- 26 Sep, 2006 40 commits
-
-
Andrew de Quincey authored
Replaced with dvb_attach() Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Acked-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by:
-
Andrew de Quincey authored
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by:
-
Andrew de Quincey authored
Add dvb_attach() macro and supporting routines Signed-off-by:
-
Andrew de Quincey authored
Rewrote _write() calls to use write() op. Signed-off-by:
-
Andrew de Quincey authored
Convert SEC drivers to new frontend API Signed-off-by:
-
Andrew de Quincey authored
Add write() op Add release_sec() op Add change misc_priv->sec_priv data field Acked-by:
-
Adrian Bunk authored
Since av7110.c is the only file actually using something from this header, there's no reson for other files to Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Mike Isely authored
This change causes the pvrusb2 driver to limit horizontal resolution to be only 720 if 24xxx device hardware is being used. This is a workaround for an unsolved problem in the driver where if the resolution is set to something other than 720 the video quality will be _seriously_ degraded. It only happens on 24xxx devices (29xxx are unaffected by the problem and unaffected by this change). Once the problem is finally solved, this small change can be removed. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
The internal control implementation in the pvrusb2 driver normally encodes integer range limits using literal values in a const structure. This change adds two function pointers, which if not null will be called through in order to determine integer min / max values. Signed-off-by:
-
Mike Isely authored
The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding limits on the range for allowed resolution, but it would be much better if we instead just queried the internal control for these values. This then opens the door for the driver to adjust these limits based on the detected hardware. Signed-off-by:
-
Mike Isely authored
Fix a few miscellaneous issues in the pvrusb2 driver related to use of the new mpeg controls. This also should fix problems involving update of the saa7115 / cx25840 configuration as control changes are made. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Trent Piepho authored
A buffer was set just before an if block, and then again in both branches of the if. Obvious coding error. Signed-off-by:
-
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
David Bussenschutt authored
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by:
David Bussenschutt <buzz@oska.com> Signed-off-by:
-
Peter Naulls authored
This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by:
Peter Naulls <peter@chocky.org> Signed-off-by:
-
Michael Krufky authored
This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by:
-
Eric Thomas authored
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by:
Eric Thomas <ethomas@claranet.fr> Signed-off-by:
-
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since I don't have such hardware Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
All radio devices use an obsolete mode of opening/release driver. Since this is not V4L1 core, better to keep the method available for more time than to rewrite open/release without a radio device to test, since the newer method is much more complex than the previous one (although providing support for multiple opens and multiple devices). Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Driver conversion to V4L2 API. Require some testing, since this obsolete hardware is not common those days. Signed-off-by: -
Mauro Carvalho Chehab authored
Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: -
Hartmut Hackmann authored
It is just another Lifeview clone Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
The change is just an additional PCI ID Signed-off-by:
-
Hartmut Hackmann authored
Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by:
-
Alexander Tuschen authored
Ok, here is the working patch for the Freecom DVB-T stick with USB-ID 14aa:0225. It uses the Firmware-file, wich Erich Focht created and wich can be obtainded from http://home.arcor.de/efocht/dvb-usb-wt220u-fc03.fw Also the original patch is from Erich. It adds the proper USB-IDs and I only had to change the endpoint of the MPEG-2 data-transfer to 0x86. Signed-off-by:
Alexander Tuschen <atuschen@web.de> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NetLabel]: update docs with website information [NetLabel]: rework the Netlink attribute handling (part 2) [NetLabel]: rework the Netlink attribute handling (part 1) [Netlink]: add nla_validate_nested() [NETLINK]: add nla_for_each_nested() to the interface list [NetLabel]: change the SELinux permissions [NetLabel]: make the CIPSOv4 cache spinlocks bottom half safe [NetLabel]: correct improper handling of non-NetLabel peer contexts [TCP]: make cubic the default [TCP]: default congestion control menu [ATM] he: Fix __init/__devinit conflict [NETFILTER]: Add dscp,DSCP headers to header-y [DCCP]: Introduce dccp_probe [DCCP]: Use constants for CCIDs [DCCP]: Introduce constants for CCID numbers [DCCP]: Allow default/fallback service code.
-
