- 30 Sep, 2016 3 commits
-
-
Frank Sorenson authored
Add a hash_cred() function for auth_unix, using both the uid and gid from the auth_cred. Signed-off-by:
Frank Sorenson <sorenson@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Frank Sorenson authored
Add a hash_cred() function for generic_auth, using both the uid and gid from the auth_cred. Signed-off-by:
-
Frank Sorenson authored
Currently, a single hash algorithm is used to hash the auth_cred for the credcache for all rpc_auth types. Add a hash_cred() function to the rpc_authops struct to allow a hash function specific to each auth flavor. Signed-off-by:
-
- 29 Sep, 2016 1 commit
-
-
Olga Kornievskaia authored
If an operation got interrupted, then since we don't know if the server processed it on not, we keep the seq#. Upon reuse of slot and seq# if we get reply from the cache (ie EREMOTEIO) then we need to retry the operation after bumping the seq# Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
- 27 Sep, 2016 33 commits
-
-
Trond Myklebust authored
Fix the code so that we always mark the atime as invalid in nfs4_read_done(). Currently, the expectation appears to be that the pNFS drivers should always do this, with the result that most of them don't. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Ke Wang authored
sunrpc uses workqueue to clean cache regulary. There is no real dependency of executing work on the cpu which queueing it. On a idle system, especially for a heterogeneous systems like big.LITTLE, it is observed that the big idle cpu was woke up many times just to service this work, which against the principle of power saving. It would be better if we can schedule it on a cpu which the scheduler believes to be the most appropriate one. After apply this patch, system_wq will be replaced by system_power_efficient_wq for sunrpc. This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected. Signed-off-by:
Ke Wang <ke.wang@spreadtrum.com> Signed-off-by:
-
Trond Myklebust authored
TEST_STATEID only tells you that you have a valid open stateid. It doesn't tell the client anything about whether or not it holds the required share locks. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> [Anna: Wrap nfs_open_stateid_recover_openmode in CONFIG_NFS_V4_1 checks] Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
_nfs41_free_stateid() needs to be cached by the session, but nfs41_test_stateid() may return NFS4ERR_RETRY_UNCACHED_REP (in which case we should just retry). Signed-off-by:
-
Trond Myklebust authored
If the file permissions change on the server, then we may not be able to recover open state. If so, we need to ensure that we mark the file descriptor appropriately. Cc: stable@vger.kernel.org Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
We need to test the NFS_OPEN_STATE flag for whether or not the open_stateid is valid. Signed-off-by:
-
Trond Myklebust authored
If we're not yet sure that all state has expired or been revoked, we should try to do a minimal recovery on just the one stateid. Signed-off-by:
-
Trond Myklebust authored
Don't rely on nfs_inode_detach_delegation() succeeding. That can race... Signed-off-by:
-
Trond Myklebust authored
If we're replacing an old stateid which has a different 'other' field, then we probably need to free the old stateid. Signed-off-by:
-
Trond Myklebust authored
If we race with a delegreturn before taking the spin lock, we currently end up dropping the delegation stateid. Signed-off-by:
-
Trond Myklebust authored
The actual stateid used in the READ or WRITE can represent a delegation, a lock or a stateid, so it is useful to pass it as an argument to the exception handler when an expired/revoked response is received from the server. It also ensures that we don't re-label the state as needing recovery if that has already occurred. Signed-off-by:
-
Trond Myklebust authored
Handle revoked open/lock/delegation stateids when LAYOUTGET tells us the state was revoked. Signed-off-by:
-
Trond Myklebust authored
If the server tells us our stateid has expired, then handle that as if it was revoked. Signed-off-by:
-
Trond Myklebust authored
If the server tells us our stateid has expired, then handle that as if it was revoked. Signed-off-by:
-
Trond Myklebust authored
Modify the helper nfs_inode_find_state_and_recover() so that it can check all open/lock/delegation state trackers on that inode for whether or not they need are affected by a revoked stateid error. Signed-off-by:
-
Trond Myklebust authored
This fixes a potential infinite loop in nfs_reap_expired_delegations. Signed-off-by:
-
Trond Myklebust authored
If a server returns NFS4ERR_ADMIN_REVOKED, NFS4ERR_DELEG_REVOKED or NFS4ERR_EXPIRED on a call to close, open_downgrade, delegreturn, or locku, we should call FREE_STATEID before attempting to recover. Signed-off-by:
-
Trond Myklebust authored
Nothing should need to be serialised with FREE_STATEID on the client, so let's make the RPC call always asynchronous. Also constify the stateid argument. Signed-off-by:
-
Trond Myklebust authored
Right now, we're only running TEST/FREE_STATEID on the locks if the open stateid recovery succeeds. The protocol requires us to always do so. The fix would be to move the call to TEST/FREE_STATEID and do it before we attempt open recovery. Signed-off-by:
-
Trond Myklebust authored
