- 19 Apr, 2020 12 commits
-
-
Alexandru Ardelean authored
This change uses the read_avail and '.info_mask_shared_by_type_available' modifier to set the available scale. Essentially, nothing changes to the driver's ABI. The main idea for this patch is to remove the AD7793 driver from checkpatch's radar. There have been about ~3 attempts to fix/break the 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed it to be an arithmetic operation and people were trying to change that. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lars-Peter Clausen authored
Before activating a buffer make sure that at least one channel is enabled. Activating a buffer with 0 channels enabled doesn't make too much sense and disallowing this case makes sure that individual driver don't have to add special case code to handle it. Currently, without this patch enabling a buffer is possible and no error is produced. With this patch -EINVAL is returned. An example of execution with this patch and some instrumented print-code: root@analog:~# cd /sys/bus/iio/devices/iio\:device3/buffer root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable 0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask 00000000 1: iio_verify_update 753 2:__iio_update_buffers 1115 ret -22 3: iio_buffer_store_enable 1241 ret -22 -bash: echo: write error: Invalid argument 1, 2 & 3 are exit-error paths. 0 the first print in iio_verify_update() rergardless of error path. Without this patch (and same instrumented print-code): root@analog:~# cd /sys/bus/iio/devices/iio\:device3/buffer root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable 0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask 00000000 root@analog:/sys/bus/iio/devices/iio:device3/buffer# Buffer is enabled with no error. Note from Jonathan: Probably not suitable for automatic application to stable. This has been there from the very start. It tidies up an odd corner case but won't effect any 'real' users. Fixes: 84b36ce5 ("staging:iio: Add support for multiple buffers") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Takashi Iwai authored
snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may go beyond the given limit easily. Although the current code doesn't actually overflow the buffer, it's an incorrect usage. This patch replaces such snprintf() calls with a safer version, scnprintf(). Also this fixes the incorrect argument of the buffer limit size passed to snprintf(), too. The size has to be decremented for the remaining length. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Rohit Sarkar authored
Replace usage indio_dev's mlock with either local lock or iio_device_claim_direct_mode. Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by:
-
Rohit Sarkar authored
Instead of of_property_read_xxx use device_property_read_xxx as it is compatible with ACPI too as opposed to only device tree. Signed-off-by:
-
Mike Looijmans authored
The BMI088 is pin-compatible with the BMI055, and provides both gyro and accel functions. The gyro part is similar to the BMI055 and this adds the chip to the list of supported devices for the gyro part. The accel part of the chip is not compatible with anything existing already. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
-
Alexandru Ardelean authored
Commit 3862828a ("iio: buffer: Switch to bitmap_zalloc()") introduced bitmap_alloc(), but commit 20ea39ef ("iio: Fix scan mask selection") reverted it. This change adds it back. The only difference is that it's adding bitmap_zalloc(). There might be some changes later that would require initializing it to zero. In any case, now it's already zero-ing the trialmask. Appears to have been the result of merge conflict resolution rather than an intentional revert. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Syed Nayyar Waris authored
Add Syed Nayyar Waris as a co-maintainer for the ACCES 104-QUAD-8 counter driver. Signed-off-by:
Syed Nayyar Waris <syednwaris@gmail.com> Acked-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
Alexandru Ardelean authored
Now that all channel SigmaDelta IIO channel macros have been localized, remove the generic ones. Signed-off-by:
-
Alexandru Ardelean authored
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by:
-
Alexandru Ardelean authored
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by:
-
Alexandru Ardelean authored
This change gets rid of the AD_SD_*_CHANNEL macros in favor of defining it's own. The ad7780 is quite simpler than it's other Sigma-Delta brothers. It turned out that centralizing the AD_SD_*_CHANNEL macros doesn't scale too well, especially with some more complicated drivers. Some of the variations in the more complicated drivers require new macros, and that way things can become harder to maintain. Signed-off-by:
-
- 21 Mar, 2020 18 commits
-
-
Nishant Malpani authored
This patch renames macro to fix the following warning generated by checkpatch.pl: WARNING: 'DISBLED' may be misspelled - perhaps 'DISABLED'? Signed-off-by:
Nishant Malpani <nish.malpani25@gmail.com> Signed-off-by:
-
Rohit Sarkar authored
"mlock" should ideally only be used by the iio core. The mlock implementation may change in the future which means that no driver should be explicitly using mlock. Signed-off-by:
-
Daniel Campello authored
Add SEMTECH SX9310/9311 driver. The device has the following entry points: Usual frequency: - sampling_frequency - sampling_frequency_available Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_comb_raw and associated events in events/ Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Enrico Granata <egranata@chromium.org> Signed-off-by:
Daniel Campello <campello@chromium.org> Signed-off-by:
-
Beniamin Bia authored
Use devm_add_action_or_reset to automatically disable the device when it is removed or an error occurs during probe routine. Signed-off-by:
