- 07 Oct, 2010 7 commits
-
-
stephen hemminger authored
Remove dead code and make some functions static. Compile tested only. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
Drop legacy includes since 2.4.x Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
John Heffner authored
This looks like a simple typo that has gone unnoticed for some time. The impact is relatively low but it's clearly wrong. Signed-off-by:
John Heffner <johnwheffner@gmail.com> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
-
David S. Miller authored
-
Krzysztof Oledzki authored
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by:
Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by:
-
Eric Dumazet authored
This is the second step for neighbour RCU conversion. (first was commit d6bf7817 : RCU conversion of neigh hash table) neigh_lookup() becomes lockless, but still take a reference on found neighbour. (no more read_lock()/read_unlock() on tbl->lock) struct neighbour gets an additional rcu_head field and is freed after an RCU grace period. Future work would need to eventually not take a reference on neighbour for temporary dst (DST_NOCACHE), but this would need dst->_neighbour to use a noref bit like we did for skb->_dst. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- 06 Oct, 2010 33 commits
-
-
Krzysztof Piotr Oledzki authored
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by:
-
Krzysztof Piotr Oledzki authored
before: bonding: bond0: link status definitely up for interface eth5 bonding: bond0: link status definitely up for interface eth0 after: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Client statistics need to be initialized to -1 Signed-off-by:
-
Dmitry Kravkov authored
This patch does not include any functional changes. The changes are: empty lines, indentation and comments. Signed-off-by:
-
Dmitry Kravkov authored
Return proper L2 and L5 SPQ (slow path queue) credits. Previously, all SPQ events were counted as L5 types. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Decide which interrupt mode to use (MSI-X, MSI, INTa) only once in probe() and initialize appropriate structures. Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
57712 HW supported with same set of features as for 57710/57711 Signed-off-by:
-
Dmitry Kravkov authored
The field is now accessed from different contexts. Signed-off-by:
-
Dmitry Kravkov authored
MF (multi-function) mode supported not only by 57711E (E1H) devices, but also by coming 57712E, then we use more generic names. Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by:
-
Dmitry Kravkov authored
New firmware files for all bnx2x devices Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Michael Chan authored
Initialize the rings only during cnic_uio_open() and shut them down during cnic_uio_close(). Check for the new bit CNIC_LCL_FL_RINGS_INITED before checking for ring interrupt. Signed-off-by:
-
Michael Chan authored
The pfid (physical function ID) is the same as PCI function on production devices. The pfid for future devices will be different and will be used for internal memory offsets. Signed-off-by:
-
Michael Chan authored
Preparation work for upcoming firmware interface changes. Signed-off-by:
-
Matt Carlson authored
Commit 2ddaad39 entitled "tg3: Use netif_set_real_num_{rx,tx}_queues()" added a new call to netif_set_real_num_rx_queues in tg3_enable_msix(). This call also needs to be added to the legacy path to correctly reflect the actual number of rx queues. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Acked-by:
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Octeon: Place cnmips_cu2_setup in __init memory. MIPS: Don't place cu2 notifiers in __cpuinitdata MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin MIPS: Alchemy: Resolve prom section mismatches MIPS: Fix syscall 64 bit number comments. MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls. MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN MIPS: N32: Fix getdents64 syscall for n32 MIPS: Remove pr_<level> uses of KERN_<level> MIPS: PNX8550: Sort out machine halt, restart and powerdown functions. MIPS: GIC: Remove dependencies from Malta files. MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC. MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask. MIPS: Audit: Fix hang in entry.S. MIPS: Document why RELOC_HIDE is there. MIPS: Octeon: Determine if helper needs to be built MIPS: Use generic atomic64 for 32-bit kernels MIPS: RM7000: Symbol should be static MIPS: kspd: Adjust confusing if indentation MIPS: Fix a typo.
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: always use sb->s_bdi for writeback purposes
-
git://xenbits.xen.org/people/sstabellini/linux-pvhvmLinus Torvalds authored
* 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: do not initialize PV timers on HVM if !xen_have_vector_callback xen: do not set xenstored_ready before xenbus_probe on hvm
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Initialize total_len in fuse_retrieve()
-
Rasesh Mody authored
As suggested by Stephen Hemminger: 1) Made functions and data structures static wherever possible. 2) Removed unused code. Signed-off-by:
Debashis Dutt <ddutt@brocade.com> Signed-off-by:
Rasesh Mody <rmody@brocade.com> Signed-off-by:
-
Rasesh Mody authored
This fix handles the case when IRQ handler is called (for shared IRQs) even before the driver is ready to handle interrupts. Signed-off-by:
-
Eric Dumazet authored
fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by:
-
Eric Dumazet authored
caif_connect() might dereference a netdevice after dev_put() it. It also doesnt check dev_get_by_index() return value and could dereference a NULL pointer. Fix it, using RCU to avoid taking a reference. Signed-off-by:
-
Flavio Leitner authored
Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by:
Flavio Leitner <fleitner@redhat.com> Signed-off-by:
-