In some cases (e.g. when the SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED sequence flag is set) we may already know that the stateid was revoked and that the only valid operation we can call is FREE_STATEID. In those cases, allow the stateid to carry the information in the type field, so that we skip the redundant call to TEST_STATEID. Signed-off-by:
-
Trond Myklebust authored
Ensure we don't spam the server with test_stateid() calls for delegations that have already been checked. Signed-off-by:
-
Trond Myklebust authored
Ensure that if the server reboots while we're testing and recovering from revoked delegations, we exit to allow the state manager to handle matters. Signed-off-by:
-
Trond Myklebust authored
According to RFC5661, if any of the SEQUENCE status bits SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED, SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED, SEQ4_STATUS_ADMIN_STATE_REVOKED, or SEQ4_STATUS_RECALLABLE_STATE_REVOKED are set, then we need to use TEST_STATEID to figure out which stateids have been revoked, so we can acknowledge the loss of state using FREE_STATEID. While we already do this for open and lock state, we have not been doing so for all the delegations. Signed-off-by:
-
Trond Myklebust authored
Allow the callers of nfs_remove_bad_delegation() to specify the stateid that needs to be marked as bad. Signed-off-by:
-
Trond Myklebust authored
In NFSv4.1 and newer, if the server decides to revoke some or all of the protocol state, the client is required to iterate through all the stateids that it holds and call TEST_STATEID to determine which stateids still correspond to valid state, and then call FREE_STATEID on the others. Signed-off-by:
-
Trond Myklebust authored
If the server crashes while we're testing stateids for validity, then we want to initiate session recovery. Usually, we will be calling from a state manager thread, though, so we don't really want to wait. Signed-off-by:
-
Trond Myklebust authored
If the delegation has been marked as revoked, we don't have to test it, because we should already have called FREE_STATEID on it. Signed-off-by:
-
Trond Myklebust authored
We must not allow the use of delegations that have been revoked or are being returned. Signed-off-by:
-
Trond Myklebust authored
If the delegation is revoked, then it can't be used for caching. Fixes: 869f9dfa ("NFSv4: Fix races between nfs_remove_bad_delegation()...") Signed-off-by:
-
Trond Myklebust authored
Due to inode number reuse in filesystems, we can end up corrupting the inode on our client if we apply the file attributes without ensuring that the filehandle matches. Typical symptoms include spurious "mode changed" reports in the syslog. We still do want to ensure that we don't invalidate the dentry if the inode number matches, but we don't have a filehandle. Fixes: fa923369 ("NFS: Don't require a filehandle to refresh...") Signed-off-by:
-
Trond Myklebust authored
As described in RFC5661, section 18.46, some of the status flags exist in order to tell the client when it needs to acknowledge the existence of revoked state on the server and/or to recover state. Those flags will then remain set until the recovery procedure is done. In order to avoid looping, the client therefore needs to ignore those particular flags while recovering. Signed-off-by:
-
- 23 Sep, 2016 3 commits
-
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context frwr_op_unmap_sync() reinit_completion() ib_post_send() wait_for_completion() frwr_wc_localinv_wake() complete() Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The generic caching code from sunrpc is calling revisit() only once. The usage pattern of the completion is: waiter context waker context do_cache_lookup_wait() nfs_cache_defer_req_alloc() init_completion() do_cache_lookup() nfs_cache_wait_for_upcall() wait_for_completion_timeout() nfs_dns_cache_revisit() complete() nfs_cache_defer_req_put() Signed-off-by: -
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). nfs_file_direct_write() or nfs_file_direct_read() allocated a request object via nfs_direct_req_alloc(), which initializes the completion. The request object then is freed later in the exit path. Between the initialization and the release either nfs_direct_write_schedule_iovec() resp nfs_direct_read_schedule_iovec() are called which will asynchronously process the request. The calling function waits via nfs_direct_wait() till the async work has been done. Thus there is only one waiter on the completion. nfs_direct_pgio_init() and nfs_direct_read_completion() are passed via function pointers to nfs pageio. The first function does a ref counting (get_dreq() and put_dreq()) which ensures that nfs_direct_read_completion() and nfs_direct_read_schedule_iovec() only call the completion path once. The usage pattern of the completion is: waiter context waker context nfs_file_direct_write() dreq = nfs_direct_req_alloc() init_completion() nfs_direct_write_schedule_iovec() nfs_direct_wait() wait_for_completion_killable() nfs_direct_write_schedule_work() nfs_direct_complete() complete() nfs_file_direct_read() dreq = nfs_direct_req_all() init_completion() nfs_direct_read_schedule_iovec() nfs_direct_wait() wait_for_completion_killable() nfs_direct_read_schedule_iovec() nfs_direct_complete() complete() nfs_direct_read_completion() nfs_direct_complete() complete() Signed-off-by:
-
