence moving that into process ini function. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
This patch adds support to reuse Carrier leak calibration during fast channel change for AR9480 chips. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Pass an argument to decide whether to reuse the Tx IQ calibration measurements or not during fast channel change. This will be later used by MCI support for AR9480. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
In order to reduce the overall scan time, fast channel change should be implemented properly. This patch adds fast channel change support across band switch or channel mode switch instead of doing full chip reset. During the fastcc, tx iqcal measurements are preserved and will be reloaded after successful the channel change. This patch also addressed fast channel issue where the STA can not see APs in higher than operating channel on 5GHz band after the association. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The 5G Tx gain table w/ XPA is updated to improve spur performance in high_power Tx gain table. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The ar9003 table is updated to increase XLNA BIAS output driver strengh. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-