Beniamin Bia <beniamin.bia@analog.com> Signed-off-by:
-
Dragos Bogdan authored
AD7091R is already supported by this driver. While AD7091R allows the choice of an internal or an external voltage reference, for AD7091 the reference is only provided by VDD. Since this information is anyway obtained through the "vcc" regulator, no other driver changes are required for adding AD7091 support as well. Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by:
-
Dragos Bogdan authored
When CONVST signal is generated internally, IIO_CHAN_INFO_RAW can be made available for AD7091R for single reads. This patch enables it and makes supporting more devices by this driver easier. Signed-off-by:
-
Dragos Bogdan authored
Compared to the other supported parts, AD7091R are dependent of a CONVST signal that initiates the conversion. At this moment, only sampling in buffered mode is supported for AD7091R and the only option until now was to generate this signal externally using an IIO trigger. This patch adds the option of generating it internally, more compatible triggers being available in this case. Also, it is an intermediate step of adding support more devices. Signed-off-by:
-
Andy Shevchenko authored
There is no need to call unaligned helpers on stack placed variables because compiler will align them correctly, accordingly to architectural ABI. Moreover, using bitwise type makes it explicit to see what we are reading in bulk transfer. On top of that, use sizeof() instead of magic value. Signed-off-by:
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by:
-
Andy Shevchenko authored
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by:
-
Andy Shevchenko authored
Use dev_get_platdata() to get the platform_data instead of referencing it directly. Signed-off-by:
-
Andy Shevchenko authored
For easy grepping on debug purposes join string literals back in the messages. No functional change. Signed-off-by:
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by:
-
Andy Shevchenko authored
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by:
-
Andy Shevchenko authored
Use dev_get_platdata() to get the platform_data instead of referencing it directly. Signed-off-by:
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
-
Lars-Peter Clausen authored
It appears the author of the xilinx-xadc driver can't even spell his own name correctly. Fix that. Reported-by:
Lars Möllendorf <lars.moellendorf@plating.de> Signed-off-by:
-
- 20 Mar, 2020 10 commits
-
-
Sergio Paracuellos authored
Function 'devm_gpiod_get_index_optional' returns NULL if the descriptor is invalid and the error associated for the error pointer is ENOENT. Sometimes if the pin is just assigned the error associated for the pointer might not be ENOENT but other. In order to avoid weirds behaviours if this happen set descriptor to NULL in the driver port structure. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-6-sergio.paracuellos@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
We are using the counter to print the slot which has been enabled. Use the correct associated slot for the port instead. Signed-off-by:
-
Sergio Paracuellos authored
In order to align work with the mt7621-pci-phy part of the driver and device tree which is now using only two real phys one of them dual ported properly parse the device tree and don't call phy initialization for the slot 1 because is being taking into account when the phy for the slot 0 is instantiated. Signed-off-by:
-
Sergio Paracuellos authored
This soc has only two real pcie phys one of them having a different register to enable and disable it. Change this to have only two dt nodes for the phys and use 'phy-cells' properly to say if the phy has dual ports. Signed-off-by:
-
Sergio Paracuellos authored
This soc has two phy's for the pcie one of them using just a different register for settig it up but sharing all the rest of the config. Until now we was presenting this schema as three different phy's in the device tree using the 'phy-cells' node property to discriminate an index and setting up a complete phy for the dual port index. This sometimes worked properly but reconfiguring the same registers twice presents sometimes some unstable pcie links and the ports was not properly being detected. The problems only appears on hard resets and soft resets was properly working. Instead of having this schema just set two phy's in the device ree and use the 'phy-cells' property to say if the port has or not a dual port. Doing this configuration and set up becomes easier, LOC is decreased and the behaviour also gets deterministic with properly and stable pcie links in both hard and soft resets. Signed-off-by:
-
R Veera Kumar authored
Correct long lines of comments to respect 80 character per line limit and make them C89 style one. Found using checkpatch.pl. Signed-off-by:
R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200320024337.4754-1-vkor@vkten.inSigned-off-by:
-
R Veera Kumar authored
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by:
-
R Veera Kumar authored
Correct multi-line comments as per coding style to respect 80 characters per line limit. Amalgamate individual lines into single multiline comment. Reorganize it for readability. Signed-off-by:
-
Lourdes Pedrajas authored
use netdev_err() which is a message printing function specific for network devices instead of pr_err(), in function netlink_send(). Signed-off-by:
Lourdes Pedrajas <lu@pplo.net> Link: https://lore.kernel.org/r/20200320003947.31726-1-lu@pplo.netSigned-off-by:
-
Gokce Kuler authored
Remove unnecessary braces for single statement block Signed-off-by:
Gokce Kuler <gokcekuler@gmail.com> Link: https://lore.kernel.org/r/20200320000326.GA9349@siyah2Signed-off-by:
-
